Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for CAMLOCK DP coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: AISI 316 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnvelope gasket for the female part (socket) of the CAMLOCK connector. Material: PTFE/Viton. Operating temperature: from -40°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC non-threaded outlet facilitates liquid discharge from the tank, available in black and white. A two-part cap/cover should be used for outlet installation. Material: polypropylene. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK DU connector socket with internal BSP thread (flat PTFE gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on the size of the coupling. Material: polypropylene reinforced with fiberglass. Lever: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® C socket with a hose end for RS clamp is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. During the closing of the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® CRS socket is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK AU connector plug with internal BSP thread (flat PTFE gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble plug of CAMLOCK AA connector made according to the American military standard MIL-C-27487 (A-A-59326). Commonly used as a transfer connector, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: EPDM. Operating temperature: from -30°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® B socket with BSPT external thread is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. During the closing of the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® B socket is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. The coupling size 1/2" has a thread of 1/2" and a socket of 3/4". Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on coupling size. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SAFLOK® D socket with BSP internal thread is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. During the closing of the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® D socket is compatible with other CAMLOCK couplings made according to the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. The coupling size 1/2" has a thread of 1/2" and a socket of 3/4". Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: NBR. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® C socket with hose end is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the socket levers. When closing the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® C socket is compatible with other CAMLOCK couplings made according to the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK coupling chain. Length: 200 mm or 300 mm. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® DU socket with BSP internal thread is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. When closing the levers, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® DU socket is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. The coupling size 1/2" has a thread of 1/2" and a socket of 3/4". Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard handle (lever) for CAMLOCK couplings, type HR. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SAFLOK® DC cap is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the lever of the socket. When closing the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® DC cap is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (3/4" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnvelope gasket for the female part (socket) of the CAMLOCK connector. Material: PTFE/NBR. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoated gasket for the female part (socket) of the CAMLOCK coupling. Material: FEP/silicone. Operating temperature: from -60°C to +205°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK CR (reductive) connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum. Levers: brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK AU connector plug with internal BSP thread (flat polyurethane gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK DU connector socket with internal BSP thread (flat polyurethane gasket) manufactured according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing for CAMLOCK coupling, type R. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connector, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector plug with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: black neoprene (also available in white - index suffix "-NF"). Operating temperature: from -50°C to +107°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK ER connector plug (reduction) with a ribbed end for hose made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPin for CAMLOCK connection, type P. Material: AISI 304 steel.
