Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner smooth, antistatic, very resistant to abrasion (50±5 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer resistant to conditions atmospheric and ozone. hose intended for conveying dry strong abrasive substances: cement, sand, gravel etc. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick hose suction - delivery intended for conveying wide range wet and dry substances abrasive. thick Layer inner smooth, antistatic, resistant to abrasion (70 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer corrugated, resistant to conditions atmospheric and ozone. hose intended is for conveying substances abrasive mixed with water and dry: cement, sand, gravel, seeds etc. appropriate for use in heavy conditions - „Heavy Duty”. can be bent on relatively small radius bends, whereas its deflection requires considerable force. can be also easily cut on sections directly on space use and mounted of special fittings flanged PN10 (fitted on external surface hose). used in many use, e.g. for handling substances bulk in ports, for transport cuttings in mining, in industry chemical, in construction at works demolition, for suction and conveying water and sludge in works at dewatering, in gravel pits and sand plants, in works dredging and dredging. assembly: hose intended for mounting system VOLGA FRA – aluminum half-flanges PN10 applied externally on hose. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong delivery hose intended for pneumatic conveying of dry abrasive substances. Layer inner with white, smooth, resistant to abrasion rubber (≤110±5 mm 3 acc. to ISO 4649, formerly DIN 53516), o quality food, free of phthalates, compliant with requirements FDA 21 CFR 177.2600 for contact with food dry and BfR XXI kat.4. Reinforcement cord synthetic. Two built-in copper wires which, after earthing (or connection to an earthed end), discharge electric charges. Layer outer with rubber conductive electrically, resistant to conditions atmospheric and ozone. A hose intended for conveying dry food substances: grain, sugar, powders, feed, granulates, etc. and other abrasive substances, e.g. PVC granulate, for which a white, non-staining inner layer is required. It is not intended for work in ATEX explosion-hazard zones. available in two versions: BN standard (pressure working 6 bar) and BN SPECIAL (pressure working 8 bar). Standard length: 60 m (or 120 m - contact Tubes International). standards and requirements: industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Inner layer: white rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 6 bar or 8 bar. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane, o wall thickness od 0.6 mm (DN30) for 1 mm (DN100). The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP) – refers to liquid substances food. Inner layer: transparent polyurethane. Outer layer: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 5 bar, depending on the diameter hose and temperatures. Vacuum: for 0.7 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting extremely resistant to abrasion. thick Layer inner with rubber o exceptionally sound resistance to abrasion (40±5 mm 3 acc. to ISO 4649 / DIN 53516). exceeds requirements standards ISO 3861:2008. The antistatic inner and outer layer prevents the accumulation of electric charges. Used for strongly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. Mounted with special sandblasting ends. length standard: 60 m / 40 m for diameter 16 mm (or 120 m - contact with Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting extremely resistant to abrasion. thick Layer inner with rubber o exceptionally sound resistance to abrasion (36 mm 3 acc. to ISO 4649:2014). exceeds requirements standards ISO 3861:2008. The electrically conductive inner layer and antistatic outer layer prevent the accumulation of electric charges. Used for strongly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. Mounted with special sandblasting ends. Inner layer: black rubber NR/BR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber SBR. Working pressure: 12 bar. Operating temperature: od -35°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane. The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Inner layer: transparent polyurethane. Reinforcement: rigid-PVC spiral. Hose material: transparent PVC. Working pressure: from 3 bar to 7 bar - depending on the diameter hose and temperatures. Vacuum: from 0.69 bar to 0.74 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft hose delivery, for greater diameters and small wall thickness almost flat at rest, intended for pneumatic conveying dry substances bulk. Layer inner with black, smooth, antistatic (R 6 Ω), resistant to abrasion rubber (70±5 mm 3 acc. to ISO 4649, formerly DIN 53516). Reinforcement cord synthetic. Layer outer with antistatic (R 6 Ω) rubber resistant to abrasion, conditions atmospheric and ozone. hose used primarily for handling cement, sand, gravel, silica and other dry materials abrasive with tankers railway, road and silos. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber NR/SBR. Working pressure: from 5 bar to 6 bar - depending on the diameter hose. Operating temperature: od -40°C up to +70°C. indexes marked on the end letters XE have layer inner with rubber antistatic o high resistance to abrasion (abrasion resistance 50 mm 3 acc. to ISO4649) and with a cable copper.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 - oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer corrugated with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use, traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. assembly: hose intended for mounting system GHIBLI - aluminum half-flanges PN10 applied externally on hose. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR/NR. Working pressure: from 8 bar to 10 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and pliable hose rubber, for extraction and transport sand, gravel, cement and other abrasive materials. Also used in systems for cleaning and removing abrasive material after abrasive blast treatment. Layer inner smooth, with abrasion-resistant rubber o wall thickness 3 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum. designed both for extraction as and use pressure. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black or brown rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber NR/SBR. Working pressure: from 2 bar to 3 bar - depending on the diameter hose. Vacuum: for 0.9 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for plastering. Layer inner with rubber o sound resistance to abrasion (70±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. multiple Reinforcement cord synthetic ensures high strength pressure. Layer outer resistant abrasion, conditions atmospheric and ozone. used for spraying wet mortar: cement, plaster and gypsum in works construction. commonly used for units plastering. Mounted with special plastering ends. hose NIAGARA LIGHT to version economical o slightly thinner wall (marked letter "L" on the end index). length standard: 60 m and 40 m version LIGHT (or 120 m - contact with Tubes International). Inner layer: black rubber SBR/NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 40 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner with white, smooth, resistant to abrasion rubber (80 mm 3 acc. to ISO 4649, formerly DIN 53516), compliant with requirements FDA 21 CFR 177.2600 for contact with food. Two built-in copper wires which, after earthing (or connection to an earthed end), discharge electric charges. Layer outer resistant to conditions atmospheric and ozone. A hose intended for conveying dry food substances: grain, sugar, powders, feed, granulates, etc. and other abrasive substances, e.g. PVC granulate, for which a white, non-staining inner layer is required. It is not intended for work in ATEX explosion-hazard zones. Standards and requirements: Food industry, food contact: 1935/2004/EC, 2023/2006/EC (GMP), BfR XXI kat.4. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: white rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 6 bar to 8 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 – oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, dust carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use – traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 12 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and extremely pliable hose rubber, for extraction dusts, powders and other lightly abrasive materials. Layer inner smooth, with abrasion-resistant rubber o wall thickness 2.4 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum for 0.6 bar. Not is intended for use with overpressure, designed only for vacuum (extraction). Due to lightness and exceptional as on hose rubber flexible perfectly works in systems vacuum cleaning in industry, on example in quarries or smelters. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Vacuum: for 0.6 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting. thick Layer inner with rubber o very sound resistance to abrasion (50±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. Used for sand and steel shot in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. commonly used in industry metal and shipbuilding. Mounted with special sandblasting ends. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber NR/SBR. Working pressure: 12 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and thick hose suction-delivery intended for conveying bulk substances abrasive e.g. powders, cement, granulates, abrasive etc. externally Serrated, inside smooth. Layer inner with resistant to abrasion polyurethane. is characterized good resistance on impacts external and heavy conditions use. resistant to radiation UV and low temperatures. hose has arranged next to spiral cable copper coated polyurethane, which po earthing (or connection with earthed fitting) discharges charges electrical. used in installations industrial, for handling, in construction and industry shipbuilding. Inner layer: blue polyurethane. Reinforcement: rigid-PVC spiral. Hose material: grey and violet PVC. Working pressure: from 5 bar to 6 bar - depending on the diameter hose and temperatures. Vacuum: for 0.9 bar. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, smooth, flat rollable hose intended for discharge bulk materials. especially used in installations exposed on vibration and damage mechanical. is suitable for contact with food and in industry pharmaceutical being free of taste and odour, in the scope conformity with requirements FDA (21CFR177.2600). Not is subject to hydrolysis and is resistant to microbes. resistant also on oils mineral, aging, factors atmospheric, ozone, UV and many substances chemical. Hose material: transparent polyurethane. Working pressure: from 0.135 bar to 1.03 bar, depending on the diameter hose. Operating temperature: -40°C up to +90°C (momentarily +125°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning dry ice – granulate solidified dioxide carbon. cleaning dry ice used is for removing coatings, adhesives, deposits etc. in many fields industry. advantage process is no damage cleaned surface, no aggressive substances chemical, no water in process (in comparison for cleaning high-pressure water), no residue abrasive (in comparison with sandblasting). dry ice (solidified dioxide carbon) has temperature for -78.5°C (temperature melting), moulds granulate and in during process sublimates for the molds gas. hose DRY ICE designed is specially for conveying dry ice. Layer inner smooth, with antistatic rubber synthetic resistant to abrasion and low temperature. Layer outer antistatic, resistant to abrasion, conditions atmospheric and ozone. mounted with use quick couplings of specialist guns for cleaning dry ice. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -55°C up to +130°C.
