Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 90° INTERLOCK SAE 3000, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 90° INTERLOCK SAE 6000, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 90° NON SKIVE SAE 3000 (SFL 90), series light, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 90° NON SKIVE SUPERCAT (SFC 90), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° TRICLOVER flange end with a smooth "tail" for rubber and plastic hoses, as well as rubber hoses with a layer of UPE, PTFE, FEP, MFA, PFA. For use in the pharmaceutical, biotechnology, cosmetic, food, and chemical industries, for liquid and high-viscosity media. The working pressure depends on the size of the connection and the type of clamp used (at least 16 bar for size 2", 10 bar for sizes above 2"). Installation: TI-LR, TI-LDR clamp sleeves or using RS shell clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange straight NON SKIVE SAE 3000 (SFL), series light, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange straight NON SKIVE SUPERCAT (SFC), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 (SFL), angled 45°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 (SFL), angled 90°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 (SFL), angled 90°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 SUPERCAT (SFS), angled 90°. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 (SFL), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange SAE 6000 (SFL), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which offers very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO hose end made of AISI 316L stainless steel with external thread. Available in two sizes: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Material: AISI 316L steel. Working pressure: up to 25 bar. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary end AK with external BSPT tapered thread without flange. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary end AK with external BSPT tapered thread without anti-kink spring. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together threaded fitting type S3 with NPT male thread (thread sealing), manufactured in accordance with EN 14424, intended for rubber hoses and certain types of thermoplastic hoses with soft textile reinforcement (without wire spiral). Widely used in the fuel sector in fuel and gas distribution lines (e.g., LPG). The basic version is made entirely of brass; also available in a stainless steel version (fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP female thread 1D series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. It is intended for flexible PFA hoses, whose ends must be thermally expanded for assembly (a so-called flared connection). This solution ensures no particle deposition, no bacterial build-up and elimination of medium leakage. Material: PFA, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP female thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP female thread 1C series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Assembly is carried out by pushing the hose onto the integrated connecting sleeve. Locking is achieved by means of a cutting ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled, unreinforced hoses and tubes made of harder plastics, e.g. PTFE, PFA, FEP, PA, PE. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP female thread 2N series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. It is intended for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass and metal tubes, polyamide (PA) tubes and tubes made of polyethylene (PE). The hose/tube is locked in the fitting by means of a cutting ring and a nut. The connection is sealed by a PTFE ring. This solution eliminates any reduction of the hose cross-section, which as a result does not affect the flow of media. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, which facilitates assembly, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread 1B series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Assembly is carried out by pushing the hose onto the integrated connecting sleeve, and locking is achieved by means of a knurled nut that clamps the flexible hose onto the connecting sleeve. Repeated assembly is possible. It is intended for flexible plastic hoses (PVC, silicone) reinforced with a braid, of a specified wall thickness. The fitting withstands short pressure surges up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread 1C series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Assembly is carried out by pushing the hose onto the integrated connecting sleeve. Locking is achieved by means of a cutting ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled, unreinforced hoses and tubes made of harder plastics, e.g. PTFE, PFA, FEP, PA, PE. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread 1D series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. It is intended for flexible PFA hoses, whose ends must be thermally expanded for assembly (a so-called flared connection). This solution ensures no particle deposition, no bacterial build-up and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight hose fitting with a BSP male thread 2N series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. It is intended for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass and metal tubes, polyamide (PA) tubes and tubes made of polyethylene (PE). The hose/tube is locked in the fitting by means of a cutting ring and a nut. The connection is sealed by a PTFE ring. This solution eliminates any reduction of the hose cross-section, which as a result does not affect the flow of media. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight INTERLOCK with metric female thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight INTERLOCK with BSP male thread, 60° cone, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC INTERLOCK with NPTF male thread, 60° cone, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC INTERLOCK with UNF female thread, 74° cone with an O-ring, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC INTERLOCK with UNF male thread, 74° cone, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with UNF male thread, with 74° cone sealing (AGJ), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with UNF male thread, with sealing flat (AGO), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with UNF female thread, with 74° cone sealing (DKJ), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with UNF female thread, with sealing flat (DKO), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight TRI-CLAMP fitting with a BSP female thread 3C series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The Tri-Clamp (Triclover) fitting is made in accordance with DIN 32676, ISO 2852 and BS 4825 standards and terminated with a BSP female thread. Supplied without a gasket, which should be ordered separately depending on the medium. Gaskets are available made of EPDM, FKM, Gylon® and PTFE. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight TRI-CLAMP fitting with a BSP male thread 3C series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The Tri-Clamp (Triclover) fitting is made in accordance with DIN 32676, ISO 2852 and BS 4825 standards and terminated with a BSP male thread. Supplied without a gasket, which should be ordered separately depending on the medium. Gaskets are available made of EPDM, FKM, Gylon® and PTFE. Material: polypropylene, PVDF. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with throttle valve for thermoplastic hose FR 5 DN2 (1/12"), with internal UNF thread, SAE type, 45° cone. Fitting material: brass. Sleeve material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with a sleeve for thermoplastic hose FR 5 DN2 (1/12"), with internal UNF thread, SAE type, 45° cone. Fitting material: brass. Sleeve material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with sleeve for thermoplastic hose FR 5 DN4 (5/32"), with internal UNF thread, SAE type, 45° cone. Fitting material: carbon steel, galvanized. Sleeve material: aluminum.
