Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction and discharge hose made of a special oil-resistant PVC blend. Designed for the transfer of mineral oils and hydrocarbons as well as industrial water, wastewater, liquid fertilizers, and certain chemicals – particularly where enhanced PVC resistance to hydrocarbons is required. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). Can be used for some chemical products – diluted acids, bases, and alcohols. The hose maintains its flexibility even at negative working temperatures, and its lightweight and small bending radius ensure convenience and ease of handling. Reinforced with a hard PVC spiral, impact-resistant, providing very good vacuum resistance and preventing hose collapse. Smooth inner and outer surface. Resistant to UV radiation, ozone, weather conditions, and abrasion. Widely used in industry, agriculture, construction, and roadworks. As a hose reinforced with a hard PVC spiral (without a braid), it exhibits some elongation under pressure, which should be considered in applications, especially at temperatures above 40°C. Hose material: blue PVC. Reinforcement: white hard PVC spiral. Working pressure: from 2 bar to 5 bar - depending on the hose diameter. Working temperature: from -25°C to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, with a thick wall and thick spiral, flexible hose designed for vacuum extraction and transport of abrasive materials such as sand, gravel, and grain. Suitable for all types of industries, particularly used for loading and unloading silos, vehicles, and suction excavators, as well as transloading from tankers, etc. The thick wall and very dense reinforcing spiral provide high resistance to vacuum. Smooth on the inside, non-compressible, not overly flexible but elastic, even at low temperatures. Excellent abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. The wall thickness of the hose is measured between the spirals. Other diameters may be available upon special request. The ECO 2.0 and ECO 2.5 hoses, regardless of their thickness, differ in construction and consequently in parameters. The ECO 2.0, due to its dense spiral, has greater resistance to vacuum but is less flexible, while the ECO 2.5, with a larger spiral pitch, is more flexible and elastic, especially in larger diameters. The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials sourced from recycling clean waste from the production process, renewable energy, closed water cycles, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between spirals: 2.0 mm (ECO 2.0), 2.5 mm (ECO 2.5). Operating temperature: from -40°C to +100°C (temporarily up to +125°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, economical suction and discharge hose for universal applications. Smooth inside, slightly corrugated outside. Designed for water, light chemicals, sludges and wastewater, plant protection products, and other liquids (avoiding fats, oils, and hydrocarbons). Also suitable for air, vacuum transfer of dust, powders, light granules, and other mildly abrasive bulk materials. Abrasiveness and potential static electricity issues should be considered. Widely used in agriculture, horticulture, and domestic applications. Hose material: green transparent PVC. Reinforcement: white spiral made of rigid PVC. Vacuum at 20°C: 0.6 bar. Operating temperature: from -20°C to +60°C. As the operating temperature increases, the working vacuum value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, universal laboratory hose free of phthalates (DEHP). An excellent solution for complex laboratory equipment installations requiring small bend radii and multiple curves. This ultra-soft hose is resistant to twisting and kinking and remains flexible at low temperatures (down to -55°C). Due to its softness, it does not require high forces for compression, making it an ideal solution for peristaltic pumps with low torque or battery-powered. It has a longer lifespan in peristaltic pump applications compared to typical silicone hoses, while also possessing good chemical resistance to a range of corrosive media (acids, bases, salts, alcohols). Compliant with FDA requirements for food contact and REACH. Sterilization only with ethylene oxide. Full hose roll length: 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special, DEHP-free). Maximum operating temperature: +52°C. Brittleness temperature: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose for demanding, versatile applications in the food industry. Excellent for the transfer of various types of food products such as: olive oil, wine, beer, fruit juices, milk, fats, and alcohols with a concentration of up to 96%. The inner layer is odorless and tasteless. It does not contain phthalates and bisphenol A, as well as polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for heavy metals. The outer layer is resistant to weather conditions and ozone. Standards and requirements: Food industry, food contact 1935/2004/EC and EC 2023/2006/EC (GMP). The inner layer complies with FDA 21 CFR 177.2600, BfR XXI cat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible reinforced hose designed for higher pressures. Made of polyether - polyurethane, free of plasticizers, exceptionally resistant to abrasion and tearing, characterized by a small bending radius and flexibility even at low temperatures. Withstands cyclic temperature changes. Resistant to oils, greases, fuels, and a range of chemicals. Used in various industrial sectors: transfer of abrasive and viscous products, sludges and pastes, transfer of granules and powders, lubrication and degreasing, for cooling fluids in automotive applications, for air in pneumatics and industrial automation. Used in the food and cosmetic industries - meets FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 requirements for food contact and NSF-61 for use with drinking water (with hose length limitations depending on diameter). Full hose roll length 30 m (from internal diameter 31.8 mm - 15 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: tygothane® - polyurethane - polyether (PU). Operating temperature: from -73°C to +82°C. Brittleness temperature: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, high-quality flexible hose made of fluorine rubber, resistant to solvents, fuels, oils, aggressive chemicals, also under elevated temperature conditions. Used for cleaning solvents (dry cleaning, solvent recovery systems), aggressive chemicals, acids and bases, hot oils and fuels. Suitable for peristaltic pumps. Resistant to ozone, sunlight, and weather conditions. The opaque black wall of the hose completely protects light-sensitive substances. The production process of the hose with post-vulcanization heating removes any residues and ensures minimal outgassing, required in vacuum and space applications. Full roll length of the hose is 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: fluoroelastomer (FKM). Maximum operating temperature: +204°C. Brittleness temperature: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically and thermally resistant two-layer hose designed for the discharge and transfer of the most chemically aggressive vapors, gases, dust, and fibers (non-abrasive), as well as for the blowing of hot air. Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, and aging. Used in the chemical, petrochemical, and food industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material internal layer: white PTFE film - standard version HYTEF, black conductive PTFE film - antistatic version HYTEF EL. Hose material external layer: black polyethylene fabric coated with CSM rubber. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -35°C to +175°C (temporarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant hose designed for the extraction and transfer of aggressive chemical vapors from solvents, paints, hydrocarbons, chemicals, etc. Thanks to the conductive FKM rubber, it has antistatic properties (surface resistance R <106 Ω). Very good resistance to oil, aromatic substances, most acids, and chemicals. Excellent resistance to elevated temperatures. Resistant to UV radiation and ozone. Characterized by high compressibility - up to 1:6, strong construction resistant to vibrations and stretching, impact resistance due to the external spiral. Used in the paint, chemical, and paper industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for FKM (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: polyester fabric coated with FKM, antistatic, externally black. Reinforcement: external spiral made of steel sheet and wire. Operating temperature: from -25°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight and with excellent flexibility, the hose is designed for the discharge of oil vapors, dust, and light bulk materials. Resistant to microorganisms and hydrolysis. Compliant with FDA requirements and European Directives. Hose material: transparent polyether-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose designed for suction and transport of abrasive materials: sand, gravel, debris, leaves, and other contaminants. Intended for use in street, square, and road cleaning. Used in sweepers and other municipal and road service equipment. The special design of the P7 M STREET hose ensures that despite its large wall thickness (1.4 mm), it has a smaller bending radius (1.2 x D) than standard hoses of this thickness. The folds of the hose between the spiral at the bend turn outward, reducing flow resistance and wear. Flexible, low-compressible, smooth inside, and elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Wall thickness is measured between the spiral. Installation on fittings with bridge clamps (right-handed). Other diameters may be available upon special request. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose made according to platinum-enhanced technology. Steam sterilization (max. +135°C at 3.5 bar pressure for 30 min.). The inner layer meets FDA, USP Class VI, D.M. 21/03/73, and EU Regulation No. 10/2011 requirements. The outer layer meets USP Class VI, FDA, and European Pharmacopoeia standards. Hose compliant with EC 1935/2004 and 2023/2006/EC (GMP). Free from animal-derived substances, phthalates, adipates, and materials subject to restrictions of Directive EC 1907/2006 (REACH). Safety factor 3:1. The specified bend radius applies to static pressure. Working pressure (20°C): from 4 bar to 10 bar, depending on hose diameter. Inner layer: white smooth fluoropolymer PFA. Dynamic. Reinforcement: polyester braiding, AISI 302 steel spiral. Outer layer: transparent silicone. Operating temperature: from -30°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced polyester braided hose, odorless and tasteless, non-toxic, free from phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products under higher pressure. Smooth, non-porous inner surface of the hose eliminates the problem of product particle settlement and bacterial growth. Resistant to alkaline cleaning agents. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Possible sterilization with ethylene oxide. After installing fittings with appropriate hygienic design, cleaning by CIP method is possible. Full hose roll length 15 m (from internal diameter 38.1 mm - 6 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). Inner layer made of black, smooth NBR/PVC rubber blend. Reinforced with layers of durable synthetic cord and steel spiral. It has copper wires ensuring electrical continuity between the hose ends – provided that it is properly connected to the fittings. Outer layer made of CR chloroprene rubber, flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 / 27 / 30 / 35 bar) available on special order, with specified breaking strength under tension (up to 2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: from 17 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of aviation fuel (jet fuel, kerosene, e.g., Jet A1) and petrochemical products containing up to 50% aromatic compounds, primarily for draining fuel from aircraft tanks, loading and unloading airport tankers and fuel dispensers. The outer layer is antistatic, abrasion-resistant, oil-resistant, and weather-resistant. It features copper wires ensuring electrical continuity (R < 100 Ω) between the hose ends and dissipation of electrostatic charges. Compliant with requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong suction-discharge hose for aviation fuel, intended for filling and emptying aircraft tanks, loading and unloading airport tankers and fuel dispensers. As a hose without metal components, it can be used for direct filling and emptying of aircraft tanks. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord and a polymer spiral (PET). Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer ensures the required low resistance of the hose between the ends (10^3 Ω < R < 10^6 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters and hoses with fluorescent markings visible at night are available upon special order. Inner layer: black NBR rubber. Reinforcement: synthetic cord, PET spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHyperline FX SS AS SI WHITE hose is a lightweight, flexible Teflon hose. Due to its properties, it is recommended for the transfer of hot media and CIP applications. The hose can be supplied by the meter or as complete assemblies. The outer layer made of white silicone facilitates cleanliness maintenance. This solution also protects the operator from burns. High resistance of the inner layer to prolonged exposure to steam. At operating temperatures above +160°C, the maximum working pressure specified in the technical data should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 180°C, the maximum working pressure for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. The specified value of vacuum is defined for operating temperatures up to 150°C. The hose is standardly available in an antistatic version and is also available in a natural PTFE version. Hose material: smooth inside, corrugated outside, antistatic PTFE (Teflon). Reinforcement: single braid of AISI 304 steel with an additional protective layer of white silicone rubber. Working pressure: from 50 bar to 110 bar - depending on the hose diameter. Operating temperature: from -70°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE V (VISIFLON) hose features an inner layer made of high-quality corrugated PTFE, providing exceptional flexibility and vibration resistance. It has a polypropylene fiber braid characterized by low weight and high chemical resistance. At operating temperatures above +80°C, the maximum working pressure should be reduced by 5% for each 1°C increase in temperature. For example, at a temperature of 90ºC, the maximum working pressure for the hose AF-VFPB-19 is: 16 bar – (90°C-80°C) x 5 = 16 bar – 50% = 8 bar. There is an option to order a version with a black polymer braid (version PBB), with similar characteristics to version PB, for applications where bright colors cannot be used. Available versions: standard (orange) and antistatic (black). The antistatic Teflon of version AS contains evenly distributed carbon in the PTFE and has a resistance R <108 Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. Hose material: spiral corrugated PTFE (Teflon). Reinforcement: polypropylene braid. Working pressure: from 12.5 bar to 30 bar - depending on the hose diameter. Operating temperature: from -30°C to +100°C. Resistant to full vacuum up to a temperature of: +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystal-clear, flexible hose free of odor and taste, non-toxic, phthalate-free, and BPA (Bisphenol A) free. Designed for the transfer of milk and dairy products, used in milking equipment. The smooth, non-porous inner surface of the hose eliminates the problem of fat deposition, product particles, and bacterial growth. The built-in blue tape on the hose wall assures the customer of receiving the original TYGON® S3™ M-34-R hose, specifically designed for transporting raw milk. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, 3-A, Japanese MHLW370(3-D). Cleaning by rinsing according to a special procedure. Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Full hose roll length: 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with magnetic base and valve for coolant supply - system 1/4". Components: 20 segments (L=300 mm), flat nozzle 1", valve with external thread 1/4" BSPT, and magnetic base with "tail" for 1/4" hose (end thread size 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose supplied as a ready-made pipe, in various lengths, with mounted fittings, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. The hose is used for emptying septic tanks and portable toilets, in construction, tourist facilities, marinas, and airports. Available lengths: from 10 m to 25 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose supplied as a ready-made pipe, with mounted fittings, clamp, and rope, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. Short sections of hose, 1 m in length with fittings, are used as protective hoses, resting on the edge of the channel opening, inside which a pressure cleaning hose or inspection hose with a camera is introduced. The clamp mounted on the fitting with an attached 7.5 m rope allows for maintaining the proper position of the protective hose. Length: 1 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar. Operating temperature: from -40°C to +60°C.
