Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / Details"Y" plug tee, adjustable with external thread, type R23/M, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe bracket is used to mount the proximity sensor on cylindrical actuators. Sensor brackets DXF: with indices W09500001... - intended for actuators with an aluminum sleeve, with indices W09500005... - intended for actuators with a stainless steel sleeve. Material: stainless steel, plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a 90° lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position or 5/3 - five-way, three-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRepair kit designed for VSR series quick release valve. The kit includes a flat gasket made of NBR rubber and a lip seal made of polyurethane. Available in three sizes: 1/8", 1/4", and 1/2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped plug connector, adjustable with external thread, type R35, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCETOP bracket for mounting with a swivel flange. Included: 4 screws with washers. Material: cast aluminum (flange), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / Details15 mm plug shape C, DIN 43650, for MACH 16 MSV valve, electric control. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDrain valve MWDSN with external and internal thread used in compressed air systems to reduce noise levels. Material: nickel-plated brass. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWobble flange with a single ear for mounting on the rear part of the actuator cover, without a pin. Allows for the movement of the pneumatic actuator during operation. Included: 4 screws. Material: cast aluminum (flange), steel + bronze + PTFE (bushing), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini mushroom valve, mechanically controlled, commonly used for controlling actuator operation. It can be mounted in any position. A small force is required to actuate the valve. Function 3/2 NO and NC - three flow paths, two positions. Connection: GW M5, plug-in connection Ø4 and Ø6 (axial or side). Actuation: push rod, panel-mounted push rod, lever with roller, lever with single-acting roller. Material: valve body - aluminum, push rod - nickel-plated brass, sealing - NBR, springs - stainless steel. Nominal flow: 60 l/min (at input pressure 6 bar Δp = 1 bar). Actuation force (push rod at 6 bar): 8 N. Operating pressure: from 0.5 to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling with a spigot and external thread, type R6, designed for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket (angle bracket) intended for ISO 15552 actuator series STD, series 3, "two flat", with a diameter from 32 mm to 125 mm, model A. Included: 2 screws. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction plug with one side ending in a tube (fitting), and the other side ending in a plug coupling, series S, type PGJM. An economical solution for connecting flexible pneumatic hoses with a metric calibrated outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF NTC series COMPACT "N" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWobble flange with ball joint for mounting on the rear part of the actuator cover. Included: 4 screws with washers. Material: cast aluminum (flange), steel (joint), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for series R connector, type R9. Material: plastic. Working pressure: 12 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Distributor sizes: 1/8", 1/4", 3/8", 1/2". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of interchangeable seals for ISO 15552 actuator Ø 160 - 200. Material: NBR. Diameter: Ø 160, Ø 200.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-U with a check valve and internal thread, primarily used as a safety valve. When installed on the actuator's supply connections, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° adjustable angled plug connector with internal thread, type R34/F, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of interchangeable seals for compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 80, 100.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-type reducing tee connector with plug connections for hoses with metric diameter, series S, type PYM. An economical solution for connecting flexible pneumatic hoses with calibrated metric outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with a 90° lever, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Size: 1/8", 1/4" or 1/2". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-output distribution rail with 1/4" outlets for use in pneumatic systems, allowing for the distribution of compressed air under pressure to several other branches. It has additional holes for securing it in the desired installation location. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProximity sensor mounting bracket for ISO 15552 actuators, in version with cylindrical sleeve. Material: aluminum. Diameter: 160 ÷ 200.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF OMC series COMPACT "O" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with external tapered thread, type R1C, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of interchangeable seals for compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 32 ÷ 63.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectricly adjustable NAMUR valve for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - Hostaform®. Operating pressure: 2.5 ÷ 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint with three independent paths, internal BSP threads at the inlet, internal BSP threads at the outlet. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with external NPT thread, series S, type PCC. Economic solution for connecting flexible pneumatic hoses with inch calibrated outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDistribution rail with connections O 4-6-8 mm for use in pneumatic systems, allowing the distribution of compressed air under pressure to several other branches. It has additional holes for securing it in the desired location of the installation. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReplacement seal kit for compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 20, 25.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR series check valve allowing air flow in only one direction. Working pressure: 2 ÷ 10 bar. Operating temperature: from -10°C to +70°C. Body material: brass OT58. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled connector with external NPT thread, series S, type PLC. Economic solution for connecting flexible pneumatic hoses with inch calibrated outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for use on the piston rod to secure, e.g., fork/joint heads (for diameters 32 ÷ 125 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint with two independent paths, internal BSP threads at the inlet, internal BSP threads at the outlet. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary angled plug connector with external tapered thread, type R 31C, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
