Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTraditional, known and proven od lat, hose with red rubber natural. easy for installation thanks to its softness (hardness 45° Shore – A), flexible and flexibility. resistant na abrasion, o low permeability for gases and sound resistance na acids and bases. used for liquids and gases for many applications industrial and in laboratories. meets requirements FDA for contact with food. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 25 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). temperature use: from -30°C to +70°C (125°C for moist hot). temperature brittleness: -40°C. Hardness: 45° Shore (A). Density: 1.13 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose, PVC intended for water. It can be used for conveying water potable (short-term contact with water potable) – has issued in the Czech Republic certificate conformity with requirements 409/2005 Sb for this use (contact Tubes International). Do use in industry, agriculture, horticulture and use domestic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 10 bar to 17 bar - depending on the diameter hose. Operating temperature: from -5°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to oils, greases and hot chips hose intended for low-pressure feeding liquid or gas coolant at treatment metals. has tzw. memory shape, co allows on precision directing a stream substances cooling. supplied in the molds ready lines with connection with a male BSP thread ending metric a thread external. Material: black PVC. Reinforcement: steel A guard leading, Diameter DN 10 has additional spiral cover with nickel-plated sheet steel. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery of reinforcement steel and with layer external resistant na oil, for conducting steam saturated and superheated. Layer inner o sound resistance na high temperature and steam saturated. can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na oil, temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial, in particular tam, where required is resistance layer outer na oils, greases and other products petrochemical. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. hose VAPOFER EN ISO 6134 is version antistatic (R ≤10 6 Ω), compliant with the standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black rubber synthetic, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x15 cm or 100 cm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 1900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial hose high-pressure for water for cannons snow resistant to abrasion, aging, rotting, radiation UV, conditions atmospheric and ozone. designed for continuous use at high pressure. flexible in low temperature. thanks to coating outer in yellow color perfectly visible on snow, even in dusk. supplied with mounted couplings type CAMLOCK (socket C and plug E) in version high-pressure 60 bar of steel stainless AISI 316. available also other length lines DN52 (e.g. 25, 30 and 40 m). Maximum length hose 60 m. Inner layer: EPDM rubber. Reinforcement: double polyester braid. Outer layer: yellow, special coating resistant to abrasion. Working pressure: 60 bar. Operating temperature: od -40°C up to +80°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a female NPT thread in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a female NPT thread in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a female NPT thread in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a male NPT thread in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 350 mm. number segments: 14 pcs Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a male NPT thread in system 1/2" LOC-LINE® made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. available length: 400 mm, 500 mm and 600 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a male NPT thread in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 20 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 900 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a male NPT thread in system 1/4" LOC-LINE® made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. available length: 400 mm, 500 mm and 600 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine for coolant with nozzle and valve with a male NPT thread in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. length standard: 360 mm. number segments: 16 pcs Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil line for coolant made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. Available in four sizes (Diameter bore 1/4", 3/8", 1/2" and 3/4"). Available length: 15 m. Material: acetal. Working pressure: up to 3 bar, depending on the diameter. maximum Flow rate: 1700 l/h, depending on the diameter. Operating temperature: up to +65°C.
