Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded UNF SAE fitting, 45° cone, for 3055 type air conditioning hose. Material: steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded end UNF, with socket, for air conditioning hose type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° crimped end with internal thread and nut, type FAG, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° crimped end with external thread and nut, MAG type, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 90° crimp fitting for PTFE brake hoses. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 90° crimp fitting for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping end for welding to Teflon brake hoses. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with internal thread and nut, type FAGP, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external and internal thread, type MFALP, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external thread and nut, type MAGP, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external thread, type MALP, for Teflon brake hoses (seal external cone). Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "Y" type tee BURGACLIP for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle connector BURGACLIP for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for air conditioning hose type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for thick-walled hoses for air conditioning type 3055 and 3056. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel securing hose (for pressure hoses), coated with plastic. Cable diameter: 3 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided that they are properly connected. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Wall resistance across the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available on special order. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong general-purpose PVC hose with specially reinforced wall and braid construction. Good resistance to kinking. Designed for water, air, and light chemicals in agriculture, horticulture, and industry. Inner layer: black PVC. Reinforcement: polyester braid. Outer layer: yellow PVC. Working pressure at 20°C: 10 bar. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for R12/R134 adapter protecting the valve from various contaminants and from refrigerant leakage from the system (adapter index: BU-7034/7036 or BU-7035). Material: polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamping nut for threaded ends of PTFE brake hoses. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProtective grommet intended for DN 3 Teflon brake hoses. Material: rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProtective grommet designed for DN 3 Teflon brake hoses. Material: rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp ring intended for bolted connections for the installation of Teflon brake hoses. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose for oils and fuels. Lighter and more flexible than standard rubber hoses. Flat at rest, facilitating handling and storage. Designed for the transfer and loading of petrochemical products, oils, and fuels in refineries, industry, and transportation. Used for fueling ships, cleaning tanks, firefighting, and military applications. The hose is constructed with a high-strength polyester-polyamide braid, fully embedded in an NBR/PVC compound. It features copper wires ensuring electrical continuity between the hose ends—provided proper connection to the fittings. The inner surface of the hose made of NBR/PVC is smooth, causing no flow loss, while the outer surface made of NBR/PVC is slightly longitudinally ribbed, enhancing abrasion resistance and protection against contact with hot elements. Externally resistant to abrasion, ozone, weather conditions, oil, fuels, and a wide range of chemicals. Does not require cleaning and drying. Resistant to longitudinal loads—during unwinding and pulling (the longitudinal force should never exceed 1/3 of the specified breaking strength; the installation of fittings should consider the longitudinal force). Standard color is greenish-gray (army green). Hose material: greenish-gray NBR/PVC compound embedded in a polyester-polyamide braid during the hose extrusion process. Working pressure: from 16 to 20 bar, depending on the hose diameter. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FLOWSAFE float has been designed for all hoses used in the marine industry. This particularly applies to supply hoses in connections between the vessel and the drilling platform. Thanks to the floats, the hoses remain on the water's surface, preventing damage from the vessel's propeller and allowing the floating unit to maneuver. The float can also serve as a protective cover for the hose. It can be used for both pressure hoses (without a spiral) and suction-pressure hoses (with a steel spiral) in sizes 3", 4", and 5". It is secured with stainless steel clamps placed in the grooves of the float. When using floats for pressure hoses, a special steel hose must also be used to attach the float to the hose and prevent its displacement when the hose is being handled and is not under pressure. It is flexible, unsinkable, and non-absorbent (pores 100% closed). It does not shrink or deform. UV resistant. Material: Bacell® - a special EVA foam. Load capacity: 16 kg. Weight: 2 kg. Volume: 18 dcm³.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum washer intended for Banjo screws. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bolt for BANJO connection with a relief, intended for securing brake lines. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bolt for BANJO connection, intended for securing brake lines. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bolt for BANJO connection, intended for securing brake lines. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo connection bolt, intended for securing brake lines. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber molded hose without reinforcement, flexible and stretchable (in diameter) with a special corrugated shape, ensuring resistance to kinking when bending and the ability to cut into sections of required length. Produced in lengths of 1 m, which can be cut and easily shaped in installation. Available in a basic version made of EPDM rubber, for water, cooling fluids, resistant to diluted acids and bases, at elevated temperature and ozone. Operating temperature range from -40°C to +135°C (TUBANO) and in a version with increased external oil resistance, made of a different synthetic rubber. Operating temperature range from -30°C to +120°C (TUBANO OIL). Hose material: molded EPDM rubber. Working pressure: 1.5 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee (coupling) with sleeves for thermoplastic hose FR 5 DN2 (1/12"). Material of the tee: brass. Material of the sleeve: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-mounted mounting sleeve for air conditioning hose ends type 3055. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-in mounting sleeve for air conditioning hose ends type 3056. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp sleeve for OBHN type Teflon brake hose. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-T clamp sleeve for smoothbore and HYPERLINE V teflon hoses. Material: AISI 304 or 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, universal laboratory hose free of phthalates (DEHP). An excellent solution for complex laboratory equipment installations requiring small bend radii and multiple curves. This ultra-soft hose is resistant to twisting and kinking and remains flexible at low temperatures (down to -55°C). Due to its softness, it does not require high forces for compression, making it an ideal solution for peristaltic pumps with low torque or battery-powered. It has a longer lifespan in peristaltic pump applications compared to typical silicone hoses, while also possessing good chemical resistance to a range of corrosive media (acids, bases, salts, alcohols). Compliant with FDA requirements for food contact and REACH. Sterilization only with ethylene oxide. Full hose roll length: 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special, DEHP-free). Maximum operating temperature: +52°C. Brittleness temperature: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible rubber pressure hose, intended for air, cold and hot water, and light chemicals (except acids). Resistant to acetates and ketones. Can be used for dispersive water-based epoxy and polyurethane paints. Not suitable for oils, fuels, aromatic hydrocarbons, cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. For chemical applications, we recommend contacting Tubes International. The hose has a strong construction and low elongation under pressure. Suitable for use on reels. Inner layer electrically conductive (R<106 Ω, EN ISO 8031), outer layer resistant to ozone and weather conditions. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - polyvinyl alcohol). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose for demanding, versatile applications in the food industry. Excellent for the transfer of various types of food products such as: olive oil, wine, beer, fruit juices, milk, fats, and alcohols with a concentration of up to 96%. The inner layer is odorless and tasteless. It does not contain phthalates and bisphenol A, as well as polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for heavy metals. The outer layer is resistant to weather conditions and ozone. Standards and requirements: Food industry, food contact 1935/2004/EC and EC 2023/2006/EC (GMP). The inner layer complies with FDA 21 CFR 177.2600, BfR XXI cat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible reinforced hose designed for higher pressures. Made of polyether - polyurethane, free of plasticizers, exceptionally resistant to abrasion and tearing, characterized by a small bending radius and flexibility even at low temperatures. Withstands cyclic temperature changes. Resistant to oils, greases, fuels, and a range of chemicals. Used in various industrial sectors: transfer of abrasive and viscous products, sludges and pastes, transfer of granules and powders, lubrication and degreasing, for cooling fluids in automotive applications, for air in pneumatics and industrial automation. Used in the food and cosmetic industries - meets FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 requirements for food contact and NSF-61 for use with drinking water (with hose length limitations depending on diameter). Full hose roll length 30 m (from internal diameter 31.8 mm - 15 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: tygothane® - polyurethane - polyether (PU). Operating temperature: from -73°C to +82°C. Brittleness temperature: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
