Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V with lock, SKILLAIR® series, without end plates. Its purpose is to separate the working circuit from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. In the resting position (closed), it can be locked with a padlock, which secures the valve from being activated by unauthorized personnel. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Nominal flow: depending on size up to 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection set (EN 1092), type SZ2. Included: screws DIN 933 - 4 pieces, nuts - 4 pieces, and washers - 4 pieces. Mechanical property class: A2-70 - screws; A2-70 - nuts. Selection of screws and nuts for flanges according to the table in the attachment. Material: AISI 304 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with hose end designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Material: stainless steel. Working pressure: 16 bar. Seal: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle fitting JIC 37° with external UNF thread (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® for inch tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external BSP thread (seal on internal 60° cone) and external NPT thread (seal on thread) allowing the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A202 with external BSP thread (60° cone sealing) and external NPT thread (thread sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe precise filter DEP series SYNTESI®, without end connections, is used to remove liquid or solid contaminants from compressed air with high accuracy. High filtration accuracy is achieved by using a special filtering element called a "coalescing cartridge." Size: SY1, SY2. Filtration degree: 0.01 µm - air purity class according to ISO 8573-1: 1-7-2. Supply pressure: up to 15 bar - size SY1, up to 13 bar - size SY2. Operating temperature: from -10°C to +50°C. Condensate drain: manual / semi-automatic (RMSA). Recommended flow: 460 l/min - size SY1, 620 l/min - size SY2 (at a pressure of 6.3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end BURGACLIP with internal UNF thread, for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 45° crimp fitting for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsJIC 37° plug with external UNF thread (sealing on the external 37° cone). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK coupling chain. Length: 300 mm. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° fitting type LET-LOK® with external BSPT thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure of the fitting is determined based on the specific size and type of threaded connection (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° Tee KTSB 45 designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped plug coupling "T" with a fitting, type R48, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLip seal designed for suction and pressure hoses. For food applications (for contact with drinking water - indices marked with the digit "05" at the end). Material: white NBR rubber. Operating temperature: from -40°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAND logic element. Control by compressed air, reset by compressed air. Mounting in any position. Material: body - plastic, spindle - aluminum, sealing - NBR. Nominal flow: 100 Nl/min at 6 bar with a pressure drop of 1 bar. Built-in plug couplings for 4 mm tubing. Operating temperature: from -10°C to +60°C. Working pressure: 0 to 8 bar. Control pressure: 1.5 to 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure nipple type A202, with external BSP thread (60° cone seal) and external NPT thread (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread adapter (sealed with a metal-rubber gasket) enabling the connection of quick couplings and UHP hoses to each other, as well as connecting them to UHP connection blocks. Material: black galvanized steel. Working pressure: 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter FIL series BIT recommended for decentralized compressed air systems or in direct proximity to actuators. Size: 1/8", 1/4". Filtration degree: 5 µm, 20 µm, 50 µm. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 1200 l/min - 1/8", 1/4" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInch ring set (front + rear) for use in LET-LOK® type couplings. Quantity: 10 pieces. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO side crimp fitting 15° for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut intended for connection with JIC37° fitting to seamless precision hydraulic tube. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSide plug coupling with external thread, type R45, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for CAMLOCK AU and DU connections designed to seal the internal thread connection with the external cylindrical thread. Material: PTFE. Operating temperature: from -20°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and thick suction-discharge hose designed for the transport of bulk abrasive substances such as powders, cement, granules, abrasives, etc. Externally corrugated, internally smooth. The inner layer is made of abrasion-resistant polyurethane. It features good resistance to external impacts and harsh operating conditions. Resistant to UV radiation and low temperatures. The hose has a copper wire covered with polyurethane arranged alongside the spiral, which, when grounded (or connected to a grounded end), dissipates electric charges. Used in industrial installations, for handling, in construction, and in shipbuilding. Inner layer: blue polyurethane. Reinforcement: hard PVC spiral. Hose material: gray and purple PVC. Working pressure: from 5 bar to 6 bar - depending on the hose diameter and temperature. Vacuum: up to 0.9 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details3/2 shut-off valve used as a switching and venting valve for the pneumatic system. When the control sleeve is moved back, the pneumatic system is vented, and when the sleeve is moved forward, the pneumatic system is pressurized. Working pressure: 10 bar. Operating temperature: from -10°C to +80°C. Body material: chrome-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with a hose end for RS clamp intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A115C compact with internal BSP threads (60° cone sealing). Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP tube end with internal UNF thread, for hose type 3090 for air conditioning. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable clamp with lever for groove connection without gasket and safety pin. Material: carbon steel. Working pressure: 85 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° elbow fitting JIC 37° with external NPT thread (seal on the thread – with Teflon tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo connection bolt, designed for securing brake lines. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-F "flat-face" type IF non-drip quick coupling socket with internal BSP thread. Designed primarily for construction machinery where significant pressure fluctuations occur. The zinc-nickel coating provides several times greater corrosion resistance than a zinc coating. The socket features a safety pin to prevent accidental disconnection. Interchangeable with ISO-F quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil). Material: steel with zinc-nickel coating. Sealing: NBR (operating temperature from -25°C to +100°C); viton (operating temperature from -15°C to +200°C). Working pressure: up to 400 bar (depending on the size of the quick coupling). Flow has been specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for UHP adapters with external thread. Working pressure: from 2000 bar to 3000 bar (depending on thread size). Material: carbon steel, black galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V series SYNTESI®, without end connections, is used to separate the working system from the supply air. It is a three-way, two-position, normally closed valve. In the closed position, it cuts off the supply air and vents the system, making it particularly useful for maintenance work. It has a system allowing for the installation of two padlocks of size SY1 or three padlocks of size SY2 with a diameter of 3 mm. Alternatively, a version with a Ø 7 hole for a single padlock is available. On the rear and front surfaces of the valve, there are auxiliary connections (1/8” for size SY1 and 1/4” for size SY2) for connecting a pressure gauge, pressure sensor, or for additional air intake. Size: SY1, SY2. Connection: BSP thread 1/8", 1/4", at the front and rear. Supply pressure: up to 15 bar, depending on size. Operating temperature: from -10°C to +50°C. Nominal flow: up to 4000 l/min, depending on size (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, with a front lever and roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ swivel coupling with internal BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Symmetrical design of the connection part allows for easy coupling. Elements with the same coupling spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector with external conical thread, type R39C, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCylindrical filter with round openings with BSPT thread for use with hoses for drawing water, sewage, emptying tanks, etc. Material: carbon steel, galvanized.
