Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure two-way ball valve designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Pneumatic actuated valves available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar, respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass option is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (PCTFE, PEEK option). Working pressure (dependent on temperature/seal material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on seal material - see chart): from -34°C to +210°C (modified PTFE). Connection: inch LET-LOK®. NOTES! Ball valves are designed to operate in either fully open or fully closed positions. The valves have factory-adjusted packing seals for a pressure of 70 bar. Due to varying operating conditions, periodic adjustment of the packing seal may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure two-way ball valve designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Pneumatic actuated valves available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (option PCTFE, PEEK). Working pressure (dependent on temperature/seal material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on seal material - see chart): from -34°C to +210°C (modified PTFE). Connection: metric LET-LOK®. NOTES! Ball valves are designed to operate in either fully open or fully closed positions. Valves have factory-adjusted packing seal for 70 bar pressure. Due to varying operating conditions, periodic adjustment of the seal may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure three-way ball valve with bottom entry (switching only, no shut-off) designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity, great durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Available valves with pneumatic actuation. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar, respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (options PCTFE, PEEK). Working pressure (dependent on temperature/sealing material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on sealing material - see chart): from -34°C to +210°C (modified PTFE). Connection: GW NPT. NOTES! Ball valves are designed to operate in a fully open or fully closed position. Valves have factory-adjusted packing sealing for a pressure of 70 bar. Due to varying operating conditions, periodic adjustment of the sealing may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure three-way ball valve with bottom inlet (switching only, no shut-off) designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity, great durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Available valves with pneumatic actuation. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar, respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (PCTFE, PEEK option). Working pressure (dependent on temperature/sealing material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on sealing material - see chart): from -34°C to +210°C (modified PTFE). Connection: inch LET-LOK®. NOTES! Ball valves are designed to operate in either fully open or fully closed positions. The valves have factory-adjusted packing sealing for a pressure of 70 bar. Due to varying operating conditions, periodic adjustment of the sealing may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure three-way ball valve with bottom inlet (switching only, no shut-off) designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity, great durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Available valves with pneumatic actuation. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar, respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (option PCTFE, PEEK). Working pressure (dependent on temperature/sealing material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on sealing material - see chart): from -34°C to +210°C (modified PTFE). Connection: metric LET-LOK®. NOTES! Ball valves are designed to operate in fully open or fully closed positions. Valves have factory-adjusted packing sealing for a pressure of 70 bar. Due to varying operating conditions, periodic adjustment of the sealing may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4420 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED Directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: GZ BSPT. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4424 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: GZ BSPT. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft start valve, used for the safe introduction of air into the pneumatic system, protecting actuators from sudden pressure increases. In the version with electric control, without pilot pressure, air flows from the inlet connection to the outlet through a needle valve. Upon receiving an external control signal, electrical, the valve is overridden and air flows through the full cross-section of the valve. The valve does not vent the pneumatic system. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft start valve, used for the safe introduction of air into the pneumatic system, protecting actuators from sudden pressure increases. STD valve: opens automatically when the outlet pressure reaches approximately 50% of the inlet pressure. Pneumatic control valve: without pilot pressure, air flows from the inlet connection to the outlet through a needle valve. Upon receiving an external control signal, pneumatic, the valve is overridden and air flows through the full cross-section of the valve. The valve does not vent the pneumatic system. Size: 100. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Flow: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass needle valve with manometer connection, used in hydraulic systems as an isolating element for the manometer from the installation. The valve protects the manometer from overload and pressure spikes during opening and allows for its replacement. It is available in two versions: straight – in-line (FPE) and angular 90° (FPEA). It has a thread under the knob, allowing for panel mounting. An adapter with index DC-FPE-FPEA must be used for the valve, tightened to the connection with internal thread (ordered separately). Material: nickel-plated brass (body), carbon steel (needle), galvanized steel (connection - nut), plastic (knob). Sealing: NBR. Connection: 2 x 1/4" BSP female (manometric). Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple, monostable foot valve without protective cover with ports in the front plane. This type of valve is used for foot control by the operator of devices in pneumatic systems. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 95 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V, NEW DEAL series, separates the working system from the supply air. It features a triple locking mechanism, and the valve opens by pressing a button. The mushroom system used ensures high flow rates. Connection: GW BSP 1/4" to 1/2". Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Nominal flow: 1500 l/min for 1/4" connection, 2900 l/min for 3/8" and 1/2" connections (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric shut-off valve V3V, SKILLAIR® series, with end plates, is used to separate the working system from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Connection: GW BSP 1/4" to 3/8". Flow rate: 1650 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angular shut-off valve with external BSP thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The shut-off valve is closed by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Padlock version, protects against unauthorized opening. Supplied with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with both ends equipped with plug-in couplings (hose to hose). Lockable version, protects against unauthorized access. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a threaded connection with an O-ring on one side and a plug-in connection on the other side (thread - hose). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe inline shut-off valve with BSP external thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The closure of the shut-off valve is achieved by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V with lock, SKILLAIR® series, with end plates. Its purpose is to separate the working system from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. In the resting position (closed), it can be locked with a padlock, which secures the valve against activation by unauthorized persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Nominal flow: depending on size up to 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread), discharge conducted through the plug connection. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick exhaust valve with VSRR L throttling adjustment version with a plug-in connection on one side and a threaded connection with an O-ring on the other side (hose - thread), with the ability to adjust the exhaust air flow, allowing for increased actuator speed. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread), silenced discharge using an integrated silencer. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPrecision pressure reducing valve series GS with quick venting, designed to maintain a set pressure at a constant level and to quickly discharge any excess pressure from the pneumatic system. Intended for applications requiring high accuracy, e.g., for use with actuators with a reduced friction coefficient typically used as pneumatic springs with a constant characteristic. High flow through the valve during aeration and venting of the system and high setting precision are ensured by two identical and opposing regulating valves, separate for the supply and outlet connections. Installation in the system is done using mounting brackets or directly, using mounting holes located in the valve body. Output pressure range: 0÷2, 0÷4, 0÷8 bar. Supply pressure: up to 10 bar. Working medium: filtered 10 µm compressed air, non-oiled. Drain valve sensitivity: 30 mbar. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" and 1/4". Additional connection for pressure gauge: BSP 1/8". Flow: 1200 l/min - 1/8", 1380 l/min - 1/4" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPiston-type pressure reducing valve RP, characterized by resistance to harsh working conditions, remotely controlled by external pressure (pilot), intended for the NEW DEAL series. Possibility of wall mounting using holes in the body. Size: 3/8", 1/2". Output pressure range: dependent on the pilot controlling the reducer. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: BSP female thread 3/8", 1/2". Pressure gauge connection: BSP female thread 1/8". Flow rate: 4500 l/min (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure piston-type pressure reducing valve with manometer, used for regulating working pressure and ensuring proper operation in the connected installation, regardless of changing medium consumption. Size: DN12. Housing material: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: from -10°C to +90°C. Connection: BSP 1/4", 3/8". Manometer dial diameter: Ø63. Flow rate: 2000 l/min - 1/4", 2500 l/min - 3/8" (at input pressure 20 bar Δp = 4 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, without end plates, is used for regulating operating pressure, ensuring proper device operation. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Flow rate: 1600 l/min - series 100, 3500 l/min - series 200, 7000 l/min - series 300 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulating valve with lock REG type piston, characterized by resistance to harsh working conditions, intended for the NEW DEAL series. Possibility of wall mounting using holes in the body. It has a stem with a hole located in the upper part of the adjusting knob. When the knob is in the locked position, there is an option to place a padlock in the hole, preventing changes to the reducer settings. The set includes a padlock and 2 keys. Size: 3/8", 1/2". Output pressure range: 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: GW BSP 3/8", 1/2". Pressure gauge connection: GW BSP 1/8". Flow: 2500 l/min (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulating valve in cartridge version for direct installation in the device or for block mounting with common supply and various settings of output air pressure. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeries REG pressure reducing valve, SYNTESI® series, without end connections, is used to regulate working pressure and maintain it at a constant level, ensuring proper operation in the connected installation, regardless of the changing consumption of the medium. The valve uses a shaped diaphragm instead of a flat diaphragm, which provides higher nominal flow values due to a greater diaphragm stroke, as well as greater sensitivity and response speed to changes in settings, by reducing static and kinetic friction of components and increasing accuracy in maintaining the set output pressure with changes in flow and supply pressure values. The "push-lock" mechanism allows the knob to be locked in any position by pressing it. The locking plate enables the installation of a padlock to prevent unauthorized changes to the output pressure setting. They are designed to draw air from connections at the front and back of the body, which can be used to connect a pressure gauge, pneumatic-electric relay, or plug couplings, with direct connection of input and output connections. This allows for the installation of any number of pressure reducing valves next to each other, supplied from a single source, independently adjustable. Size: SY1, SY2. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: from -10°C to +50°C. Additional connection for pressure gauge or couplings: BSP 1/8" for size SY1, BSP 1/4" for size SY2. Flow: 500 l/min - size SY1, 1000 l/min - size SY2 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMG4000 pressure regulating valve with a knob for use in car washes. It features precise pressure regulation. Made of brass, with a ball and ball seat made of stainless steel. The regulator has an inlet of 2 x 3/8" BSP (1 bypass) and an outlet of 3/8" BSP. The regulator is also equipped with a pressure gauge connection of 1/4" BSP. Working pressure: 280 bar. Nominal flow: 40 l/min. Operating temperature: +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), with a control coil, for panel mounting. Panel mounting reduces the number of necessary wires, dampers, and connections, which lowers costs and increases reliability. This is an ideal solution wherever there is a need to replace the valve without the possibility of disconnecting the wires. The inlet, outlet, and vent are located on the connection plate. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with pivot roller, most commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal directional control valve with mechanical actuation, lever with pivot roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal dividing valve with mechanical control, lever with roller assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
