Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and external metric thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: up to 350 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A115A with internal BSP thread (seal on the thread) and with internal BSP thread (seal on the thread). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange end (SFL), 90° angle, light series. Designed for clamping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with internal BSP or NPT thread (3/16" ÷ 1"), with valve, ideally suited for gas media. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 240 bar (depending on the size of the quick coupling), (safety factor 4:1). Material: AISI 303 steel. Sealing: NBR (from -40°C to +121°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A121 with external BSP thread (60° cone sealing) and SAE 6000 flange (O-ring sealing or other gasket in the flange groove). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard quick coupling plug DIN with internal BSP thread. Mainly used in agricultural machinery. Different dimensions from both ISO-A and ISO-B. Standard: manufacturer standard. Applications: hydraulic power (hydraulic oil). Working pressure: up to 400 bar (depending on coupling size). Material: galvanized steel. Sealing: NBR (from -25°C to +100°C). Flow rate provided at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter with external BSPT thread (seal on the thread) and internal BSP thread (60° cone seal), with a swivel nut. Used in hydraulic systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction of type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z – with a regular hydraulic "tail" for hose), BANJO for screw with metric thread (RNM). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A204 with internal BSP thread, with a rotating nut (60° cone seal) and external NPT thread (thread seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSNAP-TITE quick coupling plug with internal BSP thread, American-made, without valve. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Working pressure: up to 759 bar (depending on the size of the quick coupling), safety factor 2:1. Material: carbon steel, galvanized. Sealing: NBR. Operating temperature: from -35°C to +120°C. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure JIS type A505 adaptor with external metric thread (sealing inverted cone 60°) - KOMATSU and with external BSP thread (sealing ISO-6149 type G - O-ring with retaining ring). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with external BSPT thread, sealing on the thread using Teflon tape or liquid sealant; possible sealing on a 60° cone (AGR-K). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SNAP-TITE quick coupling plug with internal BSP thread, manufactured in the USA, features a unique valve design that allows for laminar flows. Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 345 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Sealing: NBR (operating temperature: from -35°C to +120°C), EPR (operating temperature: from -56°C to +120°C), viton (operating temperature: from -26°C to +204°C). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure plug JIS type A506 with external metric thread (sealing inverted cone 60°) - KOMATSU. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and external metric thread. "Push-pull" version - automatic disconnection upon accidental tensioning of the hose. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: 250 bar. Safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z – with a regular hydraulic "tail" for hose), with internal UNF thread and nut, flat sealing (ORFS), 90° angle. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN quick coupling socket type HK with internal NPT or BSP thread. Compliant with ISO 7241-1 B standard. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Material: AISI 303 steel, AISI 316. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to 149°C), EPDM236 (for use with steam at temperatures above +149°C), viton (operating temperature from -29°C to +204°C). Working pressure: up to 344 bar (depending on the size of the quick coupling). Flow is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), heavy-duty series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN type HK quick coupling with internal BSP or NPT thread. Compliant with ISO 7241-1 B standard. Quick couplings designed and manufactured in accordance with the PED 2014/68/EU directive. Quick couplings in sizes from 1/2” to 1” are made of special hardened steel, providing increased resistance to pressure pulsations. In the case of pulsating pressure with the coupling disconnected, the maximum working pressure should be reduced by 50%. Can be used interchangeably with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Material: galvanized steel. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to +149°C), viton (operating temperature from -29°C to +204°C). Working pressure: up to 345 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket without valve quick coupling TEMA STANDARD (NORDIC RANGE) with internal BSP thread. The socket has an additional o-ring (besides size 3/16"), making it suitable for gas installations. It also features a safety ring to prevent accidental disconnection. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew quick coupling with zero leakage - socket, type RH, with external metric thread DIN 2353. The flat design of the front surface prevents fluid loss during disconnection. Coupling is allowed under residual pressure of 50 bar. Application: hydraulic power (hydraulic oil). Material: carbon steel with zinc-nickel coating. Socket sealing: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 420 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hoses), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGROMELLE series H-5000 quick coupling plug with internal BSP and metric thread. Designed for applications with high working pressure, pressure impulses, mechanical loads, and frequent connecting and disconnecting. Designed and manufactured in accordance with the PED directive 2014/68/EU. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). In the case of pulsating pressure at the disconnected coupling, the maximum working pressure should be reduced by 50%. Material: galvanized steel. Sealing: NBR (operating temperature from -20°C to +100°C), above size 1" viton (from -20°C to +200°C). Working pressure: up to 1000 bar (depending on the size of the quick coupling), safety factor 3:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hoses), with external BSP thread, 60° sealing cone (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with internal BSP or NPT thread (3/16" ÷ 1"), with valve, ideally suited for gas media. Can also be successfully used in hydraulic systems for hydraulic oil, as well as in industry for water, steam, fuels, oils, or chemicals. Interchangeable with ISO-B quick couplings from other manufacturers. Working pressure: up to 345 bar (depending on the size of the quick coupling), (safety factor 4:1). Material: carbon steel, galvanized. Sealing: NBR. Operating temperature: from -40°C to +121°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard quick coupling socket DIN with internal BSP thread. Mainly used in agricultural machinery. Different dimensions from both ISO-A and ISO-B. Standard: manufacturer standard. Applications: hydraulic power (hydraulic oil). Working pressure: up to 400 bar (depending on coupling size). Material: galvanized steel. Sealing: NBR (from -25°C to +100°C). Flow rate provided at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), 45° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and external metric thread. "Push-pull" version - automatic disconnection upon accidental tensioning of the hose. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: 250 bar. Safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBX7 clamping sleeve for thermoplastic hoses type R6, R7, or R8. Installation - no machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), angled 45°, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProtective cap for DIN quick-connect plug, prevents dirt from entering the connector and system, which could result in damage to hydraulic system components. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A quick coupling socket cap protecting the couplings from contamination, which may result in damage to components and the ingress of impurities into the system. Available in colors: red, yellow, green, blue, or black. Material: PE or PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP or NPT thread (3/16" ÷ 1"), with valve. Ideally suited for gas media, as it features two O-rings and a backup ring, can also be successfully used in hydraulic systems for hydraulic oil, as well as in industry for water, steam, fuels, oils, or chemicals. Interchangeable with ISO-B quick couplings from other manufacturers. Working pressure: up to 345 bar (depending on the size of the coupling), (safety factor 4:1). Material: carbon steel, galvanized. Sealing: NBR. Operating temperature: from -40°C to +121°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
