Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNG type grooved end made of carbon steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: carbon steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNG HEAVY DUTY grooved end made of carbon steel with a "tail" for hoses with increased strength. Designed for rubber and plastic industrial hoses. Installation using special CNFH type clamping sleeve plates. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP tube end without nut for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP tube end with internal UNF thread for compressor, for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP tube end with external UNF thread, with socket, for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP tube end with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for 3090 type air conditioning hose. Allows for the connection of rubber hoses to air conditioning system components. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoldering tube end for air conditioning hoses type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° angled tube end fitting type RBS, without a nut, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible conduits for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), angled 45° lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), angled 45°, light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BEL), 90° angled light series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), angled 45°, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with a metric tube, sealing with a cutting ring (BES), angular 90° heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), angled 90° heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with metric tube, sealing with a cutting ring (BES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with a metric tube, sealing with a cutting ring (BES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with internal UNF thread, for hose for air conditioning type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with external UNF thread for 3055 type air conditioning hose. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded tube end UNF, for air conditioning hose type 3356 and 3090. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-ON end fitting with internal BSP thread (face seal), type YBW110, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. It features a special profile of grooves adapted to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped using bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-ON end fitting with external BSPT thread, type YBZ130, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped using bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, brass, AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-ON end fitting with external NPT thread, type YNZ110, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped using bands or clamps, as this may damage the hose. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, AISI 316 steel. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 15° threaded end for PTFE brake hoses. Material: chrome-plated carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 45° threaded end for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 90° threaded end for PTFE brake hoses. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO screw end for teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight threaded tube end, type ER, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end with internal thread and nut, type FAGR, for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end with internal thread, type FALR, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end with external thread and nut, type MAGR, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end with external thread, type MACR, for Teflon brake hoses (internal cone sealing). Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight TRI-CLAMP end fitting with hose stub, series 3C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end fitting is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made of EPDM, FKM, Gylon®, and PTFE. The stub is designed for soft rubber and plastic hoses (e.g., TYGON® hoses, silicone hoses). Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with self-clamping hose stub series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made from EPDM, FKM, Gylon®, and PTFE. The stub is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON®. It features an integrated sleeve, facilitating installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with self-clamping hose fitting series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available made from EPDM, FKM, Gylon®, and PTFE materials. The fitting is designed for rigid hoses and tubes made from PTFE, FEP, PFA fluoropolymers, glass and metal tubes, polyamide (PA) tubes, and polyethylene (PE) tubes. Hose/tube locking in the coupling occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates the reduction of hose diameter, which consequently does not affect the flow of media. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDual-sided plug end with a "tail" for a 6 mm hose, allowing for pumping the wheel from both the outer and inner sides. Equipped with a practical handle for ease of use. The length and absence of special hooks enable easy access to hard-to-reach valves in the wheel. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV plug coupling with a locking nut and INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (in size 2"). Sealing: NBR. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAK end fitting with internal BSP thread and a 200 mm anti-kink spring. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where bending of the hose is required due to the operation of the gun. The spring provides additional protection for the hose. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded UNF SAE fitting, 45° cone, for 3055 type air conditioning hose. Material: steel.
