Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, ergonomic nozzle with smooth flow regulation by rotating the head (closed - narrow stream - wide stream). Brass nozzle, head and handle made of blue polypropylene. Connection: GZ 3/4" BSP. Working pressure: up to 16 bar. Operating temperature: up to +50°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar). Length: 239 mm.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hose guide for use with a high-pressure washing gun. It limits the possibility of hose kinking at the connection point to the gun. Designed for hoses DN6 and DN8.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSolid nozzle for washing and cleaning with water, whose flow is regulated by manually bending the rubber nozzle. The flow is closed when the nozzle is not bent, ensuring water and time savings during operation. The nozzle is extremely resistant to damage (from stepping on it, being run over by a vehicle, etc.). Water Saver is available in 4 versions with nozzles of different diameters and flow rates (type L, M, R, and S). Made of brass, the nozzle is made of black nitrile rubber. Working pressure: up to 7 bar. Continuous operating temperature: up to +65°C (temporarily up to +100°C). Length: 230 mm. Connection: GW 3/4" BSP with a seal.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSolid nozzle for washing and cleaning with water, whose flow is regulated by manually bending the rubber nozzle. The flow is closed when the nozzle is not bent, ensuring water and time savings during operation. The nozzle is extremely resistant to damage (from stepping on it, being run over by a vehicle, etc.). Water Saver is available in 4 versions with nozzles of different diameters and flow rates (type L, M, R, and S). Made of stainless steel, the nozzle is made of black nitrile rubber. Working pressure: up to 7 bar. Continuous operating temperature: up to +65°C (temporarily up to +100°C). Length: 230 mm. Connection: GW 3/4" BSP with a seal.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrush without a handle made of durable material and natural bristles intended for washing cars and other components. Connection material: brass. Working pressure: up to 5 bar. Flow rate: 60 l/min. Operating temperature: up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCollet sleeve for thermoplastic hoses type JC7 and JC8, intended for pressure cleaning of sewage systems with water. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWater gun handle AKBO with internal BSP thread in EPDM rubber cover. Material: stainless steel. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, ergonomic, lightweight water gun with adjustable outlet nozzle, smooth flow regulation, and trigger lock. Housing: composite material. Nozzle: chrome-plated brass. Working pressure: up to 12 bar. Operating temperature: up to +80°C. Flow rate: 50 l/min (5 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for hot water pressure washing equipment. The outer layer is resistant to abrasion, oils, and animal fats. High flexibility facilitates operator work. Inner layer: black NBR rubber. Reinforcement: single textile braid, single steel braid, or double steel braid. Outer layer: yellow Carbryn®/NBR blend. Working pressure: 103 bar (for hose with nominal inner diameter DN12 - 83 bar), 206 bar, or 310 bar, depending on hose type. Operating temperature: from -30°C to +93°C (for hose with single textile braid), from -30°C to +120°C, for others.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for pressure cleaning of sewage systems with water. Standard lengths: 80, 100, 120, 150, 180, 200, 250 m. Inner layer: thermoplastic polyester. Reinforcement: double polyester braid. Outer layer: orange for JC 7 and red for JC 8 polyurethane, abrasion-resistant. Working pressure: from 200 bar to 345 bar (depending on the diameter and type of hose). Operating temperature: from -40°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose intended for high-pressure washing and flushing of sewage systems. Outer layer resistant to abrasion, oil mist, and weather conditions. Manufactured according to standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-soiling, abrasion-resistant, oil and grease resistant, high-quality FORTRESS® hose. With an external Microban® antibacterial coating and high flexibility, it finds wide application in cleaning devices in the cosmetic, food, pharmaceutical industries, etc. Inner layer: black NBR rubber. Reinforcement: single textile braid or single steel braid. Outer layer: yellow Carbryn® rubber protected with a Microban® coating. Working pressure: 69 bar or 207, depending on the type of hose. Operating temperature: from -30°C to +93°C or from -30°C to +120°C, depending on the type of hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunctional AKBO gun, equipped with a special quick connector at the outlet, without a guard in the form of a trigger guard. This gun can be used to: apply foam to cleaned surfaces, wash with water using an adjustable stream from the gun, spray e.g. disinfectant (with the appropriate nozzle). Note: the gun's quick connectors and nozzles are not interchangeable with other systems! Material: brass. Trigger made of stainless steel. Guard made of blue EPDM rubber. Sealing: EPDM. Connection (inlet): GW 1/2" BSP. Maximum working pressure: 24 bar. Maximum operating temperature: +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunctional AKBO gun, equipped with a special quick connector at the outlet, with a guard in the form of a stainless steel arch. This gun can be used to: apply foam to cleaned surfaces, wash with water using an adjustable stream from the gun, spray, for example, a disinfectant (with the appropriate nozzle). Note: the gun's quick connectors and nozzles are not interchangeable with other systems! Material: brass. Trigger made of stainless steel. Guard made of blue EPDM rubber. Sealing: EPDM. Connection (inlet): GW 1/2" BSP. Maximum working pressure: 24 bar. Maximum operating temperature: +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for high-pressure cleaning devices, under nut M22x1.5. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water quick coupling NiTO plug with internal metric thread and sealing sleeve (NT-65632B9 - without sealing sleeve). Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO quick coupling plug for high-pressure water with external metric thread. Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMG4000 pressure regulating valve with a knob for use in car washes. It features precise pressure regulation. Made of brass, with a ball and ball seat made of stainless steel. The regulator has an inlet of 2 x 3/8" BSP (1 bypass) and an outlet of 3/8" BSP. The regulator is also equipped with a pressure gauge connection of 1/4" BSP. Working pressure: 280 bar. Nominal flow: 40 l/min. Operating temperature: +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTank with a capacity of 1L for cleaning and foaming agent, with an injector and foam nozzle, with a quick coupling for connection to the multifunctional gun AKBO MNAP2-BL.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning agent tank for the NiTO Clean set. Available in various colors (green, blue, red, and yellow) for easier identification of the used agent. Capacity: 1.4 liters.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of outlet nozzles for NITO II gun. Nozzles 20, 30, and 60 l/min (5 bar), made of brass. 3 mm hex key for nozzle installation. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO connector set, socket and plug for high-pressure water quick coupling with internal BSP threads. Material: chrome-plated brass (socket), hardened steel (plug). Working pressure: 250 bar. Operating temperature: +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint AK with internal BSP thread and external BSP thread designed for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: chrome-plated brass. Working pressure: up to 30 bar. Sealing: EPDM.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint AK with external BSP threads intended for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: brass. Working pressure: up to 30 bar. Sealing: EPDM.
