Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for filling gas cylinders. Odorless inner layer compliant with FDA 21 CFR requirements, Directive 2011/10/EU, and CGA G-7.1-2004 (for breathing air). Not to be used for explosive gases, e.g., oxygen, hydrogen. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A203 with external BSP thread (60° cone seal) and internal NPT thread (thread seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic screw end, type S, with metric tube, sealing with a cutting ring (BES), angled 45°, heavy series. Designed for screwing into rubber and thermoplastic hoses using a screw sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper protective plate for mounting DIN 3015 clamp standard type 100/101. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° elbow fitting JIC 37° with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 325 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hydraulic adapter, in the shape of a 90° bent elbow, with external BSP thread (60° cone sealing) and internal BSP thread, with a swivel nut (60° cone sealing). Bent elbows are used for more efficient medium flow. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° plug with internal UNF thread (sealing on internal 37° cone). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble bottom plate for welding for the installation of DIN 3015 standard clamps type 100/101. Number of clamps: 2. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSliding valve, type 4/2, electrically controlled with centering springs, designed for panel mounting. Used in hydraulic systems of industrial machines. Standardly supplied with O-rings and mounting screws. The coupling is equipped with a power status indicator LED. Material: cast iron (body), hardened steel (slider). Sealing: NBR. Maximum operating pressure: 315 bar (ports P, A, B), 160 bar (port T). Available for the following control voltages: 12 V DC, 24 V DC, 110 V AC, or 220 V AC. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Suitable for operation in high humidity and saline air environments. Available on request in micro-perforated form (for gases and air). Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 500 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor with external BSP thread (60° cone seal) and internal BSP thread (60° cone seal), with a swivel nut. Used in hydraulic systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction in type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection block (adapter) designed for connecting hydraulic hoses with plate valves (distributors). Equipped with plate connections NG6 and threaded connections: for pump (P) - GW 1/2" BSP, for tank (T) - GW 1/2" BSP, for receiver (A and B) - GW 3/8" BSP, and pressure gauges (G) - GW 1/4" BSP. Material: steel. Maximum working pressure: 315 bar. Flow rate: 40 l/min. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type MT1 or MTH1. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive - leakage during testing according to standards less than 50 µA for voltage 246 kV/m for 5 minutes. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A117 with internal BSP thread, with a swivel nut (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with external metric thread, sealing on a 24° cone (CEL), lightweight series. Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° elbow fitting JIC 37° with external BSPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A111 with internal thread 3 x BSP (seal on the thread). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° plug with external UNF thread (sealing on the external 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with internal thread enabling the connection of quick couplings and UHP hoses. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for CO2 installation in industrial and marine fire protection systems. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -60°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic partition nipple (high pressure) without nut, type A107, with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded nipple enabling the connection of quick couplings and UHP hoses to each other, as well as connecting to UHP connection blocks. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external BSPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction adapter with external and internal threads enabling the connection of quick couplings and UHP hoses, as well as connecting to UHP connection blocks. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A205 with internal BSP thread (seal on the thread) and external NPT thread (seal on the thread). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, fuels, and water-based fluids. Available on request in micro-perforated form (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A107K with nut, featuring external BSP threads (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-way manifold block allowing the connection of multiple high-pressure hoses to a single pump, as well as the connection of a pressure gauge. Made of black zinc-coated steel. Flow diameter 5 mm (3/16"). Connections: 2 x 1/4" BSP, 1 x 1/2" BSP (NBR o-ring). Connection sealing: internal cone 120°. Working pressure: 2000 bar (maximum working pressure when using a metal-rubber seal is 1000 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R18, ISO 3949-R18. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A116N with external BSP thread (sealing ISO-1179 type G: o-ring with retaining ring) adjustable and with external BSP thread (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing nipple with external thread enabling the connection of quick couplings and UHP hoses, as well as connecting to UHP connection blocks. Working pressure: from 2000 bar to 3000 bar (depending on thread size). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting JIC 37° with external UNF thread (seal on external 37° cone). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug with external BSP thread (60° cone seal), type A113. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external BSP thread (seal on internal cone 60°) and external BSPT thread (seal on external cone 120°) allowing the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 2500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, and water-based fluids. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
