Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling plug with a flange PN 10 with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Working pressure: up to 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling dry-break DDC with a thread internal BSP with aluminum wide used in transport road, railway, marine, aviation and in industry petrochemical, chemical and pharmaceutical. installed po side tanker. The design plug based is na a valve piston (opens during connection and closes at disconnection coupling, co eliminates leakage liquids). meets all requirements regarding Safety, protection environment natural and reliability at transferring hazardous, toxic or costly liquids. made acc. to standard NATO STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). coupling meet requirements ATEX, TDT, ADR, RID, IMDG, the directive pressure 97/23/WE. has also recommendation council european industry chemical CEFIC. Sealing: O-ring (Viton), Flat gasket (PTFE). pressure working: 10 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality, strong clamp with a hinged closure for heavy loads and rolled band edges, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design provides even pressure around the entire circumference, ensuring optimal sealing. The movable bridge allows repeated installation without removing the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three spot welds on the band, a high-strength screw with a spacer, and securing half-rollers guarantee maximum, reliable pressure. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. The W4 version is made entirely of stainless steel and is intended for demanding applications requiring high corrosion resistance – marine applications and the food industry. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Important! Exceeding the tightening torque will bend the screw housing; installation with pneumatic tools is not recommended. The band and bridge are made of AISI 430 steel, the screw and rollers of galvanized steel. The maximum working pressure of up to 45 bar depends on the hose type and the clamping diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality three-way ball valve "L" type SK3L with a thread internal BSP, intended for high-pressure installations hydraulic. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact, two-piece medium-pressure ball valve intended for demanding general applications. It can be used for precision fittings (instrumentation) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. Intended for in-line mounting. The valve is characterized by a large size range to ensure an adequately large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. Each valve is pressure-tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Material the body: steel AISI 316. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: from -42°C to +204°C. pressure working: up to 137 bar (depending od temperature). connection: BSP female.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShut-off valve type V3V L, two-position, three-way, with venting of the pneumatic system, in a version with a threaded connection with an O-ring on one side and a push-in connection on the other (thread - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA valve designed for unloading IBC containers, allowing them to be unloaded without having to remove the cover. For mounting on the upper fill covers with a 2" threaded hole. Material: polypropylene. spring: steel stainless. Sealing: polyethylene (LDPE). Opening pressure: 0.069 bar (1 psi).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMost popular type Due to high resistance mechanical material. widely used for standard applications (air, water, oil, gaz) ale also for connections type „choke and kill”, fracturing and cementing. set: part male, female + A nut. color: red (part male, female), blue (A nut). Material: steel chromium-molybdenum 4130. Connection: NPT female. sealing: metal/metal (cone) + additional gasket edge (NBR). pressure: 15000 PSI (1034 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling SJ with single bearing, intended for connections rigid or flexible lines, when required is, to not occurred carrying torque twisting on other element installation. found use in industry chemical and petrochemical. coupling not is resistant to action large torque bending, in such case recommended is use coupling swivel with double bearing - heavy duty (available on request). coupling Meets the requirements of, the directive pressure 97/23/EC (PED), TDT, TÜV, Apragaz. on request available are also in various combinations the following Connections: thread BSP, NPT, BSPT, ACME, for welding-in, flange PN, ASA, TW, TTMA, coupling grooved. Material: steel AISI 316. Operating temperature: od -40°C up to +250°C. rotation: free, swing. Working pressure: up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling bulkhead push-in straight, type R10, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting plug-in systemu STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized. sealing: NBR (O-ring), teflon (ring oporowy).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle rubber for guns CEJN for Applications na delicate surfaces; direct installations na tube. Available diameter: Ø 14 mm, Ø 25 mm and Ø 34 mm. pressure working: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hand lever intended for standard-type two-way and three-way ball valves. For correct selection, check the SW dimension of the square valve stem of the ball valve. Material: alloy zinc.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary head ST-357 with a ceramic insert, spray angle 20°. Marked with different colours to identify the calibration. Material: brass and plastic plastic. Working pressure: 100 - 250 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread external NPT, type 100HM, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic fitting (type P - with a special "tail" for a thermoplastic hose) with a thread internal BSP, sealing on a 60° cone (DKR). Intended for crimping in UHP thermoplastic hoses by means of a clamping ferrule appropriate for the hose type. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange straight INTERLOCK SAE 3000, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with a hexagonal head with a BSPT male thread (above 3/8" plug is available with head octagonal). Material: steel AISI 316. Working pressure 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type SF with a flat seal, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Use a UM type nut (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose SUPERFLEX RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). version of reinforcement textile and a spiral steel securing against collapse bent hose. has „soft” fitting, free of spiral steel, enabling easy and tight installing na spigots using straps. serrated externally The design hose bends easily, replacing in many cases original formed connector and ensuring unobstructed solid flow even at strong bending. The design a connector corresponds standard SAE J20 R5 and is resistant na temperature and na fluids cooling used in automotive. no data regarding pressure working. Operating temperature: from -40°C to +125°C. Material a connector: black rubber EPDM. Reinforcement: textile braid + A spiral steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality, very flexible, resistant to twisting and kinking A universal hose industrial. used in industry, construction, agriculture, quarries, mining and road construction, in industry petroleum and shipbuilding. Layer inner resistant to action oil, fats, light chemicals, air, kerosene (naphtha), cold and hot water. Layer outer has very good resistance to abrasion and on fats animal and oils. Due to high strength and low expansion especially recommended for hose reels drum. outer resistance to flame compliant with the standard MSHA 2G-14C/39. Non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: an aramid braid, for 2" a synthetic braid. Outer layer: yellow rubber Carbryn® (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for push-on couplings designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 304 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rubber cover limiting the possibility of the hose kinking at the fitting and limiting the possibility of exceeding the minimum bending radius. For use with standard high-pressure washing lines DN6. color cover: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover GT35 made with very dense fabric polyester. intended for protection single hoses or bundles lines hydraulic and pneumatic. has good resistance mechanical and na oils and products organic. It protects the hose and secures the operator against oil spray in case of hose bursting. Material: polyester. Operating temperature: +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA ring securing against unintended disconnection for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum) with outer diameters from 12 mm to 28 mm). Material: plastic plastic. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA quick fill / empty cover for an IBC container with two air vents. The cover is supplied with a gasket. Size of the fill hole thread: 2″ BSP Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press TUBOMATIC H25 PI with pneumatic drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA switch bistable 3-position VRM-313 N with short a lever for valve VME. For mounting, the VME1-000 adapter is required. color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial, high quality, ergonomic Gun NITO II for water. A handle separated od path flow hot water, co ensures comfort the operator. parts internal with aluminum, brass and steel stainless. housing with high-strength plastic Orgalloy resistant to impact. seal: EPDM / HBR. has smooth adjustment flow and lock trigger. interchangeable nozzles outlet. Working pressure: 25 bar. Flow rate: 20 ÷ 60 l/min (5 bar) depending on mounted nozzle. Flow rate with nozzle standard: 40 l/min. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with a BSP male thread with a gasket flat type AI 13485 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple 45° DIN 71412 B serving for introduction substances lubricating between cooperating surfaces in order to reduction resistances friction and processes wear. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStacking bolt for clamp DIN 3015 standard type 100/101 with a thread external and internal metric, intended for mounting clamps one na the other. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnion with 2 x a thread internal BSP intended for use in pipe connections of industrial installations. sealing flat between internal element. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal tape coated single-acting adhesive binding at jej tensioning. designed for protection hoses, cables and pipes against intense radiating heat and flames. wall thickness tape to ok. 0.76 mm. at mounting recommended is overlap 50%. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "Y", 2x BSP female thread, 1x BSPT male thread, type A24, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "T" through-flow, type R22, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA standard gasket for the female part (socket) of a CAMLOCK coupling. Material: Viton. Operating temperature: from -40°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 1. Antistatic and flame-retardant, it ensures a high level of work safety. very pliable and compressible, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
