Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction-discharge hose made of PVC intended for water and sewage. Smooth inner wall, slightly corrugated on the outside. Good resistance to external impacts and harsher operating conditions. Flexible at low temperatures. Used in irrigation systems, tankers, and vacuum trucks, for sewer cleaning and septic tank emptying. Hose material: green PVC. Reinforcement: hard PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +55°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, lighter than rubber, suction and discharge hose designed for the transport of water, sewage, sludge, and dry bulk materials. Used in irrigation systems, loading and unloading of tankers, in industrial installations, etc. Maintains high flexibility at low ambient temperatures. The smooth inner and outer wall facilitates hose cleanliness and increases discharge efficiency by 20%. It is resistant to weather conditions and abrasion. The hose is also available in straight, non-curved sections of 3 to 6 m. Inner layer: black PVC. Reinforcement: polyester braid, galvanized steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with steel spiral reinforcement, intended for hot water mixed with antifreeze fluids. Used in cooling and heating systems, for pumps in engines and machines. It has vacuum resistance. Inner layer resistant to heat and cooling fluids. Outer layer resistant to heat and aging. Rubber mixture compliant with DIN 73411:79 standard. Inner layer: black EPDM rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 4 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized suction and discharge hose for water and sewage in sanitary installations on ships, motorboats, yachts, etc. Odorless hose that does not allow odors from sewage discharge to escape outside (5-year warranty). The outer layer is resistant to marine factors and weather conditions. It has resistance to vacuum. Compliant with EN ISO 8099 standard. A special version SANITARY STAR / 7 with a working pressure of 7 bar is available upon special order. Standard length: 60 m or 120 m. Inner layer: white synthetic rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: white synthetic rubber. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, strong suction and discharge hose designed for water and sewage. Externally corrugated, internally almost smooth. Good resistance to external damage and harsher operating conditions. Maintains high flexibility at low temperatures. Used in irrigation systems, industrial water installations, for emptying septic tanks, etc. A special version, ARIZONA EXTREME ELASTIC, is also available on special order, flexible at very low temperatures (down to -40°C). Hose material: gray and green PVC. Reinforcement: hard PVC spiral. Working pressure: from 1.5 bar to 7 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVacuum-resistant suction and discharge hose designed for cooling water in foundries, smelters, and all applications where rubber hoses operate close to a heat source. Glass fiber covering resistant to temperatures up to +530°C caused by thermal radiation. Used in cooling systems. Particularly recommended for water installations near metallurgical furnaces. Resistant to short-term exposure to splashes of molten hot metal. Standard length: 60 m or 120 m. Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: EPDM rubber / glass fiber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -40°C to +70°C, external up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternally corrugated flexible and strong suction and discharge hose for water and sewage. It is characterized by good resistance to external damage and harsh operating conditions, as well as resistance to UV radiation and low temperatures. Used in irrigation systems, tankers, for flushing sewers, and emptying septic tanks. Also used in industrial installations. Hose material: gray-purple PVC. Reinforcement: hard PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the hose diameter and temperature. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, lightweight, and strong suction-discharge hose designed for the transport of water, sewage, sludge, non-corrosive liquids, and natural fertilizers (manure). The inner layer is made of smooth synthetic rubber, resistant to sludge and sewage. The corrugated outer layer provides a small bending radius and is resistant to ozone, weather conditions, and aging. Intended for agricultural, construction, and industrial applications, used for emptying septic tanks, as a suction hose for water and sewage pumps, for drainage and irrigation, and for tankers. Can be used for air extraction, dust, and bulk materials. Installation – depending on the diameter and type of fittings using steel bands, clamps, brackets, or compression sleeves. Inner layer: black synthetic rubber (SBR). Reinforcement: synthetic cord, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: from -30°C to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose designed for sewage and water. Corrugated on the outside, nearly smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (it returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It remains flexible at low temperatures. The hose is commonly used for emptying septic tanks and portable toilets, in construction, tourist facilities, marinas, and airports. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76mm); 0.85 bar (for diameter 102mm). Operating temperature: from -40°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible suction and discharge hose designed for water-cooled exhaust systems of diesel engines in motorboats and yachts (free discharge of mixed exhaust gases and cooling water). Used in short sections between installation pipes. Inner layer resistant to exhaust gases. Outer layer resistant to fire and weather conditions. Has vacuum resistance. Compliant with Lloyds type certificate 99/00169 (E4), homologated by VTT according to Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: synthetic cord, steel spiral. Outer layer: black, corrugated synthetic rubber CR. Burst pressure: ≥ 2 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinks suction and discharge hose with a black corrugated outer layer, designed for the transmission of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bending radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. For a diameter of 90 mm available in 2 m sections with soft, spiral-free ends. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRectangular corrugated hose reinforced with a steel spiral, for hot water and antifreeze fluids, intended for automotive and industrial cooling systems. It has vacuum resistance. Inner layer resistant to heat and cooling fluids. Outer layer resistant to overheating, oil, and aging. Inner layer: black CR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: up to 4 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with magnetic base and valve for coolant supply - system 1/4". Components: 20 segments (L=300 mm), flat nozzle 1", valve with external thread 1/4" BSPT, and magnetic base with "tail" for 1/4" hose (end thread size 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose supplied as a ready-made pipe, in various lengths, with mounted fittings, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. The hose is used for emptying septic tanks and portable toilets, in construction, tourist facilities, marinas, and airports. Available lengths: from 10 m to 25 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose supplied as a ready-made pipe, with mounted fittings, clamp, and rope, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. Short sections of hose, 1 m in length with fittings, are used as protective hoses, resting on the edge of the channel opening, inside which a pressure cleaning hose or inspection hose with a camera is introduced. The clamp mounted on the fitting with an attached 7.5 m rope allows for maintaining the proper position of the protective hose. Length: 1 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar. Operating temperature: from -40°C to +60°C.
