Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rail intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 301 using a nut ADES or ADESD. Shipped in 2 m lengths. Material: steel carbon or steel AISI 304.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. For dimension group 0 there is one bolt with a hexagonal head, for dimension groups 1 ÷ 6 there are two bolts with a hexagonal head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. For dimension group 0 there is one bolt with a hexagonal head, for dimension groups 1 ÷ 6 there are two bolts with a hexagonal head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 heavy clamp, type 201 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rail intended for mounting clamp DIN 3015 heavy type 201 using a nut ADESP. Shipped in 2 m lengths. Material: steel carbon or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut with a metric thread intended for mounting a DIN 3015 standard clamp type 100/101 and a DIN 3015 double clamp type 201 on an ABINS rail. Material: alloy zinc with aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 301 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 201 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. For dimension group 0 there is one bolt hole, for dimension groups 1 ÷ 6 there are two bolt holes. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA long bottom plate for bolting, for mounting a DIN 3015 standard clamp type 100/101. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon, galvanized or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 heavy complete type 201. Material: steel carbon or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStacking bolt for clamp DIN 3015 standard type 100/101 with a thread external and internal metric, intended for mounting clamps one na the other. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 heavy clamp, type 201 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. For dimension group 0 there is one bolt hole, for dimension groups 1 ÷ 6 there are two bolt holes. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 100 (without a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. For dimension group 0 there is one bolt with an Allen head, for dimension groups 1 ÷ 6 there are two bolts with an Allen head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 double complete type 301. Material: steel carbon or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 standard complete type 100/101. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. For dimension group 0 there is one bolt with a hexagonal head, for dimension groups 1 ÷ 6 there are two bolts with a hexagonal head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut with a metric thread intended for mounting a DIN 3015 standard clamp type 100/101 and a DIN 3015 double clamp type 201 on an ABINS rail. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 heavy clamp, type 201 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 100 (without a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. For dimension group 0 there is one bolt with an Allen head, for dimension groups 1 ÷ 6 there are two bolts with an Allen head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: aluminum. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top for mounting clamp DIN 3015 heavy complete type 201. Material: steel carbon, galvanized or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut with a thread metric intended for mounting clamp DIN 3015 heavy type 201 on a rail ABINP. Material: alloy zinc with aluminum or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 100 (without a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. For dimension group 0 there is one bolt with an Allen head, for dimension groups 1 ÷ 6 there are two bolts with an Allen head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 201 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material clamp: rubber. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40° up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 301 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top for mounting clamp DIN 3015 standard complete type 101. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon, galvanized or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: rubber. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: aluminum. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA multiple bottom plate for welding, for mounting DIN 3015 standard clamps type 100/101. For dimension groups 0 ÷ 3, number of clamps: 10. For dimension groups 4 ÷ 5, number of clamps: 5. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 100 (without a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. For dimension group 0 there is one bolt with an Allen head, for dimension groups 1 ÷ 6 there are two bolts with an Allen head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: rubber. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt with a hexagonal head for clamp DIN 3015 standard complete type 101 with a thread external metric. Material: steel carbon, galvanized or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt with a hexagonal head for clamp DIN 3015 heavy complete type 201 with a thread external metric. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top for mounting clamp DIN 3015 double complete type 301. Material: steel carbon, galvanized or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bolt with an Allen head for a complete DIN 3015 standard clamp type 100 with a male metric thread. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStacking bolt for clamp DIN 3015 double type 301 with a thread external and internal metric, intended for mounting clamps one na the other. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 201 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: aluminum. Operating temperature: up to +350°C.
