Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type B with external BSP thread. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / Details90° TRICLOVER flange end with a smooth "tail" for rubber and plastic hoses, as well as rubber hoses with a layer of UPE, PTFE, FEP, MFA, PFA. For use in the pharmaceutical, biotechnology, cosmetic, food, and chemical industries, for liquid and high-viscosity media. The working pressure depends on the size of the connection and the type of clamp used (at least 16 bar for size 2", 10 bar for sizes above 2"). Installation: TI-LR, TI-LDR clamp sleeves or using RS shell clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO hose end made of AISI 316L stainless steel with external thread. Available in two sizes: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Material: AISI 316L steel. Working pressure: up to 25 bar. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S3 with external NPT thread (seal on the thread), made according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a stainless steel version (end fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C - for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP thread series 1D type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: PFA, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP GW type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be used multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP thread series 1C type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. Designed for smooth-walled unreinforced hoses and tubes made of harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP GW series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and tubes made of polyethylene (PE). Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates cross-sectional reductions in the hose, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with GZ BSP type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve for easy installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end for hose with GZ BSP series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation occurs by pushing the hose onto the integrated connecting sleeve, and locking is achieved using a knurled nut that clamps the flexible hose onto the connecting sleeve. Multiple installations are possible. It is designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness braid. The end withstands short pressure spikes up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end for hose with GZ BSP series 1C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled unreinforced hoses and tubes made from harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of ends and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end for hose with GZ BSP series 1D type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with GZ BSP series 2N type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and tubes made of polyethylene (PE). Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates cross-sectional reductions in the hose, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with BSP thread series 3C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards and is finished with an internal BSP thread. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available made from EPDM, FKM, Gylon®, and PTFE materials. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with GZ BSP series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards and is finished with an external BSP thread. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available made from EPDM, FKM, Gylon®, and PTFE materials. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNG type grooved end made of carbon steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNG HEAVY DUTY grooved end made of carbon steel with a "tail" for hoses with increased strength. Designed for rubber and plastic industrial hoses. Installation using special CNFH type clamping sleeve plates. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° angled tube end fitting type RBS, without a nut, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible conduits for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight TRI-CLAMP end fitting with hose stub, series 3C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end fitting is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made of EPDM, FKM, Gylon®, and PTFE. The stub is designed for soft rubber and plastic hoses (e.g., TYGON® hoses, silicone hoses). Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with self-clamping hose stub series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made from EPDM, FKM, Gylon®, and PTFE. The stub is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON®. It features an integrated sleeve, facilitating installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with self-clamping hose fitting series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available made from EPDM, FKM, Gylon®, and PTFE materials. The fitting is designed for rigid hoses and tubes made from PTFE, FEP, PFA fluoropolymers, glass and metal tubes, polyamide (PA) tubes, and polyethylene (PE) tubes. Hose/tube locking in the coupling occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates the reduction of hose diameter, which consequently does not affect the flow of media. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, universal, knurled nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNPH HEAVY DUTY end fitting with external tapered BSPT thread made of AISI 304 steel with a "tail" for high-strength hoses. Designed for rubber and plastic industrial hoses. Installation using special CNFH type clamping sleeve. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNPH HEAVY DUTY end fitting with external tapered BSPT thread made of galvanized steel with a "tail" for high-strength hoses. Designed for rubber and plastic industrial hoses. Installation using special CNFH type clamping sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSA type end fitting with external metric thread, 24° cone sealing, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSA type end with external metric thread, 60° cone sealing, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNP type end with external tapered NPT thread made of galvanized steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type clamping sleeves. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNP type end with external tapered NPT thread made of galvanized steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type clamping sleeves. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotating nut end with internal BSP thread. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded plug BSP, series 3F type EM. It has wide applications in laboratories, medicine, the pharmaceutical, chemical, and food industries. Supplied without a gasket. Material: polypropylene, polyvinylidene fluoride. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTrapezoidal external threaded plug compliant with DIN EN 12713 standard, fully compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling plug body with internal UNF thread. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting for connecting hoses type NA. Designed for use in control systems, in installations for transporting gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° connector for LAUX lever coupling, socket-plug with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a coupling for a medium other than water, attention must be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° connector for rubber and soft plastic hoses (e.g., TYGON® hoses, silicone hoses), widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, polyvinylidene fluoride, Teflon. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector for hose 90° type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The design allows for multiple installations without the need for tools. It is intended for flexible smooth-walled unreinforced hoses made of PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone, and TYGON® hoses. Material: polypropylene, PVDF. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° connector for metric plastic hoses series 1C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled unreinforced hoses and tubes made from harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° connector for hose series 1D type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° connector for hose series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass and metal tubes, polyamide (PA) tubes, and polyethylene (PE) tubes. Hose/tube locking in the connector occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates the reduction of hose diameter, which consequently does not affect the flow of media. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° connector for LAUX lever coupling 42 socket-plug with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50°C to +120°C.
