Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule Z1T (PH) for rubber hydraulic hoses type 1SN(R1AT), 1ST, 1SC, 2SC, 2TE. Assembly - external skiving (1ST), without skiving (1SN(R1AT), 1SC, 2SC, 2TE). Use for fittings hydraulic (PH). Diameter D1 - outer diameter. Material: AISI 316.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing metal - metal, cone uniwersalny 24°/60° (DKL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric male thread, 60° cone sealing (CES), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with a BSPT male thread of excellent durability and resistance to vibration. intended for connection pneumatic tools with installations air. Material: steel carbon. Working pressure: 15 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 SUPERCAT (SFS), angled 45°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt without washers for fitting BANJO type - Z, metric. Material: AISI 316 or AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with female thread walcowym NPSM, 60° cone sealing, (DKR). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF male thread, 74° cone sealing (AGJ). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt imbusowa with washer, in komplecie (4 szt.) for flanges SAE, for serii 6000, DIN 912. class hardness: 12.9. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP female thread with a nut, inverted 60° cone sealing - type TOYOTA. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling full-bore Nitto Kohki series TSP CUPLA with fitting for hose o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Particularly recommended for high-viscosity fluids, e.g. lubricants. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2", 3/4", 1"), 20 bar (1.1/4", 1.1/2"), 15 bar (2"). Operating temperature: from -20°C to +80°C (NBR), from -20°C to +180°C (Viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BP7 for hoses type R6, R7, R8 and 1SC. Assembly - no skiving. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 - outer diameter. Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP female thread with a nut, 60° sealing cone (DKR), angled 180°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric male thread, 60° cone sealing (CEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with male thread tapered NPT, sealing na gwincie (AGN), possible 60° cone sealing. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 SUPERCAT (SFS), angled 90°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with fitting for hose of excellent durability and resistance to vibration. Intended for connecting pneumatic tools to an air installation. Material: steel carbon. Working pressure: 15 bar. Operating temperature: from -20°C to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 3000 (SFL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF male thread, sealing face with an O-ring (ORFS). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread with a nut, 74° cone sealing (DKJ), angled 90°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with a BSPT female thread of excellent durability and resistance to vibration. intended for connection pneumatic tools with installations air. Material: steel carbon. Working pressure: 15 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with fitting for hose of excellent durability and resistance to vibration. intended for installations water. Material: brass. Working pressure: 10 bar. Operating temperature: from -20°C to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type (use ferrules additionally marked with the letters "-PH" at the end of the index). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread with a nut, 74° cone sealing (DKJ), angled 90°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 (SFL), angled 45°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF female thread with a nut, 74° cone sealing (DKJ), angled 45°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt double without washers for fitting BANJO type - Z, metric. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BP5 for hoses termoplastycznych type OL5 or VE5. Assembly - no skiving. Diameter D1 - outer diameter. Diameter D2 - inner diameter. Diameter D3 - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange solid SAE 3000 with czterema otworami for a bolt hex socket DIN 912, class 12.9; light version. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling full-bore Nitto Kohki series TSP CUPLA with a BSPT male thread o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Particularly recommended for high-viscosity fluids, e.g. lubricants. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2", 3/4", 1"), 20 bar (1.1/4", 1.1/2"), 15 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric male thread, 60° cone sealing (CES), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BES), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with UNF male thread, 74° cone sealing (AGJ). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with a BSPT male thread of excellent durability and resistance to vibration. Intended for water installations. Material: brass. Working pressure: 10 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), for a bolt with metric thread (RNM). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule ZF2 for rubber hydraulic hoses type 2ST (R2A) or 4SP. Assembly - external skiving. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 - outer diameter. Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), for a bolt with metric thread (RNM). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOL), angled 90°, series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug without valve Nitto Kohki series HI CUPLA with fitting for hose of excellent durability and resistance to vibration. intended for connection pneumatic tools with installations air. Material: steel carbon. Working pressure: 15 bar. flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
