Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial pressure gauge 63 mm with rear connection for installation FM 633, manufactured according to standard EN 837-1 in a stainless steel housing with glycerin filling. The pressure gauge is resistant to shocks, vibrations, humidity, with increased resistance to sudden pressure spikes, intended for simple measurements of low-viscosity liquids, vapors, and gases that do not corrode copper alloys and do not crystallize. The glycerin filling of the gauge helps reduce pointer fluctuations and minimizes wear on moving parts of the mechanism during pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge, which could damage internal components. The measurement range should be selected according to the working pressure, so that the constant or slowly changing pressure does not exceed 75% of the range; the pulsating pressure does not exceed 60% of the range, and pressure impulses do not exceed the maximum range. Dial diameter: 63 mm. Material: housing - AISI 304 steel, window - plexiglass, connection - brass, mechanism - brass and copper alloys, filling - glycerin. Accuracy class: 1.6. Ambient temperature: from -40°C to +65°C. Medium temperature: maximum +60°C. Rear connection: GZ 1/4" BSP (G 1/4 B, EN ISO 228-1, B indicates thread tolerance).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter nipple with external BSPT threads on both sides for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 101 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. For size group 0, there is one hexagon head screw; for size groups 1 to 6, there are two hexagon head screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp according to EN 14420-3 (DIN 2817) designed for securing hoses at ends with a safety flange. DN - internal diameter of the hose x wall thickness of the hose. Material: AISI 316 steel. Working pressure: 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-part clamp according to DIN 20039 B, with hooks ("claws") on the flange to secure the ends and with separate inserts - "tongues" for pressing. Material: ductile cast iron galvanized. With proper installation, appropriately selected hose and fitting, working pressure up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRust and solid contaminant removal gun for hard-to-reach areas using mineral abrasive material. Grain diameter 0.1 ÷ 0.8 mm depending on the material being blasted. Version with a plastic tank with a capacity of 0.7 l. Nozzle diameter: 4 mm. Maximum pressure: 8 bar. Operating pressure: 4 ÷ 7 bar. Operating temperature: from 0°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum compressed air gun designed for removing all types of contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made using aluminum casting. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, the gun is available with a EUROSTANDARD 7.2 plug or a hose coupling with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (casting). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal lightweight water gun with adjustable outlet nozzle, smooth flow regulation, and trigger lock. Available with connection: NiTO 1/2" plug, NiTO 3/4" plug, GZ 1/2" or CLICK 1/2" plug. Housing: high-strength plastic. Nozzle: chrome-plated brass. Working pressure: 6 bar at +40°C, 4 bar at +60°C. Flow rate: 8.5 ÷ 10.5 l/min (3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilling gun type 222 made of glass fiber reinforced polypropylene intended for diesel fuel. Standardly equipped with a rotating connection GW 1" BSP, which prevents hose twisting. It does not have an automatic fuel shut-off system, therefore it is not suitable for use with dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: glass fiber reinforced polypropylene. Color: black. Flow rate: 60 ÷ 80 l/min. Rotating connection: yes.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsP16 HP press with manual hydraulic pump drive, intended for repair workshops, technical vehicles, service points, etc. Compact design and low weight allow for repairs at the site of failure. Electric (battery-operated) indicator for achieving the crimping diameter. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimping diameter range from 10 to 38 mm, 8 sets of standard jaws from FP-16-10 to FP-16-31 should be ordered, with the largest crimping diameter of up to 45 mm achieved using the main jaws.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, flexible, reinforced high-pressure hose with four layers of steel wire, used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: polyamide. Reinforcement: two tight and two loose layers of steel wire. Outer layer: black polyurethane. Material of fittings and sleeves: carbon steel, galvanized. Working pressure: up to 1040 bar. Operating temperature: from -30°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection in the form of a sleeve. Strong, chemically resistant (except for hydrofluoric acid, phosphoric acid, and strong bases). Completely flame resistant. High content of pure silica (over 96%) ensures excellent temperature resistance, flexibility, and minimal shrinkage. It has electroinsulating properties. Does not emit smoke or fumes. Wall thickness is approximately 1.65 mm. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting - tee for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type crimping sleeve used for clamping hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick coupling ends. Low-pressure hoses up to approximately 30 bar (depending on diameter) made from various materials can be used with crimping sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with a steel braid (e.g., type PZ hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforcing sleeve type B12 recommended for connecting plastic hoses to couplings with a locking ring of series B. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality general-purpose worm clamp designed for quick and easy fastening of industrial hoses, entirely made of AISI 316 stainless steel, recommended for use in the food, chemical, marine industries, etc. Manufactured in accordance with the requirements of DIN 3017 standard and RoHS directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm features greater strength and a higher permissible tightening torque than the ASFA-L clamp (9 mm), ensuring a stronger grip and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-extruded thread in the band, smooth on the inside, provide a reliable multiple clamping of the clamp without damaging the hose surface. Material: AISI 316 stainless steel (W4).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for IBC connection for pallet containers with trapezoidal thread (o-ring for S60x6, above flat seal). Material: EPDM, LDPE, PTFE, viton or Santopren.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal of the ANFOR lever coupling socket. Material: NR/SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose used as a protective cover for cooling electrical hoses in the metallurgical industry. Inner layer resistant to hot cooling water, process water, corrosion inhibitors, and water with antifreeze fluids. Both inner and outer layers are non-conductive. Electrical resistance R > 1010 Ω/m, breakdown resistance > 6 kV/mm. Outer layer resistant to aging, ozone, and radiant heat from electric arc furnaces, self-extinguishing (compliant with ASTM C-542 standard). Bend radius specified for pressure of 1 bar. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black CR rubber. Working pressure: 10 bar. Burst pressure: 30 bar. Operating temperature: from -40°C to +90°C (temporarily +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with enhanced abrasion resistance for use with cold and hot water pressure washing equipment. Resistant to detergents in aqueous solutions used, for example, in pressure washers, oils, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: single or double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type of hose. Operating temperature: from -40°C to +120°C (temporarily up to +155°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane-butane and natural gas. Meets the requirements of ISO 3821 standard. Inner layer: black NBR rubber. Reinforcement: two textile braids. Outer layer: orange EPDM/SBR rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality large-diameter refrigerant hose designed for automotive (especially trucks and buses) and industrial refrigeration and air conditioning systems operating on R 134a and R404a refrigerants, as well as mineral and synthetic oils PAG and POE. The outer layer is resistant to oil, abrasion, high temperatures, and weather conditions. Standards: SAE J2064 type B (dimensions SAE 100R5). Installation: use special screwed or clamped fittings. Inner layer: black IIR rubber. Reinforcement: steel braid. Outer layer: black CSM rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -40°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose used for washing with cold and hot water and for the transfer of light chemicals, detergents, and disinfectants. Suitable for use in the food industry. Compliant with European requirements for food substances according to regulation 1935/2004 EC and directive 2007/19/EC (simulated fluids A, B, C). Hydraulic type fittings (TI-Z...) should be used, properly secured with sleeves, or fittings attached using two clamps, which should be tightened after the first use at higher temperatures. Fittings and sleeves should be secured after preheating the hose in water at +60°C for 30 seconds. Inner layer: white, smooth PVC. Reinforcement: synthetic cord. Outer layer: blue, smooth PVC. Working pressure: 33 bar. Operating temperature: from -15°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose designed for the transport of air, dust, powders, wood shavings, fine chips, lightweight bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial sectors. Antistatic and flame-retardant, it ensures high work safety. Flexible and elastic, even at low temperatures. Less compressible than the SMARTFLEX® 0.4 hose, but smoother on the inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal direction of medium flow is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ω, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with the recommendations of BGI 739-2. Flame-retardant – according to DIN 4102 class B1. Hose material: transparent polyester-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral made of steel wire. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, flexible hose in cream color, specifically designed for the pharmaceutical industry, biotechnology, and laboratories. It has high fatigue resistance, exceptionally long service life in peristaltic pumps, and good resistance to spallation (the chipping of micro-particles from the hose material due to rotor pressure). It also features very low permeability to gaseous media, low absorption levels of transmitted products, and good resistance to acids, bases, and oxidation. Ideal for use in diagnostic processes, sampling and culturing of in vitro cell cultures, vaccine production, bioreactors, sterile filling lines, fermentation processes, extraction, and purification. The opaque wall of the hose protects sensitive products from UV radiation. The hose complies with USP Class VI requirements and is completely non-cytotoxic, non-hemolytic, and non-pyrogenic. Compliant with ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Meets NSF-51 requirements for food contact. Multiple sterilization by steam in autoclaves is possible (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (gamma Cobalt 60 up to 5 Mrad). Flame resistant (UL 94-HB). Full hose roll length is 7.5 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: thermoplastic elastomer (TPE). Operating temperature: from -51°C to +135°C. Brittleness temperature: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International with strict standards maintained. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose, very flexible, resistant to aging, ozone, weather conditions, and abrasion. Designed for air, water, and light chemicals: non-oxidizing, diluted acids (e.g., hydrochloric and sulfuric), diluted bases, salt solutions, alcohols, acetone, ketones, glycol-based coolants. Not suitable for oils, fuels, aromatic hydrocarbons. Can be used for various water-soluble paints and those based on ketones and esters. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. Inner and outer layer antistatic R<106 Ω according to EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) spiral textile braid. Outer layer: black EPDM rubber. Operating temperature: from -40°C to +120°C (temporarily up to +140°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for vehicle brake systems. Manufactured according to SAE J1401 standard. Designed for conveying pressures in hydraulics, resistant to high temperatures and aggressive chemical substances, brake fluid DOT3 and DOT4. The outer surface is also resistant to the aforementioned substances. The hose can be used in brake systems equipped with ABS - reduces pulsation effect. Inner layer: PTFE. Reinforcement: single steel braid. Working pressure: 210 bar. Operating temperature: from -40°C to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility (type COMPACT). Confirmed hose lifespan of 400,000 impulse cycles. Standards: EN 857 2SC, SAE 100R16, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Resistant to water and oil-laden air. Hose with enhanced resistance, according to DIN 73378 standard (P-plasticized, H-thermally stable, L-UV resistant). Standards and requirements: compliant with DIN 74324 standards for pneumatic braking systems of road vehicles and DIN 73378 for polyamide hoses used in road vehicles. In case of operation at elevated temperatures, pressure drop must be considered along with temperature. Available in colors: natural, black, blue, green, red, and yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 12 bar to 44 bar (depending on hose diameter and wall thickness). Working pressure dependent on temperature. Operating temperature: from -40°C to +80°C (for water-based media +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral hose intended for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded ends. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-IN hose for lubricating products with calibrated outer diameter intended for connection with PUSH-IN plug couplings. For operating temperatures above +20°C, the maximum working pressure of the hose should be reduced according to the correction factor value: (operating temperature/correction factor) +20°C/1.00; +30°C/0.83; +40°C/0.72; +50°C/0.64; +60°C/0.58; +70°C/0.52; +80°C/0.47. Material: polyamide 66. Operating temperature: from 0°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, semi-transparent smooth-walled PTFE hose with excellent chemical resistance. Designed for low-pressure installations of chemicals, paints, fuels, oils, greases, air, gases, water, steam, and water-based fluids – in all types of industry. As it is chemically inert and does not contain components that could leach into the internal medium, it can be used for food substances. Compliant with FDA 21 CFR 177.1550, EU 10/2011, EC 1935/2004, and Italian D.M. 174 06/04/2004. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. It can also be used as mechanical guidance for hoses or rods due to the low friction coefficient and self-lubricating properties of Teflon. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 3:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Hose material: PTFE (Teflon). Operating temperature: from -60°C to +260°C. Working pressure: from 3 bar to 56 bar - depending on the diameter and wall thickness of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose made of PVC for general purposes and food products. Used for compressed air, water, water-based coolants, light chemicals, and liquid and semi-liquid food products. The smooth inner wall reduces flow losses and ensures ease of cleaning. In the food industry, it can be used for the transfer of hydrated, acidic foods, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +40°C and 0.5 h). Not recommended for milk and its derivatives, as well as food substances containing fats and oils. The RAGNO CR hose complies with European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure for a temperature of 20°C: from 8 bar to 20 bar - depending on the hose diameter. The working pressure value decreases with increasing temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick coupling plug with internal thread and valve designed for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (connected coupling). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (o-ring NBR). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type U throttling and check valve (threaded connection with an O-ring at the inlet and a plug connection at the outlet, to the actuator) regulates the flow of air passing in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality two-way ball valve with internal BSP threads and mounting holes in the body, designed for high-pressure hydraulic installations. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -40°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. Mainly used in harsh conditions for sampling, flow shut-off, and testing stations. Standard with a V-type stem (valve operation close - open). Each valve is factory tested. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing seal: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: BSP female thread.
