Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for the hose), with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant; possible sealing on a 60° cone (AGR-K). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 304 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic screw end, type S, BANJO for a screw with metric thread (RNM). Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z – with a regular hydraulic "tail" for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end (type P - with a special "tail" for thermoplastic hose) with external metric thread, sealing on a 24° cone (CEL), lightweight series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hoses), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with external metric thread, sealing on a 24° cone (CES), heavy series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with external metric thread, sealing on a 60° cone (CES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external metric thread, sealing on a 60° cone (CES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal UNF thread, sealing on a 74° cone (DKJ). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal UNF thread, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, face seal (DKL-FL), 90° angle, light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), 45° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an o-ring on a 24° cone (DKOS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve, suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, 60° sealing cone (DKR), 45° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F), 45° angle. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKS), angled 45°, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external tapered NPT thread, rotary, thread sealing (AGN), possible sealing on a 60° cone. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, flat sealing (ORFS), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal UNF thread, sealing on a 74° cone (DKJ). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with external BSPT thread, sealing cone 60° / on the thread (AGR-K). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal NPT thread, fixed, sealing on the thread using Teflon tape or liquid sealant. Designed for crimping in UHP thermoplastic hoses using a crimp sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° NON SKIVE SAE 6000 collar end (SFS 45), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanization.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° Non-Skive Flare Fitting SAE 3000 (SFL 90), lightweight series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° NON SKIVE SUPERCAT flange end (SFC 90), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight non-skive flange end SAE 3000 (SFL), lightweight series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight non-skive collar end SUPER CAT (SFC), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), 45° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
