Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for a pressure gauge with a female thread and an end intended for microhoses, complete with a ferrule. The connection is available in two variants: with a swivel nut (with a metric and BSPT thread, NBR O-ring seal) and with a fixed nut (with an NPTF and BSPT thread). Material: steel with zinc-nickel coating. Working pressure: 500 bar or 630 bar – depending on hose size. Operating temperature: from -30°C to +120°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric connection ISO 12151-2, 24° cone, with an O-ring and a nut, 90° angled, with a measuring hose end. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Material: steel with zinc-nickel coating. Working pressure: from 250 bar to 630 bar – depending on size. Sealing: NBR O-ring. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetric connection ISO 12151-2, 24° cone, with an O-ring and a nut, straight, with a measuring hose end. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Material: steel with zinc-nickel coating. Working pressure: from 250 bar to 630 bar – depending on size. Sealing: NBR O-ring. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement connection with a 5/8" BSF female thread (standard typical for JCB machines) and an end intended for 2x5 mm microhoses. Also included is a plug with a male thread on a steel lanyard. Material: carbon steel, galvanized. Working pressure: 420 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement connection with an M16x2 (ISO 1517-2), M16x1.5 or S12.65x1.5 female thread and a measuring hose end, supplied complete with a ferrule. Material: steel with zinc-nickel coating or AISI 316 steel. Working pressure: 500 bar or 630 bar – depending on size. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connection with a metric, BSP, JIC or ORFS female thread, with a swivel nut and a measuring hose end, supplied complete with a ferrule. Material: steel with zinc-nickel coating or AISI 316 steel. Working pressure: from 400 bar to 630 bar – depending on size. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled tube connection, for connection using a ring and a DIN 2353 nut, with an end intended for a measuring hose. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Working pressure depends on the connection mounted on the tube and the working pressure of the hose. Material: steel with zinc-nickel coating.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connection, for connection using a ring and a DIN 2353 nut, with an end intended for a measuring hose. The connection is available as L (light series) and S (heavy series), while the end is intended for DN2 or DN4 hoses and supplied complete with a ferrule. Working pressure depends on the connection mounted on the tube and the working pressure of the hose. Material: steel with zinc-nickel coating.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connection with a BSP, NPTF male thread and a measuring hose end, supplied complete with a ferrule. Available in three variants: with a BSP male thread (60° cone), with a BSP male thread (flat sealing) or with an NPTF male thread (tapered). Material: steel with zinc-nickel coating. Working pressure: 400 bar and 630 bar – depending on size. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO bolt DIN 7643, size M8, M10 and 1/8" BSP. Material: carbon steel, galvanized; steel with zinc-nickel coating. Working pressure: 200 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule intended for crimping thermoplastic microhoses DN2 and DN4, used in hydraulic measurement and control systems. Material: steel with zinc-nickel coating.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO straight coupling DIN 7642 with an end intended for microhoses, complete with a ferrule. Material: steel with zinc-nickel coating. Working pressure: 200 bar. Operating temperature: from -30°C to +120°C.
