Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with a push rod assist, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with actuator assistance, commonly used for controlling the operation of actuators. It can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve, operated by a selector, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve, operated by a selector, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVS30 valves are used in hydraulic systems as a component to establish the supply sequence of several actuators connected to a single power source. In a system with two actuators, the valve is installed between the power source (1) and the actuator (2) that is to be supplied second. The opening pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). The valves are equipped with mounting holes. Special attention should be paid not to set the pressure value higher than 260 bar (maximum operating pressure for the aluminum body). Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angled drain valve with external BSP thread is used to release air, for example, to equalize pressure in the system. It can also be used to remove condensate from it. Compressed air may contain water vapor, which upon condensation turns into a mixture of water and oil called condensate. If not removed, it can cause failures in both the system components and the compressed air receivers. Mounting position - any. Body material: brass. Disc material: brass. Sealing: NBR. Operating temperature: from 0°C to +90°C. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight drain valve with metal-metal sealing and BSP external thread is used to release air, for example, to equalize pressure in the system. It can also be used to remove condensate from it. Compressed air may contain water vapor, which upon condensation turns into a mixture of water and oil called condensate. If not removed, it can cause failures in both system components and compressed air receivers. Mounting position - any. Body material: nickel-plated brass. Disc material: brass. Sealing: NBR. Operating temperature: from 0°C to +90°C. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCut-off valve type STP L 2/2 unidirectional in the version with threaded connection with an O-ring on one side and a plug-in connection on the other side (thread - hose) intended for direct installation in the supply connection of the actuator (according to the flow direction indicated by an arrow on the valve body). A properly connected STP L valve allows for free flow of supply air to the working chamber of the actuator, while preventing its venting without applying control pressure to the plug-in connection Ø4 (Ø5/32”). Operating pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual valve allowing for the release of excess oil in the system back to the tank and reducing the accumulated oil pressure in the system with the valve. Installed between the part of the system equipped with quick couplings and the pressure supply part. After releasing the excess hydraulic oil, the connection of the quick couplings becomes possible. Material: galvanized steel (body), brass (valve). Sealing: NBR. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMFP valve protecting the hydraulic system from oil loss in the event of sudden leakage of the installation (e.g., hose rupture). During normal operation of the system, the valve allows oil flow in both directions. In the event of a sudden increase in flow (e.g., hose rupture), the valve closes the oil flow in one direction. Permissible flow direction: A → A1 (free), A1 → A (valve). Material: carbon steel, galvanized (body), hardened steel (valve). Sealing: metal-metal. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEffective shut-off valve compatible with all pneumatic installations with standard compressed air consumption, designed to protect the operator and the pneumatic installation in case of damage (e.g., pipe rupture or hose burst). Meets the requirements: EN 983 § 5.3.4.3.2, EN 4414 §5.4.5.11.1, ATEX Group II Category II, TÜV 01-02-0145, TÜV AZ 77318 2. The valve should be selected considering: flow rate, length and diameter of the hose, as well as the internal diameters of the installation components. For questions or concerns, please contact Tubes International. Connection: GZ BSP or GW BSP (inlet) / GW BSP (outlet). Body material: aluminum. Piston material: POM (1/4" ÷ 1/2"), aluminum (3/4"). Spring material: stainless steel. Sealing: NBR. Minimum pressure: 4 bar. Working pressure: 18 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR L type check valve in a version with a threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose), with holes for wall mounting. Working pressure: 12 bar. Sealing: NBR. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR L type check valve in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread), with holes for wall mounting. Working pressure: 12 bar. Sealing: NBR. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCheck valve (hydraulic lock) type VRDE used in hydraulic systems as a safety element against unintentional movement of double-acting actuators (retraction / extension of the piston rod). Connections C1, C2 (from the actuator side) are equipped with locking rings and nuts according to DIN 2353. Permissible flow direction: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). The valve is equipped with a mounting hole. Material: galvanized steel (body), hardened steel (piston). Sealing: NBR. Opening pressure: 3 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeries REG pressure reducing valves, SKILLAIR® series, without end plates, are used for regulating working pressure, ensuring proper operation of devices. They can be installed in series and supplied with the same pressure. Each valve can have a different output pressure setting, independent of the settings of other valves. The output air is taken from the pressure gauge connection (1/8”). Size: 100. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Pressure gauge connection: GW BSP 1/8". Flow rate: 950 l/min (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeries REG pressure reducing valves, SKILLAIR® series, with end plates, are used to regulate working pressure, ensuring the proper operation of devices. They can be installed in series and supplied with the same pressure. Each valve can have a different output pressure setting, independent of the settings of other valves. The output air is taken from the pressure gauge connection (1/8”). Size: 100. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Connection: BSP 1/4" or 3/8". Pressure gauge connection: BSP 1/8". Flow: 950 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTank with a capacity of 1L for cleaning and foaming agent, with an injector and foam nozzle, with a quick coupling for connection to the multifunctional gun AKBO MNAP2-BL.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning agent tank for the NiTO Clean set. Available in various colors (green, blue, red, and yellow) for easier identification of the used agent. Capacity: 1.4 liters.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe electric bumper for the P20 MSN press is one of the control options for the clamping press. Clamping occurs after pressing the hose with the coupling against the bumper located behind the press head.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet F + D series SKILLAIR® with a high degree of reliability consists of a filter and a fine air filter. The purpose of the set is to purify the air supplied by the compressor and to remove with high accuracy liquid and solid contaminants contained in the compressed air. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: filter - 5 µm, fine filter - 99.97% at 0.01 µm. Connection: GW BSP 1/4" to 1". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe F + L set of the SKILLAIR® series with a high degree of reliability consists of an air filter and a lubricator. The purpose of the set is to purify the air supplied by the compressor and to lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Connection: BSP 1/4" to 1". Condensate discharge: manual/semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 1200 to 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompressed air preparation unit F + L, designed for the BIT series. It is a compact unit consisting of a filter with various filtration stages and a lubricator with high oiling stability. Advantages of the set: 1) High degree of condensate separation. 2) Manual/semi-automatic or automatic condensate drain. 3) Oiling at low flow rates. Size: 1/8", 1/4". Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: BSP 1/8", 1/4". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC). Flow: 600 l/min - 1/4" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe compressed air preparation unit F + L, designed for the NEW DEAL series, consists of a filter with various filtration stages and a lubricant with high dosing stability. Key advantages: 1) Metal tank with external condensate level viewing. 2) Manual/semi-automatic or automatic condensate drain. 3) Micrometric oil dosing adjustment. 4) Guaranteed operation at low flow rates. Size: 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow: 1000 l/min - 1/4", 3500 l/min - 3/8", 1/2", 9500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FR + L set of the SKILLAIR® series with a high degree of reliability consists of an air filter, a pressure reducing valve, and a lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain the set pressure stably during fluctuations in supply pressure, and lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Output pressure range: 0÷8, 0÷12 bar. Connection: GW BSP 1/4" ÷ 1". Condensate discharge: manual/semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FRL set series SKILLAIR® with a high degree of reliability consists of an air filter, a pressure reducing valve, and a lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain a stable set pressure amidst fluctuations in supply pressure, and lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Output pressure range: 0÷8, 0÷12 bar. Connection: GW BSP 1/4" ÷ 1". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFRL compressed air preparation unit with a high-reliability piston-type regulator, designed for the NEW DEAL series, characterized by resistance to harsh working conditions. Key advantages: 1) Stability of set pressure with variable supply pressure. 2) Metal tank with external condensate level viewing. 3) Oil dosing proportional to air flow. 4) Micrometric adjustment of oil dosing. 5) Guaranteed operation at low flow rates. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Filtration degree: 4 µm, 20 µm, 50 µm. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Pressure gauge connection: BSP female thread 1/8" for valve up to 1/2", above - BSP female thread 1/4". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow: 400 l/min - 1/4", 2000 l/min - 3/8", 1/2", 3600 l/min - 3/4", 3700 l/min - 1" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete mini-FRL unit series BIT with shaped membrane. Characterized by high flow rate with reduced pressure drop, high degree of condensate separation, oil dosing proportional to air flow, capability to operate at low flow values. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Output pressure ranges: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration degree: 5 µm, 20 µm, 50 µm. Connection: BSP 1/8", 1/4". Pressure gauge connection: BSP 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow: 280 l/min (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VFR + L series SKILLAIR® set with a high degree of reliability consists of a shut-off valve, air filter, pressure reducing valve, and lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain a stable set pressure during fluctuations in supply pressure, and lubricate with an oil mist. The function of the shut-off valve is to separate the working system from the supply air, which occurs in the closed position, simultaneously venting the system. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on the size. Output pressure range: 0÷8, 0÷12 bar. Filtration degree: 20 µm. Connection: BSP 1/4" to 1". Condensate drain: manual / semi-automatic (RMSA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on the size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe set is equipped with miniature measuring quick couplings DN1.2 manufactured in Sweden, designed for measuring static, dynamic pressure, and vacuum in hydraulic systems. Based on a classic "push to connect" quick coupling design with a locking mechanism consisting of balls, a spring, and a locking sleeve. The socket and plug are equipped with valves ensuring leak-free connection and disconnection and tightness, even at a vacuum of 90%. Measuring plugs made of hardened steel, durable and maintenance-free. Connections with external threads sealed using an O-ring recessed in the front surface (type A) or an O-ring at the front surface (type B). This ensures simple and quick configuration of connections. The remaining elements of the measuring set include manometers (not included in the set) mounted in measuring holders, adapters, and measuring hoses. The vent valve in the measuring holder allows for the removal of air bubbles from the system, which increases the accuracy of dynamic pressure measurement. The set can be used for pressure measurements on machines equipped with TEMA SYSTEM 100 measuring plugs (some working machines e.g., VOLVO, HIAB, SAMSUNG) or by installing plugs in the system during measurement. The flexible adapter TA-M-139 allows the set to be used for measurements on widely used connections with M16x2 threads. Any suitable type of manometer (not included in the set) with a typical manometric connection with a 1/4” BSP external thread can be used for measurements with the set. Recommended manometer version: 63 mm manometer type FM-631 - bottom connection. Sealing of the manometer in the holder socket using a thread washer and an O-ring 10.8x2.2, or a manometric washer inside the socket. The set is delivered in a plastic case and includes the following elements: 1. Measuring holder for low-pressure connection (manometer connection 1/4” BSP, quick coupling socket, vent). 2. Measuring plug, GZ 1/8" BSP, type A, plastic cap. 3. Measuring hose (DN2, 630 bar), L=2.5 m with quick coupling plug TA-M-120 and socket TA-M-150. 4. Adapter, GW 1/4" BSP / GZ 1/8" BSP, type A. 5. Adapter, GW 1/8" BSP / GZ 1/4" BSP, type B. Sealing: NBR rubber. Working pressure: up to 600 bar, for plugs TA-M-120 - 400 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of outlet nozzles for NITO II gun. Nozzles 20, 30, and 60 l/min (5 bar), made of brass. 3 mm hex key for nozzle installation. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of nozzles (suction attachments) for a suction gun (long and wide crevice). Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of high-strength 1/2" socket wrenches in sizes 17, 19, and 21 mm, coated with plastic. Available in various colors for easy size identification. Entirely enclosed in a convenient plastic case. Compatible with pneumatic wrench EW-741160.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe basic measurement set is intended for the diagnostics of hydraulic and pneumatic systems through the measurement of static, dynamic, and vacuum pressure. The set includes a plastic case with designated spaces for two 63 mm pressure gauges and a DN2 (630 bar) hose with fittings: measuring GW M16x2 and for the gauge GW 1/4” BSP, with a length of 2000 mm. The set does not include pressure gauges, which must be selected and ordered separately. Material of the hose fittings: steel with a zinc-nickel coating. Working pressure: up to 630 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe measurement set is designed for the diagnostics of hydraulic and pneumatic systems through the measurement of static, dynamic, and vacuum pressure. The set includes a plastic case with designated spaces for two 63 mm pressure gauges, a DN2 hose (630 bar) with two measuring ends GW M16x2, 2000 mm in length, as well as couplings and adapters: 1. M16x2 measuring coupling with a metal cap, with GZ 1/4” BSP, type E - 2 pcs. 2. M16x2 measuring coupling with a metal cap, with GZ M8x1, type F - 1 pc. 3. M16x2 measuring coupling with a metal cap, with GZ M10x1, type F - 1 pc. 4. Connection with GW 1/4” BSP to the pressure gauge, partitioned, with GZ M16x2 - 2 pcs. 5. Connection with GW 1/4” BSP to the pressure gauge, with GW M16x2 - 1 pc. 6. Reducing adapter GZ 3/8” BSP / GW M10x1, type E - 1 pc. 7. Reducing adapter GZ 1/2” BSP / GW M10x1, type E - 1 pc. The set does not include pressure gauges, which must be selected and ordered separately. Material of couplings: steel with a zinc-nickel coating. Sealing: NBR. Working pressure: up to 630 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement set designed for diagnosing hydraulic systems through pressure measurement. The set is supplied in a plastic case with the following configuration: 1. Glycerin pressure gauge 63 mm, lower connection 1/4” BSP, 0 ÷ 100 bar, glycerin pressure gauge 63 mm, lower connection 1/4” BSP, 0 ÷ 250 bar, glycerin pressure gauge 63 mm, lower connection 1/4” BSP, 0 ÷ 400 bar. 2. Measurement connector M16x2 with plastic cap, with GZ 1/4” BSP, type E, measurement connector M16x2 with plastic cap, with GZ 3/8” BSP, type E. 3. Measurement connector M16x2 with plastic cap, with GZ 1/4” NPT, type C, measurement connector M16x2 with plastic cap, with GZ 3/8” NPT, type C. 4. Measurement connector M16x2 with plastic cap, with GZ M10x1, type F, measurement connector M16x2 with plastic cap, with GZ 7/16”-20 UNF, type F, measurement connector M16x2 with plastic cap, with GZ 9/16”-18 UNF, type F. 5. Measurement connector M16x2 with metal cap, with DIN 2353 connection with GW M18x1.5, 12L. 6. Metal cap M16x2. 7. Connection with GW 1/4” BSP to pressure gauge, with GW M16x2, connection with GW 1/2” BSP to pressure gauge, with GW M16x2. 9. Connection with GW 1/4” BSP to pressure gauge, partitioned, with GZ M16x2. 10. Hose DN2 (630 bar) with two measurement ends GW M16x2 L = 1 m, hose DN2 (630 bar) with two measurement ends GW M16x2 L = 2 m. Material of connectors: galvanized steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement set designed for diagnosing hydraulic systems through pressure measurement. The set is supplied in a plastic case with the following configuration: 1. Glycerin manometer 63 mm, lower connection 1/4” BSP, 0 ÷ 160 bar, glycerin manometer 63 mm, lower connection 1/4” BSP, 0 ÷ 315 bar. 2. Measurement connector M16x2 with plastic cap, with GZ 1/4” BSP, type E, measurement connector M16x2 with plastic cap, with GZ 3/8” BSP, type E. 3. Measurement connector M16x2 with plastic cap, with GZ 1/4” NPT, type C. 4. Measurement connector M16x2 with plastic cap, with GZ M10x1, type F. 6. Metal cap M16x2. 7. Connection with GW 1/4” BSP to manometer, with GW M16x2. 8. 90° angled connection with GW 1/4” BSP to manometer, with GZ M16x2. 10. Hose DN2 (630 bar) with two measurement ends GW M16x2 L = 1.5 m. Connector material: galvanized steel. Sealing: NBR.
