Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very flexible and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant na steam o high temperature. Layer outer resistant na high temperature and conditions atmospheric. Do steam water use special fitting screw-together screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to elongation service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: double braid steel. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. Operating temperature: from -40°C to +210°C (momentarily up to +230°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance na high temperature and steam saturated. Layer outer resistant na temperature, abrasion, conditions atmospheric and ozone. hose wide used in industry for low-pressure steam saturated – for light applications. For water steam, use special fittings bolted with screws, intended for water steam. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 6 bar. temperature use: from -40°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose delivery made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV A, Journal Officiel Brochure 1227 and directives CE 1935/2004. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible pressure hose delivery general purpose. used for air, water, light chemicals and liquid and semi-liquid products food such jak water, juices, beverages, beer, wine, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-CR). Not recommended for food substances containing fats and oils. is suitable for milk and its products (nie is suitable for milk and products milk hose o index SO-PVCSTAR-CR). free of phthalates. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1). Dla hoses o index SO-PVCSTAR-CR: 1) general: EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). Material hose: transparent PVC. Reinforcement: braid polyester. pressure working: from 8 bar to 22 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure line with fitting and restrictors deflection intended for equipment for pressure washing cold and hot water. resistant to detergents, oils, ozone and conditions atmospheric. standard fittings: M22 female x 1.5 (steel AISI 304). Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, micro-perforated synthetic rubber. Operating temperature: od -10°C up to +155°C. Working pressure: 500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, six-layer hose intended for washing cold and warm water and light chemicals. Layer inner o elevated resistance to temperature. layer intermediate and outer resistant to detergents, agents disinfecting. Layer outer in quality food, o elevated resistance to greases, fats, oils. hose highly resistant to kinking. recommended for use in industry food. compliant with the European requirements for substances food EU No.10/2011 (simulant fluids A, B, C). recommended the fitting TR-THERMO-12-BZ140-08-SS. Inner layer: smooth PVC. Reinforcement: double polyester braid. Outer layer: smooth PVC. Working pressure: 50 bar. Operating temperature: od -15°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers strength cord synthetic. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber CR. pressure working: 20 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth rubber NBR. Reinforcement cord synthetic. has cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber NBR. pressure working: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. especially recommended and Widely used in hospitals and ambulances. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium - blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong industrial hose delivery for water and for compressed air, intended for use in heavy conditions in industry, construction ways, a even in quarries. Layer inner resistant to mist oil. resistant to abrasion and conditions atmospheric. commonly used and proven in various use industrial. hose Available in colour black and yellow. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality thin-walled hose type BARRIER for flow freon in single braid polyester for use in automotive and industrial systems air-conditioning and refrigerant working based on freon R134a, R1234yf, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to abrasion and conditions atmospheric. standards: SAE J2064 type C Class I. Inner layer: black rubber CR divided layer nylon (PA). Reinforcement: a polyester braid. Outer layer: black rubber CIIR, micro-perforated. Working pressure: 35 bar. Operating temperature: od -35°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 95°. Available in natural and blue. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on the diameter hose). Operating temperature: od -40°C up to +75°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installations, chemicals, paints, adhesives, fuels liquid and gas, oils, greases, air, gases, water, steam and liquids na base water. used we all types industry. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. can be used also as mechanical guiding cables or tie rods of regard na low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: smooth PTFE (teflon). hardness Shore (D): 58. temperature use: from -200°C to +260°C. pressure working: od 2.3 bar for 10.8 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant na high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black or red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for high-pressure washing cold and hot water. resistant to abrasion, ozone and detergents. Not is suitable for cleaning steam. standards: EN 1829-2:2008, EN 853 1SN or EN 853 2SN - compliance dimensional. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: black or blue synthetic rubber. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProduced with high quality raw based on ether, retaining through long period time flexibility, hose spiral, giving for use in difficult conditions industrial. has memory shape, thanks to which po many years use Diameter coil remains unchanged. excellent for applications in applications, which require use hoses resistant to abrasion, brittleness and unfavourable conditions atmospheric. equipped in coupling swivel allowing on elimination stresses longitudinal hoses, during ich use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting fitted in quick coupling and plug type 26KA, of spring reinforcing. length working is 80-90% total length line. Hose material: light-blue polyurethane PUR. Working pressure: up to 12 bar (depending on the diameter hose). Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon type BARRIER (thick-walled) intended for automotive and industrial systems refrigerant and air-conditioning working based on freon R134a, R12, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to oil, abrasion and conditions atmospheric. standards: SAE J2064 type C Class II. Inner layer: black rubber CR, Layer nylon (PA). Reinforcement: two braids polyester. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on the diameter hose. Operating temperature: od -30°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose intended for washing cold and warm water and light chemicals. Layer outer resistant to fats animal and vegetable. recommended for use in industry food. compliant with the European requirements for substances food 1935/2004 CE and 2007/19/CE (simulant fluids A, B, C). use fittings crimped for hoses THERMOCLEAN. Inner layer: white, smooth PVC. Reinforcement: cord polyester. Outer layer: blue, smooth PVC. Working pressure: from 26 bar to 30 bar (depending on the diameter hose). Operating temperature: od -15°C up to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and at the same time light hose polyamide, intended for installations pneumatic, oil, fuel, hydraulic, resistant to chemicals and greases. It has a calibrated outer diameter, allowing the use of push-in fittings, which significantly shortens and simplifies its assembly. compliant with the standard DIN 73378. Available in colours: yellow, orange, red, blue, green, natural and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -55°C up to +100°C (for media based on water +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose welding for oxygen made acc. to standards ISO 3821. is characterized resistance on kinking and action conditions atmospheric. Not recommended for gases generated based on fuels, oils and gas LPG. Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: blue smooth rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE SB (HYDRAFLON) has layer inner made with high quality seamless PTFE ensuring minimal porosity, maximum flexibility and resistance na vibration. braid made is with treated thermally wire of steel stainless AISI 304 o strength 1700 MPa. used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water, itp. - as well as for classic high-pressure hydraulic oil installations. hose HYPERLINE SB is version hose SMOOTHBORE of wall o medium wall thickness and diameter internal adjusted for standard ends hydraulic; assembly using standard straight jaws clamping. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses HYPERLINE SB, in version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. at temperature use above +130°C maximum pressure working should reduced o 0.75% na each 1°C rise temperatures. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. pressure working: from 80 bar to 350 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and rinsing installations and machine in industry food steam water and hot water. Layer inner meets requirements FDA 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant na fats vegetable and animal. hose high quality, commonly used for cleaning and rinsing hot water or steam installations and machine in industry food (np. dairies, industry meat). Note: nie should use hose simultaneously for water and steam water. For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. length standard rolls: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: synthetic cord. Outer layer: blue rubber NBR/PVC. pressure working: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). temperature use: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for pressure washing hot water. Layer inner resistant to detergents, Layer outer resistant to abrasion, oils, ozone and conditions atmospheric. standards: ISO 1307. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: black or blue synthetic rubber (micro-perforated). Working pressure: 250 bar or 400 bar, depending on type hose. Operating temperature: od -40°C up to +120°C or od -40°C up to +150°C, depending on type hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o elevated resistance to abrasion for use for equipment for washing pressure cold and hot water. resistant to detergents in solutions water used e.g. for washers pressure, oils, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: single or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon o high diameter intended for automotive (especially trucks and buses) and industrial systems refrigerant and air-conditioning working based on freon R 134a and R404a and oils mineral and synthetic PAG and POE. Layer outer resistant to oil, abrasion, high temperature and conditions atmospheric. standards: SAE J2064 type B (dimensions SAE 100R5). assembly: use bolted or crimped fittings special. Inner layer: black rubber IIR. Reinforcement: a steel braid. Outer layer: black rubber CSM, micro-perforated. Working pressure: 35 bar. Operating temperature: od -40°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery used for washing cold and warm water and for conveying light chemicals, detergents and agents disinfecting. Do use in industry food. corresponding requirements European for substances food according to regulation 1935/2004 CE and the directive 2007/19/CE (simulant fluids A, B, C). should use fittings type hydraulic (TI-Z...) appropriate crimped ferrules, or fittings fixed using two clamps, which should be tightened po first use at higher temperature. fittings and ferrules should fix po earlier heating hose in water o temperature +60°C through 30 seconds. Inner layer: white, smooth PVC. Reinforcement: cord synthetic. Outer layer: blue, smooth PVC. Working pressure: 33 bar. Operating temperature: od -15°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery, very flexible, resistant na aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (np. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants na base glycols. Nie is suitable for oils, fuels, carbon aromatic. can be used for various paints water-soluble and na base ketones and esters. Nie is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black rubber EPDM. Reinforcement: single or double (DN 32÷38) braid textile spiral. Outer layer: black rubber EPDM. temperature use: from -40°C to +120°C (momentarily up to +140°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. Terminated on both sides with a straight section and ends with a male BSPT thread. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose PUSH-IN for products lubricating o calibrated diameter outer intended for connecting of couplings push-in PUSH-IN. Dla temperatures use above +20°C, should reduced maximum pressure working hose in accordance with value coefficient correction: (temperature use/factor correction) +20°C/1.00; +30°C/0.83; +40°C/0.72; +50°C/0.64; +60°C/0.58; +70°C/0.52; +80°C/0.47. Material: polyamide 66. Operating temperature: od 0°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installations chemicals, paints, fuels, oils, greases, air, gases, water, steam and liquids na base water – we all types industry. as inert chemical and free of components, which could penetrate for medium internal, can be used for substances food. compliant with FDA 21 CFR 177.1550, EU 10/2011, EC 1935/2004 and Italian D.M. 174 06/04/2004. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. can be used also as mechanical guiding cables or tie rods of regard na low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 3:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: PTFE (teflon). temperature use: from -60°C to +260°C. pressure working: from 3 bar to 56 bar - depending on diameter and wall thickness wall hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose, PVC general purpose and for products food. used for compressed air, water, liquids cooling based on water, light chemicals and liquid and semi-liquid products food. smooth wall inner reduces losses flow and ensures ease cleaning. W industry food It can be used for conveying food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C and 0.5 h). Not recommended for milk and dairy products or food substances containing fats and oils. hose RAGNO CR complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 8 bar to 20 bar - depending on the diameter hose. The working pressure value decreases as the temperature rises. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for cold and hot water for heavy conditions use, demanding high flexibility, resistance to abrasion, conditions atmospheric and ozone. used m.in. for cooling and temperature control moulds injection. It can be used for air. use for temperatures above +95°C reduces service life hose. Not is resistant to oil, not recommended also for air with mist oil. recommended assembly rings or ferrules clamping. Inner layer: black EPDM rubber. Reinforcement: a synthetic braid. Outer layer: black, blue or red EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +95°C (20 bar), od -30°C up to +140°C (10 bar), momentarily up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose intended primarily for washing rooms and equipment in industry food. It can be used for air, cold and hot water, oil, liquids hydraulic, light chemicals, liquids cleaning. strong, flexible, resistant to twisting and kinking. Layer outer non-staining, resistant to conditions atmospheric and abrasion, oil and fats, o elevated resistance to fats animal. Due to high strength and low extensibility especially recommended for hose reels drum. Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: blue blend rubber Chemivic® (NBR/PVC). Working pressure: 20.7 bar. Operating temperature: od -29°C up to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHighly flexible and resilient hose polyurethane, having optimal properties mechanical and very high strength on compression in wide the scope temperatures. The calibrated outer diameter and wall thickness allow the use of easy-to-use push-in fittings from leading manufacturers. Resistant to abrasion, solvents, fuels, hydrocarbons. used in pneumatic and hydraulic systems, tool lines and industrial robots, etc.. Hardness per Shore (A): 90°. Available in colour natural, black, blue, green, red and yellow. Hose material: polyurethane PUR. Working pressure: from 9 bar to 14.3 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral, reinforced hose intended specially for workshops automotive, for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth hose with natural (non-regenerated) polymer fluorine FEP (fluorinated ethylene propylene), material o properties close for PTFE. hose is characterized excellent chemical resistance, stability temperature dimensions and shape, smooth surface inner and external. good transparency hose allows na easy observation level or flow liquid. resistant na radiation UV. intended for low-pressure installations aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Ze regard na excellent properties insulating used in industry electronic and semiconductors. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. Material hose: FEP. hardness Shore (D) 55. temperature use: from -200°C to +206°C. pressure working: od 4.25 bar up to 13 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, resistant to kinking and action conditions atmospheric hose welding for acetylene made acc. to standards ISO 3821. Not recommended for gases generated based on fuels, oils and propane - butane (LPG). Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: smooth red rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
