Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external UNF thread, sealing on a 74° cone (AGJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hoses), BANJO for a screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsZF2 clamping sleeve for rubber hydraulic hoses type 2ST (R2A) or 4SP. Installation - external machining. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 [mm] - outer diameter. Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z – with a regular hydraulic "tail" for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, O-ring seal on a 24° cone (DKOL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBP7 clamp sleeve for thermoplastic hoses type R7 (SAE100R7). Installation - no machining required. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKS), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external UNF thread, face seal with O-ring (ORFS). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBPMT2 clamping sleeve for thermoplastic hoses type MT2. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), angled 45°, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 screw connection, type GE-BE: 24° DIN 2353 socket with external metric thread and external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 screw connection, type GE-BE: 24° DIN 2353 socket with external metric thread and external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: LL (very light series), L (light series), S (heavy series). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angled fitting DIN 2353, type EVWO: 24° DIN 2353 socket with external thread and internal metric thread with O-ring. Available as: L (light series), S (heavy series). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric threaded nut for DIN 2353 connectors, type M. Available as: LL (very light series), L (light series), S (heavy series). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angular fitting DIN 2353, type EVWO: 24° DIN 2353 socket with external thread and internal metric thread with O-ring. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric threaded nut for DIN 2353 connectors, type M. Available as: LL (very light series), L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking ring for 24° socket DIN 2353 connections. Available as: LL (very light series) and L/S (light/heavy series), without designation in the index. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-in DIN 2353 fitting, type GE-BE: 24° DIN 2353 socket with external metric thread and external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: LL (very light series), L (light series), S (heavy series). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 angled fitting, type W: 24° DIN 2353 socket with external metric thread on both sides. Available as: LL (very light series), L (light series), S (heavy series). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angular fitting DIN 2353, type EVW: socket 24° DIN 2353 with external thread and internal metric thread (sealing with a cutting ring). Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 straight partition fitting, type SV with counter nut: socket 24° DIN 2353 on both sides with external metric thread. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking ring for 24° socket DIN 2353 couplings. Available as: LL (very light series) and L/S (light/heavy series), without designation in the index. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 straight adjustable fitting, type SNV: socket 24° DIN 2353 on both sides with an o-ring and internal metric thread. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 plug, type VSTI-BE for hex key: external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 angular fitting, type W: 24° DIN 2353 socket with external metric thread on both sides. Available as: LL (very light series), L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 adjustable angular screw connection BANJO, type WH-BE: 24° DIN 2353 socket with external metric thread and external BSP thread (sealing DIN 3852 type E – elastomer seal with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 straight reducing fitting, type GR: 24° DIN 2353 socket with external metric thread on both sides. Available as: LL (very light series), L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 straight fitting, type G: socket 24° DIN 2353, both sides with external metric thread. Available as: LL (very light series), L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 tee fitting, type T: 24° DIN 2353 socket with external metric threads. Available as: L (light series), S (heavy series). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 straight reducing fitting, type KORO-L lightweight series: 24° DIN 2353 socket with O-ring, with internal metric thread and external metric thread. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 straight fitting, type G: socket 24° DIN 2353, with external metric thread on both sides. Available as: LL (very light series), L (light series), S (heavy series). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 T-shaped connector, type T: 24° DIN 2353 socket with external metric threads. Available as: LL (very light series), L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 angular flange fitting, type WSV with counter nut: socket 24° DIN 2353, both sides with external metric thread. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 adjustable screw fitting, type EVGEO-BE: 24° DIN 2353 socket with O-ring, internal metric thread, and external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 adjustable tee fitting, type EVLO asymmetrical: 24° DIN 2353 socket with external thread and internal metric thread with O-ring. Available as: L (light series), S (heavy series). Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 screw-in angular adjustable BANJO, type WH-BE: 24° DIN 2353 socket with external metric thread and external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angled fitting DIN 2353, type EVWO: 24° DIN 2353 socket with external thread and internal metric thread with O-ring. Available as: L (light series), S (heavy series). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angled screw connection DIN 2353, type WE-BG: 24° DIN 2353 socket with external metric thread and external BSP thread (sealing ISO-1179 type G - O-ring with retaining ring). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 2353 screw-in adjustable connector, type EVGEO-BE: 24° DIN 2353 socket with O-ring, featuring internal metric thread and external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section). Safety factor 4:1. Available as: L (light series), S (heavy series). Material: carbon steel, galvanized.
