Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, lightweight, highly flexible suction and discharge hose designed for general industrial applications for water and light chemicals, other liquids (excluding fats, oils, and hydrocarbons). It can also be used for air, vacuum transfer of dust and powders – abrasion resistance and potential static electricity issues should be considered. It can be used (at temperatures up to +40°C) for liquid and semi-liquid food products such as juices, beverages, beer, wine, alcohols up to 50% concentration, milk, and dairy products. It is not recommended for oils and fatty food substances. The reinforcement with a steel wire spiral embedded in a soft PVC wall provides good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. As a hose reinforced only with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. The METALFLEX PVC hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP), and FDA CFR 21 175.300 and 175.1210. It is suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 1 bar to 9 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +65°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose made entirely of abrasion-resistant polyurethane with high resistance to fats and oils. The hose is phthalate-free and can be used in the food industry for the transfer of liquid and dry food substances. This includes: - in particular, food fats and oils, e.g., olive oil (simulant D2; up to +40°C and 30 min); - milk and its derivatives, dairy beverages (simulant D1, up to +40°C and 30 min); - hydrated, acidic food, alcohol up to 20%, and dry food (simulants A, B, C, E; up to +70°C and 1 h). In applications not involving direct contact with food (in industry, construction, agriculture), it can be used for water, light chemicals, and other fat-based liquids as well as industrial oils (chemical resistance must be considered). Also used for air, vacuum transfer of dust, powders, granules, and other abrasive bulk materials (abrasiveness and potential static electricity issues must be considered). The very smooth inner surface reduces transmission losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse. The construction of the hose from polyurethane compared to similar PVC hoses results in significantly greater abrasion resistance, higher strength (working pressure and vacuum), and a wider temperature range with slightly less flexibility. The ARMORVIN TOTAL PU OIL TPHF hose complies with European regulations 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 3 bar to 7 bar - depending on the hose diameter. Operating temperature: from -40°C to +90°C, medium temperature, working pressure dependent on temperature. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose for agriculture, food industry, and general applications. Designed for water, light chemicals, sludges and wastewater, plant protection products, and other liquids (excluding fats, oils, and hydrocarbons). Also suitable for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. In the food industry, it can be used for the transfer of hydrated food, acidic substances, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +40°C). Not recommended for milk and its derivatives or food substances containing fats and oils. Reinforced with a hard PVC spiral, resistant to impact, ensuring good vacuum resistance and preventing hose collapse. The outer surface is corrugated, while the inside is smooth. The AGROFLEX LD hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: green transparent PVC. Reinforcement: white spiral made of hard PVC. Working pressure at 20°C: from 2 bar to 6 bar. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose with an inner layer made of abrasion and oil-resistant polyurethane, reinforced with a densely arranged steel spiral to increase working pressure and resistance to vacuum. Designed for air, liquids, light chemicals, in pneumatic and hydraulic systems, as well as for the transport of solid substances. The smooth inner surface reduces flow losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse, as well as a small bending radius. In general industrial applications, it can be used for water, light chemicals, and other fluids based on fats, oils, and hydrocarbons (chemical resistance of polyurethane should be considered) and for air, for vacuum transport of dust, powders, granules, and other abrasive bulk materials (abrasiveness of the medium and potential static electricity issues should be considered). It can be used in the food industry (where American FDA 21 CFR 177.2600 e, f requirements are acceptable) for liquid food substances for hydrated food ("e") and fatty food ("f"). Inner layer: transparent polyurethane. Reinforcement: steel spiral. Outer layer: transparent PVC. Working pressure at 20°C: from 12 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and elastic, universal suction and discharge hose intended for water, liquids, and light chemicals. Used for loading and unloading tankers, pallet containers, and for liquid transfer in industrial installations, etc. Maintains high flexibility at low ambient temperatures. The smooth inner wall facilitates hose cleanliness and increases discharge efficiency by 20% compared to typical rubber hoses. The outer layer is resistant to abrasion and weather conditions. In the food industry, it can be used for the transfer and handling of hydrated, acidic food, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +40°C and 2 hours). Not recommended for milk and its derivatives, as well as oils and fatty food substances. The VACUPRESS SUPERELASTIC hose complies with European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: white PVC. Reinforcement: steel spiral, polyester braid. Outer layer: black PVC. Working pressure for a temperature of 20°C: from 5 bar to 20 bar - depending on the hose diameter. Operating temperature: from -25°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and very flexible suction and discharge hose, designed for general industrial applications (in industry, construction, agriculture). It can be used for water, light chemicals, sludges and wastewater, plant protection products, other liquids (without fats, oils, and hydrocarbons) as well as for air, vacuum transport of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. Reinforced with a hard PVC spiral, impact-resistant, providing good vacuum resistance and preventing hose collapse. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is slightly corrugated, with smooth surfaces for small diameters. As a hose reinforced only with a hard PVC spiral, lacking a braid, it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. Hose material: green transparent PVC. Reinforcement: hard PVC spiral. Working pressure at 20°C: from 2 bar to 6.5 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose, intended for general industrial applications (in industry, construction, agriculture). It can be used for water, light chemicals, sludges and wastewater, plant protection products, other liquids (excluding fats, oils, and hydrocarbons) as well as for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. In the food industry, it can be used for the transfer of hydrated food, acidic substances, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +60°C and 2 hours). Not recommended for milk and its derivatives, as well as oils and fatty food substances. Reinforced with a hard PVC spiral, resistant to impact, ensures good vacuum resistance and prevents hose collapse. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is slightly corrugated, smooth for small diameters. The FLORIDA hose complies with European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent PVC. Reinforcement: hard PVC spiral (gray). Working pressure for a temperature of 20°C: from 3 bar to 6.5 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, economical suction and discharge hose for universal applications. Smooth inside, slightly corrugated outside. Designed for water, light chemicals, sludges and wastewater, plant protection products, and other liquids (avoiding fats, oils, and hydrocarbons). Also suitable for air, vacuum transfer of dust, powders, light granules, and other mildly abrasive bulk materials. Abrasiveness and potential static electricity issues should be considered. Widely used in agriculture, horticulture, and domestic applications. Hose material: green transparent PVC. Reinforcement: white spiral made of rigid PVC. Vacuum at 20°C: 0.6 bar. Operating temperature: from -20°C to +60°C. As the operating temperature increases, the working vacuum value of the hose decreases.
