Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket SAFLOK® DU with a thread internal BSP is a variant of the CAMLOCK coupling with protection against accidental opening of the coupling. The protection consists of resilient latches placed in the levers of the socket. When the lever is closed, the latches lock automatically. Unlocking during opening requires pulling back the latches. socket SAFLOK® DU is compatible with other CAMLOCK couplings made in accordance with the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. The 1/2" size coupling has a 1/2" thread and a 3/4" socket. Material: steel AISI 316. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size socket quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. The characteristic design (it does not contain balls and a locking sleeve) allows easier, secure one-hand connection and disconnection. An audible click signals a successful connection. Length L - total length. Material: acetal. Sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK D with a thread internal BSP made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. Levers: steel AISI 304. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlanking flange SAE 3000 for use in hydraulic systems, Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compensator intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon braid. Outer layer: rubber NBR. Flanges: galvanized carbon steel. Operating temperature: up to +80°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet seals replaceable for actuator ISO 15552 Ø 160 - 200. Material: NBR. Diameter: Ø 160, Ø 200.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting hydraulic screw-together, type S, with BSP female thread with a nut, 60° sealing cone (DKR). intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) M22x1.5 female / (outlet) M18x1.5 male. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pincers intended for installing EAR-CLIP type or similar clamps. The jaw profile allows easy and reliable front crimping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight Gun water – air (air is used for increasing force stream). made with aluminum, fittings with brass chrome-plated, A guard with rubber EPDM, nozzle with plastic. used in plants industry meat. Connection: 2 x A fitting for hose 10 mm. Working pressure: 5 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top for mounting clamp DIN 3015 standard complete type 101. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon, galvanized or steel AISI 316L.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° adjustable ORFS with BSP male thread (sealing an O-ring with washer), type WE-BG. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConvenient gloves working five-finger, made with strength material - nylon. inner side gloves coated polyurethane. available in size: 9 or 10.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA profiled seal according to DIN3869 for high-pressure fittings with a metric and/or inch thread according to DIN 3852-11E. Material: NBR, hardness 85 acc. to Shore'a.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and strength on high pressure hose for compressed air. designed for applications in difficult conditions use – „heavy duty”. Layer outer resistant to aging, ozone and conditions atmospheric. used in industry, mining, quarries, construction, road engineering etc. On special order: 1. Layer outer compliant with MSHA; 2. Layer inner resistant to mist oil; 3. other diameter, pressure and color; 4. version resistant to temperature up to 100°C. possibility mounting ends for hose. length standard: 60 m or 120 m. Inner layer: black rubber SBR. Reinforcement: a double steel braid. Outer layer: yellow EPDM rubber. Working pressure: from 30 bar to 70 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose intended for conveying liquid substances food, water potable, chemicals. Layer inner hose made is with polyethylene high density (HDPE) o quality food. Material ten meets high requirements for water potable both in the scope the absence migration components for standing in hose water as and the absence tendency for formation biofilm (test microbiological). simultaneously Meets the requirements of for contact with food for liquid substances food and has very high resistance chemical (acids, bases, carbon, solvents). therefore hose It can be used for: 1) installations water potable (Germany: KTW, DVGW); 2) liquid substances food (water, juices fruit, alcohols, milk and its dairy products, fats and oils); 3) chemicals in wide the scope (selection in contact with Tubes International Sp. with o.o.). thanks to multilayer the structure hose, where layer intermediate and outer made are with soft polyethylene, hose is very flexible. Do mounting should use fittings with spigot ("tail" for hose) not having sharp barbs, which could po clamping cut layer inner with HDPE. standards and requirements : 1) industry food, contact with food - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP). 2) approval for water potable KTW-A (certificate German institute hygiene) and DVGW W270 (microbiological test material). Inner layer: polyethylene HDPE. layer intermediate: natural soft polyethylene PE. Reinforcement: a polyester braid. Outer layer: blue soft polyethylene PE. Working pressure: 16 bar, dependent od temperatures. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose NEOPRENE 1, o two layers fabric impregnated neoprene and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o small radius bending enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: spiral with wire steel, on outside two cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic adhesive of high viscosity for securing screws against unscrewing, very strong, difficult disassembly. color: green. Maximum thread diameter: for M20 or R3/4". Working temperature range: od -60°C up to +180°C. Breakaway torque for the screw: 30-35 Nm. Time to reach initial strength: 2-5 min (depending on material). Time to reach full strength: po 2-4 h (depending on material). Pen-type container.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 3/4" with a thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBuckles for the system band Band-It® Standard. Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 201.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7163 intended for installations gas, in class pressure MOP 5-20. Meets the requirements of the PED 2014/68/EU directive and 2009/142/WE, compliant with the standard EN331 + A1. Maximum Working pressure fixed in full the scope temperatures use. Material the body: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: steel carbon. sealing the ball: PTFE. sealing stem: FKM + NBR. connection: BSP female. Operating temperature: from -20°C to +60°C
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-U with valve check with a thread internal used mainly as safety valve. When mounted on the supply connections of the actuator, it allows air flow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in the control pressure. pressure working: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Material the body: brass nickel-plated. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet nozzles rubber for guns CEJN for Applications na delicate surfaces; direct installations na tube. Available diameter: Ø 14 mm, Ø 25 mm and Ø 34 mm. pressure working: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled 90° adjustable with a thread internal, type R34/F, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter three-piece long for high-pressure equipment washing with connection metric M22x1.5. Material: brass. pressure working: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn automatic drum reel made of acid-resistant steel, intended for cold and hot water, oil, greases and other media. The rewind spring tested for 25000 winding and unwinding cycles. compliant with the directive ATEX 94/9 IIB 2GD c T4 T135C X. A hose stopper included in the set. The reel is not equipped with a hose, which should be ordered separately. A swivel bracket or an additional fixed bracket for quick removal (e.g. in winter) ordered separately. Advantages: swivel connection made of AISI 304 steel, Viton sealing. Material: steel AISI 304. Sealing: Viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for foam 50200 with a thread external 1/2” BSP, angle opening jet 50°, flow 200 l/min at a pressure of 20 bar. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional wrench with a flexible steel arm ending in a 7 mm socket, for ASFA-L, ASFA-S and similar worm-drive clamps. The arm length allows work in hard-to-reach places. A comfortable, ergonomic handle ensures a secure grip. Handle color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation sanitary, cold and hot water, water pool, sea, drinking. Nie is suitable for oils mineral, water cooling of agents anti-corrosion containing oil, oily air and for installation where fixed pressure working exceeds 10 bar. Marked na bellows single red point. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (momentarily +120°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of replaceable seals for a compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 80, 100.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance extension ventilated with cover nozzle, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple for connecting two hoses garden with mounted sockets quick coupling. Material: PVC. Working pressure: up to 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal A gun class "premium" for air, water a also liquids non-explosive, created for more demanding users. effectively cleans air and water surfaces with contamination. ideal works for cooling surfaces at machining metals. is characterized unrivaled force blowing, with the possibility regulating shape stream - od narrow for wide and the possibility regulating rate. construction nozzle guarantees no leakage medium. plastic edges nozzle prevents damage cleaned surfaces. light construction, anti-slip handle and ergonomic shape the gun ensures large comfort use. resistant na impact and cracking housing qualifies device for use in difficult conditions. Material: polyoxymethylene (POM), elastomer thermoplastic (TPE), aluminum (Al). Sealing: NBR. pressure working: 16 bar. pressure bursting: 64 bar. Operating temperature: from -20°C to +60°C (16 bar) / up to +80°C (10 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for washing and cleaning water, which stream adjustable is at use thumb. Im greater radius bend, this stream water is stronger, a its shut-off occurs in moment return nozzle for position horizontal. nozzle is resistant to damage external (stepping on, driving over vehicle etc.). made with rubber EPDM, head made with brass. W case use with hot water, should maintain particularly agents caution. Not It is intended for steam! Connection: 3/4" BSP female. Maximum Working pressure: 16 bar. Maximum Operating temperature: +65°C (work continuous). Flow rate: 13.5 l/min (at pressure 2.5 bar). weight: 280g. length: 230 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA standard handle (lever) for CAMLOCK couplings, type HR. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp self-closing in full coating epoxy (increased protection against corrosion, Material non-toxic, free od halogens) intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation and high and low temperatures. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "Y" reducing of couplings push-in under hose o diameter metric, series S, type PYM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together ferrule for non-skive rubber hydraulic hoses type 2SN (R2T). Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA seal with a circular cross-section (O-ring) for general use (Range 2.9x1.78 ÷ 17.3x2.4). Material: NBR, hardness 70 acc. to Shore'a.
