Very flexible, lighter than rubber, suction and discharge hose designed for the transport of water, sewage, sludge, and dry bulk materials. Used in irrigation systems, loading and unloading of tankers, in industrial installations, etc. Maintains high flexibility at low ambient temperatures. The smooth inner and outer wall facilitates hose cleanliness and increases discharge efficiency by 20%. It is resistant to weather conditions and abrasion. The hose is also available in straight, non-curved sections of 3 to 6 m. Inner layer: black PVC. Reinforcement: polyester braid, galvanized steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +60°C.

Flexible, strong suction and discharge hose designed for water and sewage. Externally corrugated, internally almost smooth. Good resistance to external damage and harsher operating conditions. Maintains high flexibility at low temperatures. Used in irrigation systems, industrial water installations, for emptying septic tanks, etc. A special version, ARIZONA EXTREME ELASTIC, is also available on special order, flexible at very low temperatures (down to -40°C). Hose material: gray and green PVC. Reinforcement: hard PVC spiral. Working pressure: from 1.5 bar to 7 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +55°C.

Flexible, lightweight, and strong suction-discharge hose designed for the transport of water, sewage, sludge, non-corrosive liquids, and natural fertilizers (manure). The inner layer is made of smooth synthetic rubber, resistant to sludge and sewage. The corrugated outer layer provides a small bending radius and is resistant to ozone, weather conditions, and aging. Intended for agricultural, construction, and industrial applications, used for emptying septic tanks, as a suction hose for water and sewage pumps, for drainage and irrigation, and for tankers. Can be used for air extraction, dust, and bulk materials. Installation – depending on the diameter and type of fittings using steel bands, clamps, brackets, or compression sleeves. Inner layer: black synthetic rubber (SBR). Reinforcement: synthetic cord, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: from -30°C to +70°C.

Strong, flexible, resistant to kinks suction and discharge hose with a black corrugated outer layer, designed for the transmission of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bending radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. For a diameter of 90 mm available in 2 m sections with soft, spiral-free ends. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).

Strong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).

Flexible suction hose supplied as a ready-made pipe, in various lengths, with mounted fittings, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. The hose is used for emptying septic tanks and portable toilets, in construction, tourist facilities, marinas, and airports. Available lengths: from 10 m to 25 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: from -40°C to +60°C.