Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning dry ice – granulate solidified dioxide carbon. cleaning dry ice used is for removing coatings, adhesives, deposits etc. in many fields industry. advantage process is no damage cleaned surface, no aggressive substances chemical, no water in process (in comparison for cleaning high-pressure water), no residue abrasive (in comparison with sandblasting). dry ice (solidified dioxide carbon) has temperature for -78.5°C (temperature melting), moulds granulate and in during process sublimates for the molds gas. hose DRY ICE designed is specially for conveying dry ice. Layer inner smooth, with antistatic rubber synthetic resistant to abrasion and low temperature. Layer outer antistatic, resistant to abrasion, conditions atmospheric and ozone. mounted with use quick couplings of specialist guns for cleaning dry ice. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -55°C up to +130°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery o smaller diameters intended for conveying wine, juices fruit, beer, water. It can be used for hose reels drum. completely free of components origin animal, phthalates, plasticisers and nitrosamines. highly resistant to processes cleaning and disinfection used in industry food. Layer inner free of taste and odour. Layer outer resistant to abrasion and aging. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: a synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C up to +80°C (momentarily up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose fuel of special rubber NBR resistant to ester methyl acids fatty oil rapeseed (RME). Reinforcement synthetic a braid textile. Layer outer with rubber chloroprene CR, antistatic, self-extinguishing, resistant to abrasion, temperature and aging. especially recommended for biofuels, based on esters methyl acids fatty (FAME) e.g. biodiesel B10, B20, B100. resistant to ester methyl acids fatty oil rapeseed (RME). It can be used also for ordinary oil drive. Inner layer: special NBR rubber. Reinforcement: textile braid synthetic. Outer layer: rubber CR. Working pressure: 15 bar. Operating temperature: od -30°C up to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth hose with natural (non-regenerated) polymer fluorine PFA (perfluoroalkoxy), material o properties close for PTFE. hose is characterized excellent chemical resistance, stability temperature dimensions and shape, very smooth, free of micro-pores surface inner and external, high strength pressure and resistance na bursting caused excessive stresses. good transparency hose allows na easy observation level or flow. resistant na radiation UV. intended for low-pressure installations aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Ze regard na excellent properties insulating (strength dielectric 3 ÷ 4 times greater od PTFE) used in industry electronic and semiconductors. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: PFA. hardness Shore (D) 60. temperature use: from -200°C to +260°C. pressure working: od 7 bar for 19.5 bar - depending on diameter and wall thickness wall hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVersion hose PTFE SMOOTHBORE o thickened wall of specially processed PTFE (reduced micro-porosity) for applications with gases high-pressure and other substances penetrating, in double braid steel. at temperature use above +130°C, maximum pressure working given in parameters, should reduced o 0.75% na each 1°C rise temperatures. assembly: use fitting and ferrules series AF-TL... Material hose: smooth PTFE. Reinforcement: double braid of steel 304. pressure working: from 180 bar to 225 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose CHEMFLUOR TH is flexible a hose PTFE and intended is for high-pressure installations hydraulic, pneumatic and gas. Layer inner made with conductive PTFE prevents accumulation charges electrostatic. Material hose: black, conductive PTFE. Reinforcement: braid of steel AISI 304. temperature use: from -50°C to +200°C. pressure working: 345 bar. pressure bursting for 20°C: 1100 bar. pressure bursting for 200°C: 820 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changing temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength na stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWDB-10 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. pressure working: from 40 bar to 350 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength na stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. double braid whereas, should use at higher pressures and tam, where available (in permissible limits) greater bending or kinking hose. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. pressure working: from 70 bar to 360 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel AISI 316, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130ºC maximum pressure working given in parameters should reduced o 0.75% na each 1ºC above tej temperatures. for example at temperature 170ºC maximum pressure working for hose AF-SWSB-316-06 is: 240 bar – (170ºC-130ºC) x 0.75 = 240 bar – 30% = 168 bar. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 316. pressure working: from 80 bar to 240 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying and handling crude oil, petrochemical products and drill cuttings mixed with crude oil (up to 50% aromatic compounds). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic. It has copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on North Sea platforms, successfully used in onshore applications. On special order available also versions o higher pressure working (20 bar, 27 bar), with specified force breaking at tension (2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 17 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose delivery intended for conveying and distribution liquid products industry petrochemical, containing up to 50% hydrocarbons aromatic (e.g. diesel - oil drive, oil heating, gasoline up to 50% aromas). suitable for pumps for refuelling. Layer inner with black, smooth rubber synthetic. Reinforcement cord synthetic. has two copper cable ensuring continuity electrical between fitting hose (resistance R < 100 Ω between fitting) – under a condition correct connection cables for ends. Layer outer with rubber synthetic high quality resistant to oil and conditions atmospheric. hose compliant with requirements standards EN 1360:2013 type 1 type M, for hoses for systems distribution fuels. possibility order length for 120 meters. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very strong delivery hose for aviation fuel, intended for direct pressurised refuelling of aircraft. It can also be used in fuel transfer operations in airport tankers – dispensers, in cases not requiring high vacuum. can be wound on drums. Suitable for aviation fuel for turbine engines (aviation kerosene, kerosene, e.g. Jet A1), aviation petrol and fuels with an aromatic hydrocarbon content up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic. Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type C/Ω) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Hoses with fluorescent marking visible at night are available on special order. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTraditional, known and proven od lat, hose with red rubber natural. easy for installation thanks to its softness (hardness 45° Shore – A), flexible and flexibility. resistant na abrasion, o low permeability for gases and sound resistance na acids and bases. used for liquids and gases for many applications industrial and in laboratories. meets requirements FDA for contact with food. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 25 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). temperature use: from -30°C to +70°C (125°C for moist hot). temperature brittleness: -40°C. Hardness: 45° Shore (A). Density: 1.13 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose, PVC intended for water. It can be used for conveying water potable (short-term contact with water potable) – has issued in the Czech Republic certificate conformity with requirements 409/2005 Sb for this use (contact Tubes International). Do use in industry, agriculture, horticulture and use domestic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 10 bar to 17 bar - depending on the diameter hose. Operating temperature: from -5°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery of reinforcement steel and with layer external resistant na oil, for conducting steam saturated and superheated. Layer inner o sound resistance na high temperature and steam saturated. can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na oil, temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial, in particular tam, where required is resistance layer outer na oils, greases and other products petrochemical. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. hose VAPOFER EN ISO 6134 is version antistatic (R ≤10 6 Ω), compliant with the standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black rubber synthetic, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial hose high-pressure for water for cannons snow resistant to abrasion, aging, rotting, radiation UV, conditions atmospheric and ozone. designed for continuous use at high pressure. flexible in low temperature. thanks to coating outer in yellow color perfectly visible on snow, even in dusk. supplied with mounted couplings type CAMLOCK (socket C and plug E) in version high-pressure 60 bar of steel stainless AISI 316. available also other length lines DN52 (e.g. 25, 30 and 40 m). Maximum length hose 60 m. Inner layer: EPDM rubber. Reinforcement: double polyester braid. Outer layer: yellow, special coating resistant to abrasion. Working pressure: 60 bar. Operating temperature: od -40°C up to +80°C (water).
