Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight bulkhead fitting JIC 37° with external UNF thread (seal on external 37° cone). Material: AISI 316 steel.- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A114C with external BSP thread (60° cone sealing) and internal BSP thread, with swivel nut (60° cone sealing), "compact" version. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-type block tee with internal thread enabling the connection of quick couplings and UHP hoses. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to very low temperatures and harsh weather conditions. Standards: SAE 100R18, ISO 3949-R18. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: 210 bar. Operating temperature: from -55°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A109 with external thread 3 x BSP (seal cone 60°). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external BSP thread (sealing on external cone 120°) and external BSP thread (sealing on external cone 120°) allowing the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 3000 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug type A112 with internal BSP thread, with a rotating nut (60° cone seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external BSP thread (seal on internal 60° cone) and external NPT thread (seal on thread) allowing the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end, threaded, with a nut and a ring for clamping onto the hose. Recommended for LPG hose. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° plug with internal UNF thread (sealing on the internal 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A117 with internal BSP threads, with swivel nuts (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube end, screwed, with a nut and a ring for clamping onto the hose. Recommended for LPG hose. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut intended for connection with JIC37° fitting (coupling) to seamless precision hydraulic tube. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for UHP adapters with external thread. Material: carbon steel, black galvanized. Working pressure: 700 bar (with a safety factor of 4), 1000 bar (with a safety factor of 2.8). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A109 with external BSP thread (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting JIC 37° with external UNF thread (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external BSP thread (seal on internal 60° cone) and external NPT thread (seal on thread) allowing the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A202 with external BSP thread (60° cone sealing) and external NPT thread (thread sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° plug with external UNF thread (sealing on the external 37° cone). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure nipple type A202, with external BSP thread (60° cone seal) and external NPT thread (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread adapter (sealed with a metal-rubber gasket) enabling the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut intended for connection with JIC37° fitting to seamless precision hydraulic tube. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A115C compact with internal BSP threads (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° elbow fitting JIC 37° with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-F "flat-face" type IF non-drip quick coupling socket with internal BSP thread. Designed primarily for construction machinery where significant pressure fluctuations occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. The socket features a safety pin to prevent accidental disconnection. Interchangeable with ISO-F quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil). Material: steel with zinc-nickel coating. Sealing: NBR (operating temperature from -25°C to +100°C); viton (operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the size of the quick coupling). Flow has been specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for UHP adapters with external thread. Working pressure: from 2000 bar to 3000 bar (depending on thread size). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with a shut-off valve and internal BSP thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery, as well as in conveyors and mobile platforms. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR. Operating temperature: from -25°C to 100°C. Working pressure: up to 400 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking nut with BSP thread type A108, for use with adapter type A107. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight bulkhead fitting JIC 37° with external UNF thread (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A116 with external BSP thread (60° cone seal) and with external BSP thread (60° cone seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-B quick coupling socket with valve, internal BSP thread, for use in high-pressure industrial installations (water, fuels and oils, gases, chemicals). Supplied with a plug, it creates a double shut-off connection, which can be found wherever transmission lines need to be connected and disconnected for equipment servicing or maintenance, and fluid loss is undesirable. It can be used interchangeably with ISO-B quick couplings from other manufacturers. Material: AISI 316 steel. Sealing: viton. Operating temperature: from -20°C to +200°C. Working pressure: up to 250 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable asymmetrical "T" branch coupling with external thread and internal UNF thread, nut (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A114 with external BSP thread (60° cone sealing) and internal BSP thread, with a swivel nut (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external metric thread (rectangular cross-section elastomer seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-F "flat-face" type IF non-drip quick coupling with internal BSP thread. Designed mainly for construction machinery where large pressure fluctuations occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. Interchangeable with ISO-F quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil). Material: steel with zinc-nickel coating. Sealing: NBR (operating temperature from -25°C to +100°C); viton (operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the size of the quick coupling). Flow is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug type A112 with internal BSP thread, with a swivel nut (60° cone seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-drip "flat-face" ISO-F quick coupling socket with shut-off valve and internal BSP thread. Application: hydraulic power (hydraulic oil). Designed mainly for construction machinery. The socket features a safety pin to prevent accidental disconnection. The quick coupling can be operated with one hand. Interchangeable with ISO-F quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR, viton. Operating temperature: from -25°C to +200°C (depending on the type of sealing). Working pressure: up to 300 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with internal BSP thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A116 with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.
