Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling for automatic reels drum SR. Material: steel AISI 303.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with BSP female thread, for an EN 14420-3 / DIN 2817 shell clamp (indices of dedicated clamps: RS 636... and RS-637...), with serrated tail, type MSLR. The coupling is intended for assembly onto, among others, industrial hoses – for example in handling applications. Working pressure: 25 bar. Coupling material: brass (MS), 316 stainless steel (SS). Sealing: flat gasket (supplied, standard polyurethane, PTFE for stainless steel). Operating temperature: from -20°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in reducing, type R8, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter ORFS with BSP male thread (60° cone sealing), type EVGE-B. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter RS with BSP, NPT and trapezoidal female and male threads is designed for connecting lines (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all kinds of media: water, air, chemical substances, petrochemical products. For very aggressive chemical substances, couplings coated with a chemically resistant ECTFE fluoropolymer lining and a conductive CF-ECTFE lining (R 6 Ω) are available. Depending on the size and manufacturer, the couplings have various shapes of wrench flats. Material: AISI 316 steel. Sealing: flat gasket (PTFE) – BSP female.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn automatic drum reel for hoses for cold and hot water, oil, greases and other media. The rewind spring tested for 25000 winding and unwinding cycles. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. A hose stopper included in the set. The reel is not equipped with a hose, which should be ordered separately. A swivel bracket or an additional fixed bracket for quick removal (e.g. in winter) ordered separately. advantages: coupling swivel of steel AISI 304 (ED-540-10 coupling swivel with brass), sealing Viton. Material drum: steel carbon painted powder. Sealing: Viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA throttle the trigger MWDSE with a thread external used in systems compressed air in order to reducing level noise. Material: brass nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead articulated for mounting na piston rod actuator. Do use in case occurrence loads nie being in axis piston rod actuator. head articulated gives greater the ability mounting. thread: M4 ÷ M36x2. Material: steel carbon galvanized (head), steel (joint).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BCS quick coupling socket without a valve, with a female BSP thread, for lances, guns and washing equipment. Material: brass nickel-plated. pressure working: 310 bar. Operating temperature: +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BAUER lever coupling socket with "tail" for hose with wide application among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: NR/SBR. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow reducing 90° with a thread internal BSP and a BSPT male thread intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based o content compounds aromatic for 50%, oily air, gaz natural (nie LPG), water oily, water cooling of agents anti-corrosion. marked na bellows single yellow stripe. Inner layer: rubber NBR (NBR). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling set 1/2" - a socket with a female thread + a plug with a hose end. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector anti-vibration silicone with one corrugation reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. Pressure safety factor: 3:1. meets standard SAE J2006 R3. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT1, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 100 (without a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. For dimension group 0 there is one bolt with an Allen head, for dimension groups 1 ÷ 6 there are two bolts with an Allen head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The left-hand OML clamp is intended for mounting CLIP type hoses (hoses of this type are made of impregnated fabric, and the left-wound spiral is made of sheet metal and steel wire), e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set: A gun Nito I Combi with short nozzle adjustable and socket quick coupling Nito 1/2" with fitting for hose 1/2". pressure working: 6 bar (for 40°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AKBO HEAVY DUTY hot-water gun of AISI 316 steel, with Teflon-air insulation and a guard protecting the trigger tongue. Equipped with a 40 cm long lance with a handle and a nozzle with stream adjustment. It is not intended for steam. Use for hot water requires particular caution. Body material: AISI 316 steel. Pusher material: stainless steel. Linings and seals of ethylene-propylene rubber (EPDM). Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuiet A universal A gun intended for removing with surfaces all contamination: liquids, fine chips, filings itp. light construction and ergonomic shape ensure easy and convenient use. A gun equipped is in special nozzle straight o length 130 mm guaranteeing safety and low level noise. mechanism the lever enables precision dosing flowing medium. Available model with adjustment flow. compliant of the standard OSHA 1910.95 (b), STD 1-13.1 and the directive 2003/10/EC. Material the body: acetal. Material nozzle: steel galvanized. diameter nozzle: 8 mm. Sealing: NBR. pressure working: 16 bar. Operating temperature: from -10°C to +60°C. flow: 260 l/m (at a pressure of 8 bar). level sound: 74 dB (at a pressure of 8 bar). force blowing: 1.72 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA displacement gear pump (hydraulic), TRALE, with external gearing, intended for use in the hydraulic systems of machines and equipment. Connections: threaded BSP. Direction of rotation: right. The stated maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: L-HM45 type hydraulic oil or equivalent. Fluid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (ambient).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLevel gauge intended for observation level oil hydraulic, mounted on side wall bowl. Available in two variants make: without thermometer and with thermometer. oil penetrates for the inside level gauge through holes in screws assembly type BANJO. Material: polyamide (body), aluminum (housing), polyamide (hole inspection). sealing: NBR. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection 90° SAE 6000 of compact design with BSP female thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless tubes precision made of AISI 316 stainless steel/316L, drawn na cold, annealed. intended for installations pressure liquids and gases, installations hydraulics power, installations fittings control-measurement. precision, o strict tolerances diameter external and wall thickness wall and controlled properties mechanical and technological material (certificate 3.1 acc. to EN-10204) ensure possibility Applications in most critical installations. The given pressure working is pressure theoretical acc. to EN 13480-3. Material: EN 1.4435, ASTM TP 316L. Standard pipe length (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with BSPT male threads, type A16, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice intended for marking ferrule clamping of size for 2". standard equipped in A handle single-line, which can contain for 16 characters o the height 3 mm. drive: pneumatic max. 6 bar. weight: 50 kg. accessories ordered separately.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: hypalon (SCM). Temperature range (approximate): from -20°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic thread sealant. Sealing of hydraulic and pneumatic systems. high viscosity, medium strength – disassembly possible. Gap maximum 0.5 mm. has certificate BAM - approval for installation with oxygen (Maximum Operating temperature: +60°C, maximum pressure working oxygen: 10 bar). color: yellow. Operating temperature: od -60°C up to +150°C. Packaging of the "tube" type with a capacity of: 50 and 200 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge hot exhaust gases engines petrol and diesel. used as hose workshop unrolled on floor adapted for drum systems winding, hose for channels suction or on stations for testing engines. resistant to creasing thanks to reinforcement white, thick, round spiral nylon (PA), cover with outside black TPE. resistant chemical, in particular on vapours gasoline and oil, a also ozone, hydrolysis, microbes and radiation UV. Not contains halogens and softeners. hose P-G-EX 1 should be used together with with vacuum system discharge exhaust gases, using appropriate connector between a hose a outlet exhaust gases with engine. Other diameters are available on special order in the scope 40 ÷ 250 mm. Assembly of the hose on connectors with bridge clamps (prawo-handed). length standard: 2.5 m, 5 m, 7.5 m, 10 m, 15 m and 20 m. Thickness measured between the spiral: 0.4 mm. Hose material: fabric polyester impregnated black coating TPE (thermoplastic elastomer). Reinforcement: spiral nylon in cover TPE protective against abrasion. Operating temperature: od -40°C up to +150°C (momentarily +170°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery, o thick wall, intended for conveying substances food requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic, steel spiral. Outer layer: blue, smooth rubber CR. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -15°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Used for installations at lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible high quality hose polyurethane manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. as hose without reinforcement is suitable for very low pressure for a few bar and as hose cover. crystalline transparent wall allows excellent observation medium. smooth surface inner facilitates flow and cleaning. hose strong od similar hoses PVC, more retaining its shape, well resistant to kinking, flexible in low temperatures. made with polyurethane – polyether, resistant to hydrolysis and abrasion. Contains no cadmium, silicone, plasticisers or halogen compounds. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of FDA 21 CFR 175.105, 177.1680, 177.2600 and WRAS for water 23°C). Hose material: soft, transparent polyurethane (polyether) free of phthalates. Operating temperature: from -30°C to +70°C (momentarily up to +100°C). temperature brittleness: -70°C. Approximate value of the recommended working pressure: from 2.5 bar to 4.8 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to vacuum hose suction-delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. length standard: 60 m or 120 m. Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: EPDM rubber / fiber glass. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C, outer up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized silicone resistant to oils and high temperatures up to +300°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHanger intended for easy storage hose 1/2" (40 meters) or 3/4" (30 meters) - REKFR60 / 1/2" (60 meters) or 3/4" (50 meters) - REKFR70. raises comfort use and increases service life hose. convenience and saving space. Material: electropolished steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFleece abrasive A-VFN for cleaning and finishing surface.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size plug 90° quick coupling without valve with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L - total length. Material: acetal. Sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. lever: steel AISI 304. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4334 intended for installations industrial. can be used for air, gases, water, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Meets the requirements of the PED 2014/68/EU directive. Working pressure dependent is od temperature use. Material the body: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. connection: BSP female/BSP male. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal directional valve with electric control (solenoid valve), without a control coil, most often used for controlling the operation of actuators. It can be mounted in-line, on a wall, directly on actuators or on a connection block. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. pressure working: up to 10 bar. Operating temperature: -10°C up to +60°C.
