A universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (momentarily +120°C).

Strong and flexible hose suction-delivery with completely made with resistant to abrasion polyurethane o high resistance to fats and oils. hose not contains phthalates and It can be used in industry food for conveying liquid and dry substances food. includes to: - in particular fats and oils food np. olive oil (simulant D2, up to +40°C and 30 min); - milk and its dairy products, drinks milk (simulant D1, up to +40°C and 30 min); - food hydrated, acidic, alcohol for 20 % and dry (simulants A, B, C, E; up to +70°C and 1 h). W use not involving direct contact with food (in industry, construction, agriculture) It can be used for water, light chemicals and other liquids based on fat and oils industrial (should take into account resistance chemical). used also for air, vacuum conveying dusts, powders, granulates and other abrasive substances bulk (should then take into account abrasion resistance and any problem electricity static). very smooth surface inner reduces losses conveying and ensures ease cleaning. transparent wall allows on visual control of the flow. Reinforcement dense spiral with wire steel ensures very good resistance to vacuum and kinking hose. made hose with polyurethane in comparison with similar hoses, PVC results considerably greater resistance on abrasion, greater strength (pressure working and vacuum) and greater range temperature at slightly smaller flexible. hose ARMORVIN TOTAL PU OIL TPHF complies with the European requirements 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanised steel spiral. Working pressure at a temperature of 20°C: from 3 bar to 7 bar - depending on the diameter hose. Operating temperature: from -40°C to +90°C, temperature medium, working pressure depends on temperature. As the working temperature rises, the hose's working pressure value decreases.

A universal flexible high quality hose polyurethane with a braid manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. hose strong od similar hoses, PVC, retaining its shape, resistant to kinking, hydrolysis and abrasion, flexible in low temperatures. Contains no cadmium, silicone, plasticisers or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: a polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at a temperature of 20°C: from 10 bar to 20 bar - depending on the diameter hose. Operating temperature: from -30°C to +70°C (momentarily +100°C). As the working temperature rises, the hose's working pressure value decreases.

High quality hose A universal intended for air, cold and hot water, oil, liquids hydraulic, light chemicals, diluted acids, liquids cleaning. strong and flexible, resistant to twisting and kinking. Layer outer non-staining, resistant to conditions weather, abrasion and oil. Due to high strength and low extensibility especially recommended for hose reels drum. The hose is non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: blue (red for diameter 15.9 mm) blend rubber Chemivic® (NBR/PVC). Working pressure: 21 bar. Operating temperature: from -29°C to +88°C.

The highest quality, very flexible, resistant to twisting and kinking A universal hose industrial. used in industry, construction, agriculture, quarries, mining and road construction, in industry petroleum and shipbuilding. Layer inner resistant to action oil, fats, light chemicals, air, kerosene (naphtha), cold and hot water. Layer outer has very good resistance to abrasion and on fats animal and oils. Due to high strength and low expansion especially recommended for hose reels drum. outer resistance to flame compliant with the standard MSHA 2G-14C/39. Non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: an aramid braid, for 2" a synthetic braid. Outer layer: yellow rubber Carbryn® (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: from -29°C to +88°C.

Pneumatic extension – ready line for air made with hose WTZ o diameter 10 mm and o length 10 or 15 m. terminated brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) standard quick coupling pneumatic Eurostandard DN 7.2. the simplest solution for connection tools pneumatic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: from -5°C to +50°C.

Light and very flexible even in low temperature hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. As a hose reinforced only with a rigid-PVC spiral, without a braid, it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. Hose material: green transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -25°C to +55°C.

Light, very soft, extremely pliable and flexible hose characterized by high resistance on bending and lack of memory shape. intended for air, water, light chemicals. retains flexibility in low temperatures. Layer outer resistant to abrasion. resistant to action radii UV, conditions atmospheric. The hose material is free of cadmium and silicone and meets the RoHS requirements. Roll length: 100 m. Inner layer: yellow (Y) or blue (BL) PVC. Reinforcement: a polyester braid. Outer layer: yellow (Y) or blue (BL) PVC. Working pressure at a temperature of 20°C: 20 bar. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -25°C to +60°C.

Multifunction hose, PVC, soft, pliable and flexible. intended for water, air and light chemicals. used often for colour differentiation of individual lines installations. On special order Available in color black. It can be used (at temperatures up to +40°C) for liquid and semi-liquid products food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. hose TCN COLOR complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure at a temperature of 20°C: from 16 bar to 22 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -15°C to +60°C.

A universal, very flexible, unreinforced hose manufactured in Great Britain. intended for pressureless (or pod very low pressure) conveying air, water and liquids in use general-industrial, for light chemicals (np. diluted acids and bases), in use laboratory, on level gauges and as A guard pipes, lines, cables itp. The hose material contains no phthalates, silicone or cadmium and complies with the REACH, RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). The stated working pressure is the approximate value of the recommended working pressure at a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +55°C (momentarily up to +65°C, working pressure depends on temperature).

A universal flexible rubber hose delivery, intended for air, cold and hot water and light chemicals (with the exception acids). resistant to acetates and ketones. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. hose o strong the structure and small elongation pod pressure. is suitable for use on drums. Layer inner electrically conductive (R 6 Ω, EN ISO 8031), Layer outer resistant to ozone and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - alcohol polyvinyl). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.