Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector socket with external BSP thread, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: AISI 316L steel. Sealing: SBR. Working pressure: up to 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector socket with a turned end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDDC dry disconnect connector socket with internal BSP thread made of stainless steel, widely used in road, rail, marine, aviation transport, as well as in the petrochemical, chemical, and pharmaceutical industries. Installed on the hose side (hose part). The socket head is rotatable (360°). Meets all safety, environmental protection, and reliability requirements for the transfer of hazardous, toxic, or expensive fluids. Manufactured according to NATO standard STANAG 3756 (DDC 2", 2.1/2", 3", and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). Connectors comply with ATEX, TDT, ADR, RID, IMDG, pressure directive 97/23/EC. Also has the recommendation of the European Chemical Industry Council CEFIC. Sealing: o-ring (viton), flat gasket (PTFE). Working pressure: 25 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket (hose part) of the dry disconnect coupling DRY-LINK. The couplings feature a unique design that ensures safe and completely leak-free connection of installations (the amount of medium remaining on the valve surface after disconnection is immeasurable). DRY LINK couplings are characterized by: low weight, small dimensions, and compact construction - allowing easy operation in tight spaces, rotating socket connection of the coupling (hose part) - facilitates the alignment of the socket for connection with the plug and prevents hose twisting, ease of handling by trained operators, difficulty of disconnection by unauthorized individuals, high, unobstructed flow through the coupling with low pressure drop - thanks to thin valve discs arranged parallel to the flow, ease of cleaning, smooth internal passage (polished in SANITARY version), few internal parts, no dead spaces - DRY LINK couplings are ideal for high-viscosity fluids and applications requiring a high level of cleanliness (food, pharmaceutical, cosmetic substances, paints, adhesives), DRY LINK couplings can also be used for powders and in the petrochemical industry. Material: AISI 316 steel. Sealing: PTFE, viton, EPDM, or chemraz®. Connections: BSP or NPT. Working pressure: 14.3 bar for DN25 and DN40 couplings, 10.3 bar for DN50 couplings, 8.3 bar for DN80 couplings. Vacuum: up to 0.94 bar. Operating temperature: from -29°C to +110°C (viton, EPDM, chemraz®), from -7°C to +110°C (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry-mate shut-off connector socket with internal thread made of polypropylene. Used in the chemical, pharmaceutical, agricultural industries, and handling systems. Not intended for gas media and liquids with a low flash point. Installed on the hose side (hose part). The socket design is based on a ball valve, which ensures completely unobstructed flow. The socket is supplied complete with polypropylene caps. Material: body - glass fiber reinforced polypropylene, ball - PTFE, CAMLOCK latches - AISI 316 steel. Sealing: valve - PTFE, connector - viton (available in EPDM and Kalrez). Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at a working pressure of 5 bar). Maximum leakage: 2 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKey for use with various RJT hygienic connections. Available in sizes: 1", 1.1/2", 2", 2.1/2", 3" or 4". Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections size 150 and 125. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections size 250 and 205. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections in sizes 65 and 38. Material: ductile iron.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWrench for STORZ fire connections size D (25). Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTS type assembly key for TW (tank truck) connections. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° IBC elbow with internal BSP thread. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow of FERRARI lever coupling, one side ending with a socket and the other with a plug coupling, type F.25, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90o elbow with internal BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90o elbow with external and internal BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle nipple 90o with external BSP thread, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFixed flange PN16 type CNWF made of carbon steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps or clamp bands. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to the standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and solid assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 321 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple, universal, one-piece ball valve for industrial applications. Body made of hexagonal brass rod, nickel-plated, with black painted aluminum lever. Chrome-plated brass ball seated in PTFE seats. Brass stem with NBR o-ring seals, featuring blow-out protection. The MINI valve can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, compliant with the chemical resistance of the valve materials. Meets the requirements of the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), according to Article 4, paragraph 3 (without CE marking). Compliant with the RoHS 2011/65/EU material directive and REACH regulation 1907/2006. The specified minimum operating temperature applies to the valve emptied of freezing liquid. Kv - flow coefficient of the valve expressed in metric units (water flow in m³ per hour at a pressure drop of 1 bar). Body material: nickel-plated brass. Ball material: chrome-plated brass. Stem material: brass. Lever material: aluminum. Ball seal: PTFE. Stem seal: 2 x NBR o-ring. Connection: BSP thread (ISO 228-1). Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling set without valve - socket and plug with hose end intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting the two parts of the coupling relative to each other. This coupling also allows for slight rotation of the connected hose, preventing it from twisting and accidental disconnection. Versions with a valve and in black color are also available. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling set without valve - socket and plug with hose end intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting the two parts of the coupling relative to each other. This coupling also allows for slight rotation of the connected hose, preventing it from twisting and accidental disconnection. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: polycarbonate. Sealing: NBR o-ring. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +121°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete ANFOR lever coupling with welding connection for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: black steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the coupling). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-end fitting for hose, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve, and locking occurs via a knurled nut that clamps the flexible hose onto the connecting sleeve. Multiple installations are possible. Designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness. The fitting withstands short pressure spikes up to 30 bar at +20°C. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread series 1C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled unreinforced hoses and tubes made of harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass, metal, polyamide (PA), and polyethylene (PE) tubes. Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates hose cross-section reduction, which does not affect media flow. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with BSP female thread type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve for easier installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting, type NA with external BSPT and metric thread. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP series 1C type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. Designed for smooth-walled unreinforced hoses and tubes made from harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP series 1D type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion at the ends for installation (so-called flared connection). This solution guarantees no particle deposition, bacterial accumulation, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and polyethylene (PE) tubes. Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates the reduction of hose cross-section, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGON® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. Series 1W+ does not require smoothing of the grooves on the hose ends. It is intended for flexible, corrugated hoses with a smooth inner surface and unreinforced PTFE hoses. Material: PVDF. Working pressure: 4 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° swivel end for hose with GZ BSP type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve for easy installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of ends and couplings are available. Material: polypropylene, PVDF. Sealing: FKM o-ring. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd piece for railway nut under RS clamp, without gasket. Material: aluminum. Working pressure: 6 bar. Operating temperature: from -20°C to +30°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple assemblies without the need for tools. It is intended for flexible reinforced hoses with synthetic braiding (PVC, silicone). Material: polypropylene, PVDF. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with GZ BSP, type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple assembly without the need for tools. Series 1W+ does not require smoothing of the grooves on the hose ends. It is intended for flexible, corrugated hoses with a smooth inner surface and unreinforced PTFE hoses. Material: polypropylene, PVDF. Working pressure: 4 bar.
