Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose SUPERFLEX RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). version of reinforcement textile and a spiral steel securing against collapse bent hose. has „soft” fitting, free of spiral steel, enabling easy and tight installing na spigots using straps. serrated externally The design hose bends easily, replacing in many cases original formed connector and ensuring unobstructed solid flow even at strong bending. The design a connector corresponds standard SAE J20 R5 and is resistant na temperature and na fluids cooling used in automotive. no data regarding pressure working. Operating temperature: from -40°C to +125°C. Material a connector: black rubber EPDM. Reinforcement: textile braid + A spiral steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. length standard: 1000 mm (Available also in section 2000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 0.86 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. Available in the molds simple a connector o length 1000 mm. pressure working: od 0.6 bar for 3.7 bar, depending on diameter a connector. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. available with arms o length 200, 250 and 300 mm. pressure working: od 0.6 bar for 4.1 bar, depending on diameter elbow. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.83 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 45° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.5 bar for 8.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. standard length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced meta-aramid intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm (Available also in section 2000 mm and 3000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. color layer outer: blue. Material: rubber silicone. Reinforcement: plies meta-aramid. pressure working: od 1 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector anti-vibration silicone with one corrugation reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. Pressure safety factor: 3:1. meets standard SAE J2006 R3. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow reducing silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. available with arms o length 200, 250 and 300 mm. pressure working: od 0.6 bar for 4.1 bar, depending on diameter elbow. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 135° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber formed hose without reinforcement, flexible and stretchable (na diameter) o special serrated shape, ensuring resistance na kinking at bending and possibility cutting na sections o required length. manufactured in sections o length 1 m, which can cut and easily molds in installation. Available in version basic, made with rubber EPDM, for water, liquids cooling, resistant na diluted acids and principles, na elevated temperature and ozone. Range temperatures use from -40°C to +135°C (TUBANO) and in version o elevated resistance outer na oil, made with other rubber synthetic. Range temperatures use from -30°C to +120°C (TUBANO OIL). Material hose: formed rubber EPDM. pressure working: 1.5 bar.
