Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVODE valves are used in hydraulic systems as a controlling and blocking element for double-acting actuators. They allow for smooth descent of the actuator under load. The opening pressure value is set using screws (adjustment with an Allen key, locked with a counter nut). The set value must be 30% higher than the pressure value resulting from the load of the receiver. The standard opening pressure of check valves is 0.5 bar. The valves are equipped with mounting holes. Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF designed for high-pressure hydraulic systems. Normally closed (NC) variant. The valve is equipped with mounting holes (visible in the photo). couplings to be ordered separately. Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Protection class: IP65. Working pressure: 250 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPFD valves divide the flow of pumped hydraulic oil (1) into two equal flows (2a and 2b) supplying consumers. The division error can be a maximum of 10% (assuming the pressure difference between 2a and 2b does not exceed 120 bar). The valves are equipped with mounting holes (visible in the photo). Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF designed for high-pressure hydraulic systems. Normally open (NO) variant. The valve is equipped with mounting holes (visible in the photo). couplings to be ordered separately. Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Protection degree: IP65. Working pressure: 250 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VSF valve supplies hydraulic oil from the connection P1 or P2 to the connection U. The power source is the connection with higher oil pressure (the second connection P1 or P2 is automatically blocked using a movable ball). The valves are equipped with mounting holes. Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVS30 valves are used in hydraulic systems as a component to establish the supply sequence of several actuators connected to a single power source. In a system with two actuators, the valve is installed between the power source (1) and the actuator (2) that is to be supplied second. The opening pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). The valves are equipped with mounting holes. Special attention should be paid not to set the pressure value higher than 260 bar (maximum operating pressure for the aluminum body). Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
