Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with excellent temperature resistance and strength under elevated pressure made from a special, non-flammable polymer. It has a calibrated outer diameter. The material is resistant to aging and UV radiation, exhibiting good sliding properties which counteract material wear. The material is impermeable to gases, resistant to most concentrated bases and inorganic, organic acids, alcohols, and solvents at elevated temperatures. It has electro-insulating properties. The calibrated outer diameter allows for connection with plugs or fittings from leading manufacturers. Dimensional accuracy ensures consistent compressive strength even for hoses with larger diameters, making it suitable for a wider range of practical applications. Hose material: polyvinylidene fluoride PVDF. Working pressure: from 16 bar to 80 bar (depending on hose diameter). Operating temperature: from -50°C to +140°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for air, water, and other media. Characterized by flame resistance and resistance to welding sparks and hot metal shavings. Resistant to hydrolysis, biological corrosion, UV radiation, solvents, and detergents. Withstands a vacuum of 0.9 bar. Calibrated outer diameter allows compatibility with plug couplings. Hose material: flame-retardant polyurethane PUR. Working pressure: 20 bar. Operating temperature: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on hose diameter). Operating temperature: from -10°C to +80°C. Standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, specifically designed for automotive pneumatic brake system installations. It contains no plasticizers, does not stiffen, and is resistant to UV radiation. Available only in black. Standard: ISO 7628:2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C (for water-based media +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose for air, gases, water, and other media. Used in systems where there is a risk of electric charge accumulation and in explosion hazard zones. Compliant with the ATEX directive (2014/34/EU). Surface resistance R < 106 Ω. Resistant to hydrolysis, microorganisms, abrasion, and UV radiation. Calibrated outer diameter allows compatibility with plug couplings. Recommended for applications in the electronics industry, powder coating, explosion hazard zones, mining, conveyors, and part sorters. Working pressures are stated with a safety factor of 2:1 relative to the maximum pressure that does not cause hose damage. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on hose diameter). Operating temperature: from -30°C to +80°C. Vacuum: up to 0.95 bar (when under vacuum, the bending radius should be increased by 20%).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Particularly recommended for industrial or automotive installations of hot fluids (fuels, oils, refrigerants) or air, excluding water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -40°C to +150°C (for water-based media +70°C). Standard: DIN 73378, ISO 7628.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyethylene and aluminum pneumatic hose for use in pneumatic control systems. Very good chemical resistance of the outer layer allows operation in chemically aggressive environments. The reinforcement in the form of an aluminum coating increases the hose's durability, enabling the installation of long sections without additional supports. An additional advantage is its so-called shape memory, allowing installation in hard-to-reach places. It can operate buried without the need for additional coverings. Due to its unique construction, the hose is about 5 times lighter than standard pneumatic hoses. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible double hose used in pneumatic systems, hydraulic systems, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Maintains flexibility at low temperatures. Shore hardness (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on hose diameter). Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-hose in an external cover made of black polyurethane, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Different colors of hoses allow for easy identification of individual power circuits or different media. Number of hoses: 2. Hose material: polyamide PA 12 (nylon). Working pressure: from 7.5 bar to 33 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -20°C to +80°C (for fluids containing water up to +65°C).
