Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter three-piece for high-pressure equipment washing with connection metric M22x1.5. Material: brass. pressure working: up to 280 bar. Operating temperature: up to +160°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adapter DN with BSP male threads on both sides is designed for connecting lines (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Depending on the size and manufacturer, the couplings have various shapes of wrench flats. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn automatic drum reel for hoses for cold and hot water, oil, greases and other media. The rewind spring tested for 25000 winding and unwinding cycles. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. A hose stopper included in the set. The reel is not equipped with a hose, which should be ordered separately. A swivel bracket or an additional fixed bracket for quick removal (e.g. in winter) ordered separately. Advantages: swivel connection made of AISI 304 steel, Viton sealing. Material drum: steel carbon painted powder. Sealing: Viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDistributor block, type A21, with female threads (cross). It has threaded connections for connecting pneumatic components. Distributor material: technopolymer. Connection material: brass. Working pressure: 13 bar. Operating temperature: +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 16 channel, flat-jet, terminated a thread external M12x1.25. ideal for cleaning and cooling. Z an adapter. Material: blue polyamide (nozzle), aluminum (Adapter). pressure Maximum: 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead fork for mounting na piston rod actuator. Do use in case occurrence loads nie being in axis piston rod actuator. head fork gives greater the ability mounting. thread: M4 ÷ M36x2. Material: steel carbon galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 3/4" with a female thread and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils). For the valve, an EPDM O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsZe regard na above-average resistance na abrasion compensators te used are for transferring media such jak: suspensions, sediments, emulsions, water with all kinds additives containing element fixed, acting abrasively. Nie are intended for conveying media containing oils and fats and products petroleum-based. marked na bellows single blue point. Inner layer: rubber BR/NR. Reinforcement: braid polyester. Outer layer: rubber BR/NR. Flanges: galvanized carbon steel. Operating temperature: from -50°C to +70°C (momentarily +90°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set quick coupling without valve - socket and plug with fitting for hose intended for printing installations inkjet, blood, fluids cooling, chromatography gas, itp. The connection consists in turning the two parts of the coupling relative to each other. coupling to also allows na light rotation connected hose, co prevents its twisting and accidental disconnection. Nominal quick coupling size: DN 1.2 mm. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 6.9 bar. Operating temperature: from 0°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread, type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The design allows repeated assembly without the need for tools. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone and TYGON® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 45° INTERLOCK with BSP female thread, 60° cone with an O-ring, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled tube fitting 90° type RBS, without a nut, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with head square with a BSPT male thread. Material: steel AISI 316. Working pressure 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. standard length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with a handle, type MT6, intended for a high-pressure washer. Connection: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINI single-screw clamp intended for industrial hoses of moderate diameter and relatively thin wall. Equipped with a band tongue that protects the hose from contact with the screw and ensures even circumferential pressure. The rolled edges of the clamp do not damage the hose. The clamp fits and adheres perfectly to the hose surface, providing a strong, uniform grip. The hexagon-head screw has slots allowing various tools to be used for installation. Material: all components made of AISI 304 (W4) steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut with a metric thread intended for mounting a DIN 3015 standard clamp type 100/101 and a DIN 3015 double clamp type 201 on an ABINS rail. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, very flexible, unreinforced hose, intended for pressureless (or under very low pressure) conveying water, beer, wine, alcohols, juices, drinks. The absence of phthalates in the hose material recommends it for conveying milk and dairy products and alcohols with a concentration up to 50% and a temperature up to +40°C. not recommended for oils and greasy substances food. used also for liquids in use general-industrial, for light chemicals (acids, bases), for substances solid (powders) and as A guard pipes, lines, cables etc. For the hose, the stated pressure value is the approximate value of the recommended working pressure, assumed for a typical PVC hose, at a safety factor of 5:1. Use of the hose at a specific working pressure should be preceded by a test under operating conditions. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to a few bar, depends on temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard top Intended for gun for water AKBO HEAVY DUTY. Available in color: blue, red, yellow, green, black, white. Material: EPDM ( AK-RECOVER-BL-LAT - made with silicone).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blade spare for shears JG-TS32.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA gun for foam and spraying for mounting lances and nozzles (na outlet 1/2" BSP male). It has smooth flow adjustment and a trigger lock (insulation on the trigger). Automatic flow shut-off when the trigger is released. Material: steel AISI 316. Trigger made of stainless steel. A guard made of blue EPDM rubber. Sealing: Viton. Connection (inlet): 1/2" BSP female. maximum pressure working: 24 bar. Maximum operating temperature: +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA displacement gear pump (hydraulic), TRALE, with external gearing, intended for use in the hydraulic systems of machines and equipment. Connections: flange. Direction of rotation: right. The stated maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: L-HM45 type hydraulic oil or equivalent. Fluid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (ambient).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsButton poppet monostable VRM-050 R for valve VME. color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight ORFS with UNF male thread (sealing an O-ring with washer). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnion with threads internal BSP intended for use in pipe connections of industrial installations. sealing tapered between internal element. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPTFE tape Intended for sealing connections threaded. Operating temperature: od -100°C up to +260°C. Band width: 19 mm, wall thickness: 0.2 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "Y" of couplings push-in under hose o diameter metric, series S, type PYM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice FS50 intended is for skiving outer or internal layer rubber of machinable hoses hydraulic in the scope diameter 3/16" ÷ 2". used for unit and serial production lines hydraulic. pilot-operated manually (direction revolutions) and using pedal (start skiving), which constitutes standard equipment. device powered is motor three-phase o power 0.75 kW and weight 34 kg. to the standard equipped in A handle tools together with with two knives cutting (for external skiving). depth skiving set through special mechanism using a knob. device FS50 Compatible with pins type FSE for skiving external and FSI for skiving internal (ordered separately). Do storage tools serves stand type FS-RACK (ordered separately).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket envelope-type for part female (socket) coupling CAMLOCK. Material: PTFE/Viton. Operating temperature: from -40°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat (face) gasket GD designed for sealing the connection of a parallel male thread (e.g., BSP male) with a female thread (e.g., BSP female). The gasket should be placed in the female thread socket in a way that prevents its off-center positioning and should adhere to the flat surfaces of the female thread socket and of the male-threaded connector piece. Working pressure: 25 bar. Gasket material: EPDM – approximate temperature range: from -50°C to +180°C; Novapress® – approximate temperature range: from -25°C to +250°C; PTFE – approximate temperature range: from -40°C to +250°C; polyurethane (PU) – approximate temperature range: from -40°C to +110°C; Viton – approximate temperature range: from -20°C to +200°C. Maximum operating temperature range, without accounting for the influence of the medium (chemical resistance to the substance flowing through the connection at a given temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA flat gasket for a Guillemin coupling. Material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA profile gasket for a TW (tankwagen) coupling, type GSD (for a 4" coupling, an O-ring gasket type TWO is used). Material: vamac®. Operating temperature: up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible rubber hose delivery, intended for water, paints, light chemicals, air. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic np. toluene, xylene or gasoline, as well as for oils, fuels, hydrocarbons aromatic. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer conductive (R 5 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: a polyester braid (DN6 ÷ DN25), 2 polyester braids (DN32 ÷ DN38). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, strong hose suction - delivery intended for water, sewage. externally Serrated, inside almost smooth. good resistance to external impacts and heavier conditions use. retains high flexibility in sub-zero temperatures. used in systems irrigation, water installations industrial, for emptying septic tanks etc. On special order Available also version ARIZONA EXTREME ELASTIC flexible in very low temperatures (for -40°C). Hose material: grey and green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.5 bar to 7 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R15, ISO 3862-1 R15, SAE 100 R15. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 420 bar. Operating temperature: od -40°C up to +121°C (momentarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant to temperature two-layer hose suction - delivery intended for discharge and conveying vapours, fumes and air o high temperature. flame-retardant, resistant chemical, o fairly sound resistance to hot sparks. used in the structure furnaces (steelworks and foundries metals and glass, industry ceramic and chemical), vehicles (installations discharge exhaust gases, stations testing engines etc.), use aviation and military. It is characterised by high compressibility - up to 1:6, a strong construction, and impact resistance thanks to the external spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer fabric glass, outer Layer coated silicone (grey). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +450°C (momentarily up to +500°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, flexible hose fuel o exceptionally low permeability fumes fuels through wall hose. meets American requirements EPA and CARB (permeability for 15 g/m2/24h). patented multilayer The design hose o internal layer with fluoropolymer PVDF resistant na fuels with content ethanol for 100%. resistant na swelling and hardening na result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a exceptionally low factor penetration substances aromatic secures the operator and environment. resistant na ozone and radiation UV (ANSI B175.1 D). flexibility hose facilitates its installations even in tight places and is maintained also in low temperatures, co ensures trouble-free sampling fuels in each position. transparent wall allows na monitoring flow. thanks to internal layer with PVDF hose is resistant na most substances chemical and fuels. can be submerged in fuel (nie recommended only repeated use in high temperatures external). flame-retardant (UL 94 HB). used in modern mowers, saws chain, drills combustion, trimmers for hedges, itp. machines garden. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVDF / TPE (multilayer). temperature use: from -40°C to +82°C. temperature brittleness: -90°C. Hardness: 78° Shore (A). Density: 1.27 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of carbon steel intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter "F" on the end index means version FLOPPY, not maintaining shape. Material: galvanised carbon steel. Operating temperature: up to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details
WEICON remover and degreaser CLEANER-S, spray 500 ml
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings0 złApplication: at repairs and mounting in industry and crafts; degreases and cleans all metals, glass, ceramics and almost all plastics; dissolves also plastic thermoplastic, such as: PCW, plexiglas, polystyrene etc., as well as ordinary coating varnished. essential for preparation surface against use plastic metals, silicones, acrylics, sealant, coating anti-corrosion and all adhesives. quickly evaporates not leaving traces. Packaging - spray 500 ml. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 232 screw-together quick-coupling plug with an NPT female thread and with a valve intended for hydraulic installations at very high pressures, with large mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. It can be connected / disconnected when residual pressure is present in the system. Carbon steel caps should be ordered separately. Material: carbon steel, galvanized. Sealing: NBR. Flow: 1/4" - 16.4 l/min, 3/8" - 21.3 l/min (Δp = 4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1490 bar (plug disconnected), 3/8" - 1500 bar (plug disconnected). Operating temperature: from -25°C to +100°C.
