Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSE silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 28 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP button with VRM-065 R lock for VME valve. Color: red. VME1-000 Adapter required for installation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil 22 mm for valves of series 70 with sizes 1/8" and 1/4", plunger O8. Insulation class: F155. Voltage tolerance: -10% to +15%. Protection degree: IP65 DIN 40050 with connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSFE silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 90° (to avoid direct flow) from the axis of the silencer, averages 30 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug for coils 22 mm, hose diameter: PG9. Color: black or transparent.
- Select options This product has multiple variants. The options may be chosen on the product page / Details22 mm coil for PIV.I valves, shaft O8. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSC silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 35 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: up to 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details2-position adapter VME1-000 intended for VME mini valves or valves mounted on the control panel from the 70 series.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMuffler with MWSVE throttle and external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the muffler, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the muffler, averages 25 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Spring material: stainless steel. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details30 mm coil for PIV.B valves. Insulation class: F180. Voltage tolerance: -10% to +15%. Protection degree: IP65 EN60529 with coupling.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDynamic silencer MWSPL with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 30 dB depending on the size. Material: black acetal resin, acoustic insulation. Operating temperature: from -10°C to +60°C. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBistable 3-position switch VRM-313 N with short lever for VME valve. VME1-000 adapter required for installation. Color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBistable 2-position switch VRM-300 N with short lever for VME valve. VME1-000 adapter is required for installation. Color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSVL silencer with throttling and external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 25 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug 30 mm standard for PIV valve, for panel mounting. Cable diameter: PG11. Color: black or transparent.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSCQ silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 35 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: up to 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil 30 mm O8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Connector shape: DIN 43650 shape A. Continuous duty cycle: 100% ED.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat monostable button VRM-010 RN for VME valve. VME1-000 adapter is required for installation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonostable mushroom button VRM-050 R for valve VME. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / Details22 mm coil UL and CSA for PIV.I valves, shaft O8. Insulation class: F155. Voltage tolerance: -10% to +15%. Protection degree: IP65 EN60529 with connector.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDischarge silencer MWDSE with external thread used in compressed air systems to reduce noise intensity. Material: nickel-plated brass. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSTT silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 32 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRepair kit designed for VSR series quick release valve. The kit includes a flat gasket made of NBR rubber and a lip seal made of polyurethane. Available in three sizes: 1/8", 1/4", and 1/2".
- Select options This product has multiple variants. The options may be chosen on the product page / Details15 mm plug shape C, DIN 43650, for MACH 16 MSV valve, electric control. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDrain valve MWDSN with external and internal thread used in compressed air systems to reduce noise levels. Material: nickel-plated brass. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug 15 mm. Color: black or transparent.
