Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation water, water sea, cooling also of agents for treatment, water drinking, acids and bases o small concentrations, solutions salts, esters and ketones. Nie are suitable for oils mineral, water cooling of agents anti-corrosion containing oil, oily air. marked na bellows single red stripe. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +100°C (momentarily +120°C depending on medium).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon cord. Outer layer: rubber CR. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for use in installations, in which medium constitutes hot and cold water, water with addition agents treating, industrial, sea, glycol, weak acids, principles, esters and ketones. Nie serves for conveying media containing oil. BV certificate (Bureau Veritas). Inner layer: rubber EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsZe regard na above-average resistance na abrasion compensators te used are for transferring media such jak: suspensions, sediments, emulsions, water with all kinds additives containing element fixed, acting abrasively. Nie are intended for conveying media containing oils and fats and products petroleum-based. marked na bellows single blue point. Inner layer: rubber BR/NR. Reinforcement: braid polyester. Outer layer: rubber BR/NR. Flanges: galvanized carbon steel. Operating temperature: from -50°C to +70°C (momentarily +90°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for use in installations hot water, water cooling, hot air. Nie is suitable for oils mineral, water cooling of agents anti-corrosion containing oil, oily air. Marked on the bellows with a double red stripe. Inner layer: rubber EPDM. Reinforcement: cord polymer. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +130°C (momentarily +150°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based o content compounds aromatic for 50%, oily air, gaz natural (nie LPG), water oily, water cooling of agents anti-corrosion. marked na bellows single yellow stripe. Inner layer: rubber NBR (NBR). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation cold and hot water (nie water drinking), water sea, cooling also of agents for treatment, sewage municipal, water oily, compressed air (nie hot). Nie is suitable for oil heating, diesel, gasolines and other compounds carbon and acids and bases. Marked na bellows letters CR without stripe. Inner layer: rubber CR (chloroprene). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -25°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for use in installations, in which medium constitutes hot and cold water, water cooling with addition agents for treatment water, water drinking, water industrial, solutions chlorine, glycol, acids, principles, milk lime, esters and ketones, water sea. Nie should have contact with substances oily. It has a PZH certificate for drinking water. Inner layer: rubber EPDM. Reinforcement: nylon braid. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: up to +100°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBellows rubber for compensator intended for use in installations, in which medium constitutes hot and cold water, water with addition agents treating, industrial, sea, glycol, weak acids, principles, esters and ketones. Nie serves for conveying media containing oil. BV certificate (Bureau Veritas). Inner layer: rubber EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation with media food, also containing oils and fats. Nie is suitable for water drinking. Marked na bellows white stripe. Layer inner: white NBR rubber (NBR). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products chemical, petroleum-based o content compounds aromatic for 50%, acids, principles, oily air (up to +90°C), gaz natural (nie LPG), water oily, water cooling of agents anti-corrosion. marked na bellows single green stripe. Inner layer: rubber CSM (hypalon). Reinforcement: nylon cord. Outer layer: rubber CSM (hypalon). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +100°C (momentarily +110°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for conveying LPG (Liquid Petroleum Gas) in accordance with the EN 589 standard in tankers, fuel installations, fuel stations. It has a Germanischer Lloyd certificate. Also available with ASA 300 flanges. Marked on the bellows with a single orange stripe. Layer inner: conductive NBR rubber. Reinforcement: nylon cord. Layer outer: conductive rubber CR. Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for absorbing vibration and vibration and movements linear and angled in installations water. Nie serves for conveying media containing oil. It has a PZH certificate for drinking water. Inner layer: rubber EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. the connection: BSP female, cast iron, galvanized. Operating temperature: from -10°C to +100°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compensator intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon braid. Outer layer: rubber NBR. Flanges: galvanized carbon steel. Operating temperature: up to +80°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation sanitary, cold and hot water, water pool, sea, drinking. Nie is suitable for oils mineral, water cooling of agents anti-corrosion containing oil, oily air and for installation where fixed pressure working exceeds 10 bar. Marked na bellows single red point. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (momentarily +120°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rubber bellows for a compensator, intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon cord. Outer layer: rubber CR. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based, gasoline, oil drive, oil heating, fuel aviation JET A1, kerosene. marked na bellows single yellow stripe and white letters LT. Inner layer: rubber NBR (NBR). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based and fuels o content compounds aromatic for 50%, water cooling with oil agents anti-corrosion, oil lubricating and hydraulic, water sea. Marked na bellows yellow-blue-yellow stripe. Inner layer: rubber HNBR (NBR). Reinforcement: cord steel. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -35°C to +100°C (momentarily +120°C depending on medium).
