Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. length standard: 1000 mm (Available also in section 2000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 0.86 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.83 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and a spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies + A spiral steel (wall thickness wire 1.2 mm). pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 45° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.5 bar for 8.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. standard length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced meta-aramid intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm (Available also in section 2000 mm and 3000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. color layer outer: blue. Material: rubber silicone. Reinforcement: plies meta-aramid. pressure working: od 1 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector anti-vibration silicone with one corrugation reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. Pressure safety factor: 3:1. meets standard SAE J2006 R3. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow reducing silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 135° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
