Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermoplastic hose terminated with TEMA 100 plug with TA-M-120 coupling and TA-M-150 socket TEMA 100. Cable length: 2.5 m. Operating temperature: from -40°C to +93°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber molded hose without reinforcement, flexible and stretchable (in diameter) with a special corrugated shape, ensuring resistance to kinking when bending and the ability to cut into sections of required length. Produced in lengths of 1 m, which can be cut and easily shaped in installation. Available in a basic version made of EPDM rubber, for water, cooling fluids, resistant to diluted acids and bases, at elevated temperature and ozone. Operating temperature range from -40°C to +135°C (TUBANO) and in a version with increased external oil resistance, made of a different synthetic rubber. Operating temperature range from -30°C to +120°C (TUBANO OIL). Hose material: molded EPDM rubber. Working pressure: 1.5 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible rubber pressure hose, intended for air, cold and hot water, and light chemicals (except acids). Resistant to acetates and ketones. Can be used for dispersive water-based epoxy and polyurethane paints. Not suitable for oils, fuels, aromatic hydrocarbons, cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. For chemical applications, we recommend contacting Tubes International. The hose has a strong construction and low elongation under pressure. Suitable for use on reels. Inner layer electrically conductive (R<106 Ω, EN ISO 8031), outer layer resistant to ozone and weather conditions. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - polyvinyl alcohol). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for hot water pressure washing equipment. The outer layer is resistant to abrasion, oils, and animal fats. High flexibility facilitates operator work. Inner layer: black NBR rubber. Reinforcement: single textile braid, single steel braid, or double steel braid. Outer layer: yellow Carbryn®/NBR blend. Working pressure: 103 bar (for hose with nominal inner diameter DN12 - 83 bar), 206 bar, or 310 bar, depending on hose type. Operating temperature: from -30°C to +93°C (for hose with single textile braid), from -30°C to +120°C, for others.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry ice blasting hose – granulated solid carbon dioxide. Dry ice cleaning is used for removing coatings, adhesives, residues, etc., in various industrial sectors. The advantages of the process include no damage to the cleaned surface, no aggressive chemicals, no water in the process (compared to high-pressure water cleaning), and no abrasive residue (compared to sandblasting). Dry ice (solid carbon dioxide) has a temperature of up to -78.5°C (melting point), in granulated form, and sublimates to gas during the process. The DRY ICE hose is specifically designed for the transport of dry ice. The inner layer is smooth, made of anti-static synthetic rubber resistant to abrasion and low temperatures. The outer layer is anti-static, abrasion-resistant, weather-resistant, and ozone-resistant. It is fitted with quick couplings and specialized dry ice cleaning guns. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -55°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for pressure cleaning of sewage systems with water. Standard lengths: 80, 100, 120, 150, 180, 200, 250 m. Inner layer: thermoplastic polyester. Reinforcement: double polyester braid. Outer layer: orange for JC 7 and red for JC 8 polyurethane, abrasion-resistant. Working pressure: from 200 bar to 345 bar (depending on the diameter and type of hose). Operating temperature: from -40°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose intended for high-pressure washing and flushing of sewage systems. Outer layer resistant to abrasion, oil mist, and weather conditions. Manufactured according to standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for conveying wine, fruit juices, beer, and water, with smaller diameters. Can be used with drum reels. Completely free of animal-derived ingredients, phthalates, plasticizers, and nitrosamines. Highly resistant to cleaning and disinfection processes used in the food industry. Inner layer is tasteless and odorless. Outer layer is abrasion and aging resistant. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C to +80°C (temporarily up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-soiling, abrasion-resistant, oil and grease resistant, high-quality FORTRESS® hose. With an external Microban® antibacterial coating and high flexibility, it finds wide application in cleaning devices in the cosmetic, food, pharmaceutical industries, etc. Inner layer: black NBR rubber. Reinforcement: single textile braid or single steel braid. Outer layer: yellow Carbryn® rubber protected with a Microban® coating. Working pressure: 69 bar or 207, depending on the type of hose. Operating temperature: from -30°C to +93°C or from -30°C to +120°C, depending on the type of hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft fuel hose made of special NBR rubber resistant to methyl ester of fatty acid rapeseed oil (RME). Reinforcement with synthetic textile braid. Outer layer made of chloroprene rubber (CR), antistatic, self-extinguishing, resistant to abrasion, temperature, and aging. Particularly recommended for biofuels based on methyl esters of fatty acids (FAME) such as biodiesel B10, B20, B100. Resistant to methyl ester of fatty acid rapeseed oil (RME). Can also be used for regular diesel fuel. Inner layer: special NBR rubber. Reinforcement: synthetic textile braid. Outer layer: CR rubber. Working pressure: 15 bar. Operating temperature: from -30°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight transparent smooth-walled hose made of natural (non-regenerated) fluoropolymer PFA (perfluoroalkoxy), a material with properties similar to PTFE. The hose features excellent chemical resistance, dimensional and shape thermal stability, a very smooth, micropore-free internal and external surface, high pressure resistance, and crack resistance due to excessive stress. Good transparency of the hose allows for easy observation of level or flow. UV resistant. Designed for low-pressure installations of aggressive chemicals or when high purity and chemical inertness of the hose material are required. Commonly used in laboratories, chemical and pharmaceutical industries. Due to its excellent insulating properties (dielectric strength 3 to 4 times greater than PTFE), it is used in the electronics and semiconductor industries. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Hose material: PFA. Shore hardness (D) 60. Operating temperature: from -200°C to +260°C. Working pressure: from 7 bar to 19.5 bar - depending on the diameter and wall thickness of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSmoothbore Teflon hose version with reinforced wall made of specially processed Teflon (reduced microporosity) for use with high-pressure gases and other penetrating substances, in double steel braid. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C increase in temperature. Installation: use AF-TL series fittings and sleeves... Hose material: smooth PTFE. Reinforcement: double braid of 304 steel. Working pressure: from 180 bar to 225 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCHEMFLUOR TH hose is a flexible Teflon hose designed for high-pressure hydraulic, pneumatic, and gas installations. The inner layer made of conductive Teflon prevents the accumulation of electrostatic charges. Hose material: black, conductive PTFE. Reinforcement: AISI 304 steel braid. Operating temperature: from -50°C to +200°C. Working pressure: 345 bar. Burst pressure at 20°C: 1100 bar. Burst pressure at 200°C: 820 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The heavy-duty HW version is recommended for harsher working conditions, gases (up to 100 bar), and applications where there are cyclic temperature changes. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a 4:1 factor is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for the hose AF-HWDB-10 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: double braid of AISI 304 steel. Working pressure: from 40 bar to 350 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. A double braid should be used for higher pressures and where there is (within permissible limits) greater bending or kinking of the hose. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance of R<10^8 Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a factor of 4:1 is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: double braid of AISI 304 steel. Working pressure: from 70 bar to 360 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon hose tube is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 316 steel wire, with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. Safety factor 3:1; if a 4:1 factor is required (e.g., according to EN 16643), values should be multiplied by 0.75. At operating temperatures above +130ºC, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1ºC above this temperature. For example, at a temperature of 170ºC, the maximum working pressure for the hose AF-SWSB-316-06 is: 240 bar – (170ºC-130ºC) x 0.75 = 240 bar – 30% = 168 bar. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 316 steel. Working pressure: from 80 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAntistatic hose (R < 3x104 Ω/m) designed for the transmission of non-conductive media. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transfer of aggressive chemical substances such as paints and solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for high-pressure hydraulic systems. Inner layer: polyester. Reinforcement: aramid braid + steel braid (UH-OL8M-06 - hose reinforcement consists of two aramid braids). Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble hose consisting of two strands of STANDARD type hose. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, antistatic (R<1.2x105 Ω/m) hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braiding. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Resistant to seawater. Micro-perforated on request (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Available in a double version with a venting hose. Standards: ISO 15500-17. Inner layer: black conductive polyamide. Reinforcement: one or two aramid braids + synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for low-pressure industrial installations. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other system components. To maintain LPG homologation, special brass screw fittings must be installed. Standards: ECE R67-01. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Also available in a micro-perforated version (for gases and air). Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Exceeds SAE 100R8, ISO 3949-R8 requirements. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to seawater. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to very low temperatures and seawater. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -54°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose intended for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R18, ISO 3949-R18. Installation: use fittings type Z. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). The inner layer is made of black, smooth NBR/PVC rubber blend. Reinforcement with layers of durable synthetic cord. It features copper wires ensuring electrical continuity between the hose ends – provided there is proper connection to the fittings. The outer layer is made of chloroprene rubber (CR), flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 bar, 27 bar) are also available upon special order, with specified breaking strength under tension (2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord. Outer layer: black CR rubber. Working pressure: 17 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction hose designed for the transfer and distribution of liquid products in the petrochemical industry, containing up to 50% aromatic hydrocarbons (e.g., diesel, heating oil, gasoline with up to 50% aromatics). Suitable for fueling pumps. Inner layer made of black, smooth synthetic rubber. Reinforcement with synthetic cord. Features two copper wires ensuring electrical continuity between the hose ends (resistance R < 100 Ω between ends) – provided that the wires are correctly connected to the ends. Outer layer made of high-quality synthetic rubber resistant to oil and weather conditions. Hose compliant with the requirements of standard EN 1360:2013 type 1 class M for fuel distribution systems. Available in lengths up to 120 meters. Inner layer: black synthetic rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong fuel transfer hose for aviation fuel, designed for direct pressure refueling of aircraft. It can also be used in fuel transfer operations in airport tankers – dispensers, in cases not requiring high vacuum. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord. Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer, in accordance with EN ISO 1825 requirements, ensures the required low resistance of the hose between the ends (103 Ω < R < 106 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type C/Ω) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Hoses with fluorescent marking visible at night and a transfer hose with an antistatic cord (type B/M) are available upon special request. Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
