Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off through-flow with a female BSP thread serves for closing flow the medium in installation. intended is for installation aircraft, possible is also its use with non-flammable and non-toxic gases (nitrogen, dioxide carbon, hel, argon, etc.). shut-off valve shut-off takes place through hand turning a knob causing displacement the ball, until for jej complete seal. direction flow Marked is an arrow on body valve. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material the ball: steel stainless AISI 304. sealing stem: NBR. Working pressure: from 25 bar to 40 bar, depending on the diameter internal DN. Operating temperature: od -10°C up to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve reducing REG type piston, is characterized resistance on heavy conditions use, intended for series NEW DEAL. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2", 3/4", 1". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Pressure gauge connection: 1/8" BSP female for valve for 1/2" (above - 1/4" BSP female). Flow rate: 650 l/min - 1/4", 2500 l/min - 3/8", 1/2", 4500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC 37° with UNF male thread (37° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter (coupling nut), type A106 with BSP female thread (flat sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer series NEW DEAL type piston o high degree reliability, intended for compressed-air systems or in the immediate vicinity of actuating devices. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2". Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min - 1/4", 2500 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: brass. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting hydraulic screw-together, type S, with BSP female thread with a nut, 60° sealing cone (DKR). intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight Water gun AKBO made with polyamide PA66 glass-fiber-reinforced, valve and lever of steel stainless, A guard with rubber EPDM, seal with EPDM and Viton (FDA). has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Meets FDA requirements. used in industry food. Working pressure: 12 bar. Maximum Operating temperature: +50°C. weight: ok. 0.48 kg. Flow rate: 48 l/min (12 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / Details2-output distribution manifold for use in pneumatic systems, allowing pressurized compressed air to be split into several branches. It has additional holes for fixing it at the desired point of the installation. Inlet – BSP female threads, outlet – BSP female threads. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality aluminum compressed-air gun, intended for removing all contamination from surfaces: liquids, fine chips, filings, etc.. Flow adjustment by the degree of lever press. Made of forged aluminum, protected by anodizing, ensuring high strength, durability and corrosion resistance. can be used for water. It works perfectly even in difficult working conditions. A gun equipped is in nozzle o length 120 mm, with a thread connection external M12x1.25. Instead of the standard nozzle, other nozzles can be mounted – see accessories for EWO guns. connection: plug EUROSTANDARD 7.2. Material: aluminum (forging). diameter external nozzle (tubes): 6 mm. length nozzle: 120 mm. pressure Maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA spool directional valve, type 4/2, electrically operated with centering springs, intended for plate mounting. Used in hydraulic systems of industrial machines. Supplied as standard with O-rings and mounting bolts. The plug is fitted with an LED indicating the power supply status. Material: cast iron (body), hardened steel (spool). Sealing: NBR. Maximum working pressure: 315 bar (channels P, A, B), 160 bar (channel T). Available for the following control voltages: 12 V DC, 24 V DC, 110 V AC or 220 V AC. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing uncoated intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation and high and low temperatures. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee plug-in "L" adjustable with a thread external tapered, type R38, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClassic, high quality, rubber hose self-clamping (PUSH-ON). Do low-pressure installations hydraulic, installations pneumatic and as A universal hose industrial for air, water, oils, greases, light chemicals and liquids cleaning. Widely used in industry automotive (no use silicone in production hose). Layer outer resistant to conditions atmospheric, abrasion and oil. outer resistance to flame compliant with the standard MSHA 2G-14C/14. Non-conductive (R > 1 MΩ/inch at a voltage of 1000 V DC). Safety factor 4:1. The hose is designed to work with self-clamping PUSH-ON type ends. Available in colours: black (BK), blue (BL), green (G), grey (GY), red (R) and yellow (Y). Inner layer: black synthetic rubber Chemivic™ (NBR + vinyl). Reinforcement: a synthetic braid. Outer layer: black, blue, green, grey, red or yellow synthetic rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. Do extraction and conveying hot air, aggressive chemical vapours, exhaust gases and gases in systems ventilation and heating. has resistance to UV, ozone and conditions atmospheric. used in equipment vehicles, engines and in industry chemical. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for CSM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: externally black fabric polyester coated CSM - Hypalon. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, o high durability, A universal hose flat high quality used in industry mining, petroleum, power and agriculture. used in particular for water, sludge, sewage and fertilisers. made with resistant to hydrolysis and microbes polyurethane - polyether. Reinforcement with circumferentially woven braid polyester bonded and surrounded polyurethane in original process production extrusion thermoplastic polyurethane on hot through braid. hose o high strength on force longitudinal, o minimum elongation under pressure (up to 2%) and without tendency for coiling, screwing. thanks to durability connected easily operation (unwinding, laying, storage) Widely used in systems water (dewatering mines opencast, supply in water, drainage and discharge sewage) and not only. resistant to wide range substances chemical, microbes, fungi, hydrolysis, conditions atmospheric, UV and ozone. O sound resistance to abrasion. Available on special order in sections longer than 200 meters in diameters for 6”. in order to confirmation resistance and conditions use hose contact with Tubes International. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting. length standard roll: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 8 bar to 27 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +75°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose suction-delivery intended for conveying water, beer, wine, alcohols with a concentration up to 20% and other products food. Not recommended for milk and its dairy products, oils and greasy substances food. compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). along outer layer hose placed is cable antistatic. pressure working is 25% pressure bursting. Hose material: transparent PVC. Reinforcement: grey spiral PVC. Working pressure: from 2.4 bar to 5.6 bar, depending on the diameter hose. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 201 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: aluminum. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug (Adapter) water quick coupling NiTO CLICK 1/2" with socket system NiTO 1/2". NiTO CLICK quick couplings are water quick couplings made to the profile of very popular plastic garden quick couplings and compatible with them. Sealing by means of an O-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. Intended for water, water with cleaning agents, for use in industry, services, horticulture, agriculture, etc.. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for socket quick coupling QC4 and QC6 compliant with the standard Standard Instrumentation, with a cable. The cap is not designed for carrying pressure. It protects plugs and sockets from contamination and damage when the quick coupling is disconnected. Size: 1/4", 3/8". Material: steel AISI 316. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check series RFL type U, regulating value flow air only in one direction. is used to adjustment speed working devices actuator in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. pressure working: up to 10 bar. Operating temperature: up to +70°C. Material the body: aluminum. Material housing: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° adjustable JIC 37° with male thread and UNF female thread, nut (37° cone sealing). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - tee high-pressure type A111 with female thread 3 x BSP. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA double-sided gasket socket quick coupling with EPDM. Resistant to hot water. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: 3/4" BSP female. Working pressure: up to 25 bar. Material: brass nickel-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) series SYNTESI®, without end connections, is a device consisting of a filter and a reducing valve. It is built from the same components as the filter and reducer, so it has the same technical characteristics. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK B with a BSPT male thread made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: brass. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PUSH-ON end with a female metric thread, type YMW111, intended for a self-clamping hose designed for this type of end. Mounted onto the hose without the use of clamps or brackets. It has a special barb profile adapted to the material and dimensions of the PUSH-ON hose and the construction of its braid, causing the hose to clamp onto the barbs of the end. The end must not be used with other hoses or clamped with clamps or brackets, as this risks damaging the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specification of the PUSH-ON hose. Material: galvanised carbon steel, brass, AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. For dimension group 0 there is one bolt with a hexagonal head, for dimension groups 1 ÷ 6 there are two bolts with a hexagonal head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: rubber. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality aluminum compressed-air gun, intended for removing all contamination from surfaces: liquids, fine chips, filings, etc.. Flow adjustment by the degree of lever press. Made of forged aluminum, protected by anodizing, ensuring high strength, durability and corrosion resistance. It works perfectly even in difficult working conditions. A gun equipped is in nozzle SAFETYSTAR, replaceable, with a thread connection external M12x1.25, bent o length 110 mm of nickel-plated steel. ideal works for blowing out places hard reachable, improving simultaneously conditions use through reduction level noise for 80 dB. instead of nozzle SAFETYSTAR install can other nozzles – see accessories for guns EWO. depending on connections we distinguish A gun terminated a plug EUROSTANDARD 7.2, fitting for hose o diameter 6 mm, 9 mm and 13 mm or a thread internal 1/4". Material: aluminum (forging). pressure Maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble ball valve (Directional valve) for compressed air and water. Material the body: steel carbon galvanized. Material the ball: brass chrome-plated. sealing the ball: PTFE. Inlet with a female thread, outlet with a male thread or with cast iron claw couplings with a 42 mm lug spacing, with seal rubber (NBR) or brass. Lever with an end alloy. It has a vent. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C. Solid, maintenance-free construction. Used in compressors and construction and industrial equipment.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsActuator plunger single-acting operation with screwed-on gland, intended is for systems hydraulics power. depending on use should select buoyancy (expressed in kG/100 bar) and stroke actuator St. sets repair seals available on request. Piston diameter: Ø 25 mm ÷ Ø 60 mm. stroke working: od 100 mm for 700 mm. maximum Working pressure: up to 210 bar. medium: oil hydraulic. Material: steel carbon, cast iron (gland). coating protective: plunger chrome-plated, rest without coating. sealing: PU, POM, NBR. Operating temperature: od -30°C up to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing uncoated intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation and high and low temperatures. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together ferrule for hoses termoplastycznych type OL5 or VE5. Use only with fittings screw-together from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner smooth, antistatic, very resistant to abrasion (50±5 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer resistant to conditions atmospheric and ozone. hose intended for conveying dry strong abrasive substances: cement, sand, gravel etc. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure, very durable hose for conveying compressed air. designed for use in heavy conditions squares construction, mines etc. for supply equipment o high wear compressed air. extremely strength and durable thanks to high quality materials and double-jacket the structure – double reinforcement with circumferentially woven braid polyester high strength, completely coated and lined thermoplastic polyurethane (PU). hose o very sound resistance to abrasion, resistant to puncture, abrasion and oil. hose not extends under pressure and is resistant to loads longitudinal. flat at rest, co facilitates operation and storage. Available in the molds ready lines o length 20 or 40 m, with factory mounted fitting. use for air under high pressure should be always preceded analysis risk in case accidental disconnection or bursting hose and possible use protections. maximum pressure working hose fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. Hose material: polyurethane (PU). Reinforcement: double polyester braid. Outer layer: orange polyurethane PU). Working pressure: from 30 bar to 43.75 bar - depending on the diameter hose. Operating temperature: od -50°C up to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap QC4 and QC6 compliant with the standard Standard Instrumentation, with a cable. Size: 1/4", 3/8". The cap is not designed for carrying pressure. It protects plugs and sockets from contamination and damage when the quick coupling is disconnected. Material: steel AISI 316. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless valve hygienic of couplings TRICLOVER, intended for industry food, pharmaceutical, cosmetic, biotechnology and chemical, made in accordance of the standard sanitary 3-A (63-03 and 78-01). Roughness surface internal Ra < 0.8 µm. sealing has certificate PZH. Note: sizes od DN10 for DN20 equipped in lever with plastic. Material body: steel AISI 304. sealing: VMQ (silicone). Operating temperature: od -20°C up to +100°C (short sterilization steam water up to +120°C; cleaning weak solutions acids and bases up to +70°C). Class tightness: A acc. to DIN EN 12266-1. Working pressure: 10 bar
