Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o elevated resistance to abrasion for use for equipment for washing pressure cold and hot water. resistant to detergents in solutions water used e.g. for washers pressure, oils, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: single or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o excellent resistance temperature and strength on elevated pressure made of special, non-flammable polymer. has calibrated diameter external. Material is resistant to aging and action radiation UV, characterised good properties sliding co counteracts abrasion material. Material impermeable for gases, resistant to action greater concentrated bases and acids inorganic, organic, alcohols and solvents in elevated temperatures. has properties electrical-insulating. calibrated Diameter outer allows connection with plugs or couplings leading manufacturers. accuracy dimensional ensures constant strength on compression even for hoses with greater diameter makes, that is suitable for wider range practical applications. Hose material: polyfluoride vinylidene PVDF. Working pressure: from 16 bar to 80 bar (depending on the diameter hose). Operating temperature: od -50°C up to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended specially for installations pneumatic automotive systems brake. Not contains plasticisers, not stiffens and is resistant to radiation UV. Available only in black. standard: ISO 7628 : 2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: od -40°C for + 100°C (for media based on water +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hydrophobic hose delivery made in accordance with technology improvement platinum. free of odour and taste. smooth surface prevents adhesion contaminants. sterilization steam in temperature +135°C, alternatively argon, cobalt. compliant with requirements FDA, USP kl.VI, European Pharmacopoeia 3.1.9 and directives EC 1935/2004 and EC 2023/2006 (GMP). Safety factor 3:1. Inner layer: semi-transparent silicone. Reinforcement: a polyester braid. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. especially recommended for industrial or automotive installations hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose pneumatic with polyethylene and aluminum for use in pneumatic systems control. very good resistance chemical layer outer allows on operation in environment aggressive chemical. Reinforcement in the molds aluminum coating increases strength hose co allows on assembly long sections without additional brackets. additional its advantage is possession tak called memory shape, enabling assembly in hard reachable places. can work buried without needs use additional covers. thanks to unique design, hose is about 5 times lighter od standard hoses pneumatic. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible double hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on the diameter hose). Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and a spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies + A spiral steel (wall thickness wire 1.2 mm). pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic carbon aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: synthetic cord. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-hose in outer cover with black polyurethane, intended for installations pneumatic, hydraulic, oil, fuel, lubrication and chemicals. various color hoses enable easy identification individual circuits supply or various media. amount hoses: 2. Hose material: polyamide PA 12 (nylon). Working pressure: from 7.5 bar to 33 bar (in dependence od diameter and wall thickness wall hose). Operating temperature: od -20°C up to +80°C (for liquids containing water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of steel stainless intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter F on the end index means version FLOPPY, not maintaining shape. Material: steel AISI 304. Operating temperature: up to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of carbon steel intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter "F" on the end index means version FLOPPY, not maintaining shape. Material: galvanised carbon steel. Operating temperature: up to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for use in installations, in which medium constitutes hot and cold water, water cooling with addition agents for treatment water, water drinking, water industrial, solutions chlorine, glycol, acids, principles, milk lime, esters and ketones, water sea. Nie should have contact with substances oily. It has a PZH certificate for drinking water. Inner layer: rubber EPDM. Reinforcement: nylon braid. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: up to +100°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose with conductive fibres in the braid (R 4 Ω/m) intended for solvents, paints, isocyanate, polyol, water-based fluids. standards: ISO 8031, SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: a double polyester braid with conductive fibres. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible hose intended for conveying food, pharmaceutical and cosmetic substances: water, fruit juices, beer, wine, vinegar, alcohols with a concentration up to 96%, milk and dairy products, creams, soaps, aromatic substances, pigments and others. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. The extruded, completely smooth inner and outer surface of the hose facilitates flow and cleaning. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. Use for high-proof alcohol (its vapours or other flammable substances) requires taking into account the hazards associated with static electricity. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: a polyester braid. Working pressure: from 7 bar to 12 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Also available in a micro-perforated version (for gases and air), marked with the letters "MP" at the end of the index. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 375 bar - depending on the diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for absorbing vibration and vibration and movements linear and angled in installations water. Nie serves for conveying media containing oil. It has a PZH certificate for drinking water. Inner layer: rubber EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. the connection: BSP female, cast iron, galvanized. Operating temperature: from -10°C to +100°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. For use in the vicinity of transformers and medium- and high-voltage electrical installations. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compensator intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon braid. Outer layer: rubber NBR. Flanges: galvanized carbon steel. Operating temperature: up to +80°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose non-conductive charges electrical - leakage in conditions testing acc. to standards SAE 100 R8 smaller od 50 µA for voltage 246 kV/m through 5 min., used in the vicinity installation electrical. Inner layer: polyester. Reinforcement: two aramid braids. Outer layer: orange polyurethane. pressure working: 700 bar. temperature use: from -40°C to +100°C (for water and liquids na base water max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8 (except DN8). Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, antistatic (R 4 Ω/m) hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. standards: ISO 8031, SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid with conductive fibres. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hose intended for filling gas cylinders. An odourless inner layer compliant with the requirements of FDA 21 CRF, directive 2011/10/EC and CGA G-7.1-2004 (for breathing air). Must not be used for explosive gases, e.g. oxygen, hydrogen. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: an aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. For use in the vicinity of transformers and medium- and high-voltage electrical installations. Non-conductive - leakage under the standard's test conditions lower than 50 µA for a voltage of 246 kV/m over 5 min. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 5182 l/h. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hose intended for CO2 systems in industrial and marine firefighting installations. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -60°C to +93°C.
