Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforced polyester silicone hose is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Standard length: 1000 mm (also available in a 2000 mm section). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approximately 65° Shore (A), density approximately 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 0.86 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose connector RADIATOR intended for engine cooling systems in vehicles and automotive-type engines (for water, coolant fluids based on ethylene glycol). Meets the requirements of standard SAE J20 R4 Class D-1. Available as a simple connector with a length of 1000 mm. Working pressure: from 0.6 bar to 3.7 bar, depending on the diameter of the connector. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. Connector material: black EPDM rubber. Reinforcement: textile braid.
Select options This product has multiple variants. The options may be chosen on the product page / Details90° ELBOW RADIATOR designed for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Meets the requirements of standard SAE J20 R4 Class D-1. Available with arm lengths of 200, 250, and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter of the elbow. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. coupling material: black EPDM rubber. Reinforcement: textile braid.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 90° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arm lengths of 152, 250 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1.83 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSUPER FLEX hose reinforced with polyester and steel spiral is designed for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with fluorocarbon rubber is recommended. Standard length: 1000 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers + steel spiral (wire thickness 1.2 mm). Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 180° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 45° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arm lengths of 152, 250 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1.5 bar to 8.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone reducer connector reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm3. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 1 bar to 7.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose reinforced with meta-aramid is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version made of fluorocarbon rubber is recommended. Standard length: 1000 mm (also available in lengths of 2000 mm and 3000 mm). Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Outer layer color: blue. Material: silicone rubber. Reinforcement: meta-aramid layers. Working pressure: from 1 bar to 8.75 bar (depending on hose diameter). Operating temperature: from -50°C to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone anti-vibration connector with one notch reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with fluorocarbon rubber is recommended. Pressure safety factor: 3:1. Complies with SAE J2006 R3 standard. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone reducing elbow 90° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester inserts. Working pressure: from 1 bar to 7.33 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° ELBOW RADIATOR intended for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Meets the requirements of standard SAE J20 R4 Class D-1. Available with arm lengths of 200, 250, and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the elbow diameter. Operating temperature: from -40°C to +125°C. Safety factor (burst pressure / maximum working pressure) 3:1. coupling material: black EPDM rubber. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone elbow 135° reinforced with polyester is intended for cooling systems and heating systems in vehicles (water, coolant fluids, clean air or air with a small amount of oil mist). For oils, fuels, and oil mist, the version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. Color of the outer layer: blue. Material: silicone rubber. Reinforcement: polyester spacers. Working pressure: from 2 bar to 8.12 bar (depending on hose diameter). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber molded hose without reinforcement, flexible and stretchable (in diameter) with a special corrugated shape, ensuring resistance to kinking when bending and the ability to cut into sections of required length. Produced in lengths of 1 m, which can be cut and easily shaped in installation. Available in a basic version made of EPDM rubber, for water, cooling fluids, resistant to diluted acids and bases, at elevated temperature and ozone. Operating temperature range from -40°C to +135°C (TUBANO) and in a version with increased external oil resistance, made of a different synthetic rubber. Operating temperature range from -30°C to +120°C (TUBANO OIL). Hose material: molded EPDM rubber. Working pressure: 1.5 bar.
