Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper plate for mounting DIN 3015 standard clamp type 101. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel, galvanized or AISI 316L steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle fitting ORFS with external BSP thread (O-ring seal with washer), type WE-BG. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for rubber hydraulic hoses type 2SN (R2T). Use only with a screwed fitting from the same supplier (TI-S…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-conductive hose - leakage during testing according to SAE 100 R8 standard less than 50 µA at a voltage of 246 kV/m for 5 minutes, used near electrical installations. Inner layer: polyester. Reinforcement: two aramid braids. Outer layer: orange polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8 (except DN8). Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for clamp DIN 3015 type 101 made in accordance with the DIN 3015 standard. It typically features a profiled (grooved) surface for the pipe opening. Insert material: rubber. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external BSP thread (rectangular cross-section elastomer seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for rubber hydraulic hoses type 1SN(R1AT). Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp insert DIN 3015 type 101 manufactured according to DIN 3015 standard. It typically features a profiled (grooved) surface for the pipe opening. Insert material: aluminum. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight rotary joint GGIL with ball bearing designed for hydraulic oil. Used in systems requiring a rotary connection to eliminate hose stress. The joint is intended for rotation at low torque. Not designed for operation at high rotational speeds. Material: galvanized steel. Sealing: NBR. Connection: GZ / GW BSP. Operating temperature: from -40°C to +106°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hydraulic adapter, type A101, with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultiple lower plate for welding for the assembly of DIN 3015 standard type 100/101. For size group 0 ÷ 3, number of clamps: 10. For size group 4 ÷ 5, number of clamps: 5. For size group 0, there is one hole for a screw. For size group 1 ÷ 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 backing flange with socket for welding to connect with flange fitting, without fastening screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure sleeve, type FM, placed in the nut, allows for proper compression of the metric pipe to the fitting (coupling). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type SAE100R7, MT1, MTH1, OL7M or VE7M. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angular swivel joint GG90 with ball bearing designed for hydraulic oil. Used in systems requiring a rotating connection to eliminate hose stress. The joint is intended for rotation at low torque. Not designed for operation at high rotational speeds. Material: galvanized steel. Sealing: NBR. Connection: GZ / GW BSP or NPT. Operating temperature: from -40°C to +106°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A101 with external BSP threads (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal metric thread and nut, metal-metal sealing on a 60° cone (DKM). Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: rubber. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight rotary joints GIL with ball bearing designed for hydraulic oil and other industrial media. Used in systems requiring a rotary connection to eliminate hose stress. The joints are intended for rotation at low torque. They are not designed for operation at high rotational speeds. Material: AISI 316L steel. Sealing: viton. Connection: GZ / GW BSP. Operating temperature: from -15°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle fitting JIC 37° with external thread and internal UNF thread, nut (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A102 with external BSPT thread (seal on the thread) and external BSP thread (seal cone 60°). Material: AISI 316L and AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), angular 90° lightweight series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 backing flange with internal thread for connection to flange fitting, without mounting screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagon head screw for clamp DIN 3015 standard complete type 101 with external metric thread. Material: carbon steel, galvanized or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight rotary joint R-GGL with ball bearing designed for hydraulic oil. Used in systems requiring a rotary connection to eliminate hose stress. The joint is intended for rotation with low torque. Not designed for operation at high rotational speeds. Material: galvanized steel. Sealing: NBR. Connection: GW / GZ BSP. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer adapter, high-pressure type A103, with external BSP thread (60° cone seal) and internal BSP thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with metric tube, sealing with a cutting ring (BEL), light series. Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external BSP thread (rectangular cross-section elastomer seal). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSliding valve, type 4/3, electrically controlled with centering springs, intended for panel mounting. Used in hydraulic systems of industrial machines. Standardly supplied with O-rings and mounting screws. couplings are equipped with diodes indicating power status. Material: cast iron (body), hardened steel (slider). Sealing: NBR. Maximum operating pressure: 315 bar (ports P, A, B), 160 bar (port T). Available for the following control voltages: 12 V DC, 24 V DC, 110 V AC, or 220 V AC. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagon head screw for heavy-duty clamp DIN 3015 complete type 201 with external metric thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angular swivel joints G90 with ball bearing designed for hydraulic oil and other industrial media. Used in systems requiring a rotating connection to eliminate hose stress. The joints are intended for making rotations with low torque. They are not designed for operation at high rotational speeds. Material: AISI 316L steel. Sealing: viton. Connection: GZ / GW BSP. Operating temperature: from -15°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adaptor type A114C with external BSP thread (60° cone seal) and internal BSP thread, with swivel nut (60° cone seal), "compact" version. Material: carbon steel, galvanized.
