Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality PVC hose intended for water. Can be used for the transmission of drinking water (short-term contact with drinking water) – has been issued a compliance certificate in the Czech Republic according to the requirements of 409/2005 Sb for this application (contact Tubes International). For use in industry, agriculture, horticulture, and domestic applications. Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure at 20°C: from 10 bar to 17 bar - depending on the diameter of the hose. Operating temperature: from -5°C to +60°C. As the operating temperature increases, the working pressure value of the hose decreases.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe UPS crimping press is designed for crimping textile-reinforced hoses with EC-type ferrules using a manual lever. It is standardly equipped with two sets (6 crimping segments each) of jaws. The working range for the internal diameter of crimped hoses for the UPS-1 press: DN 3 ÷ 8 (internal diameter range of EC ferrules: 8 ÷ 17 mm), DN 10 ÷ 16 (internal diameter range of EC ferrules: 18 ÷ 28 mm). The working range for the internal diameter of crimped hoses for the UPS-2 press: DN 20 (internal diameter range of EC ferrules: 30 ÷ 34 mm), DN 25 (internal diameter range of EC ferrules: 32 ÷ 38 mm). An additional base with the index EC-100250 can be purchased for the press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand crimper TNT250/P (six-jaw crimping) with manual hydraulic pump MPT100. The crimper head allows for passing through the hose, which is important when crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case. The specified crimping force at 700 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand crimping tool TNT8 (eight-jaw crimp) with manual hydraulic pump. The crimping head allows it to be passed through the hose, which is important for crimping angled fittings. The set includes: 6 sets of jaws for standard hoses and reduced outer diameter hoses 5/16", 5/16" ÷ 13/32", 1/2", 13/32", 1/2" ÷ 5/8", and 5/8", carrying case. The specified crimping force at 200 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Giant system strap clamps. Heavy-duty clamps (for hoses with large diameters - over 150 mm). Clamps with so-called "noses" secure the end of the strap after bending. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN quick-coupling socket cap, series 115, 116, 117 and 125 protecting against dirt and damage. Material: PVC. Available in colors: red, black or blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap GROMELLE H series-5000, protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA dust-tight socket cap of a quick coupling ISO-B protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap screw-together with a chain, W-6000 series, protecting against dirt and damage. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap screw-together, type WSC, protecting against dirt and damage. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA dust-tight socket cap of a quick coupling TEMA protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap HQ HPA series. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling socket with chain to protect against contamination and damage. Material: chrome-plated brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ANFOR lever connector. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for LAUX 42 lever connector. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap socket (plug) SKV, as an element closing, for use in hydraulic systems. Material: steel galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNOR blind cap with chain intended for symmetrical connections of the STORZ type designed according to the Norwegian national standard. Material: bronze. Sealing: NBR. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap (plug) ORFS with UNF male thread, type ROV. Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap a cover quick coupling (for socket and plug) protecting against contamination and damage mechanical, for series 1100 and 1100N. thanks to use caps (covers), increases service life quick coupling. Material: high-strength plastic, PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap a cover quick coupling (for socket and plug) protecting against contamination and damage mechanical, for series 1300 and 1300N. thanks to use caps (covers), increases service life quick coupling. Material: high-strength plastic, PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap a cover quick coupling for socket and plug, protecting against contamination and damage mechanical, for series 1800 and 1800N. thanks to use caps (covers), increases service life quick coupling. Material: high-strength plastic, PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap Brass for a nut. Range of external pipe diameters from 4 to 22 mm. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ blind cap, equipped with a drain valve without a chain, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. With a symmetrical design of the connection part, it easily connects with each other. Elements with the same coupling spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal plug with external NPT thread, type 108H, for threaded couplings intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA dust-tight socket cap of a quick coupling TEMA protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket cap or plug screw-together quick coupling, type PVV3, protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: polypropylene. Color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap DIN 2353 Eaton Walterscheid™, type VKA: 24° cone DIN 2353 with an O-ring NBR. Compatible with nut DIN 2353 type M. Available as: LL (extra-light series), L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap plug-in (plug) with a nut lock SKV, as an element closing, for use in hydraulic systems. Material: steel galvanized. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap plug-in for socket systemu STECKO. Material: free-cutting steel, galvanized. sealing: NBR (O-ring), teflon (ring oporowy).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN quick-coupling plug cap, series 115, 116, 117 and 125 protecting against dirt and damage. Material: PVC. Available in colors: red, black or blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap for a PD quick coupling plug, standard ISO 15171-1. Material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling water NiTO 1". Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap GROMELLE H series-5000, protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap ISO-A protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: PVC. Color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA dust-tight plug cap of a quick coupling ISO-B protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together with a chain, W-6000 series, protecting against dirt and damage. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together, type WSC, protecting against dirt and damage. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap screw-together with a chain, type TC, protecting against dirt and damage. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA dust-tight plug cap of a quick coupling TEMA protecting the couplings against dirt, which could result in damage to components and the ingress of contaminants into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug cap HQ HPA series. Material: carbon steel, galvanized.
