Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. Mainly used in harsh conditions for sampling, flow shut-off, and testing stations. Standard with a V-type stem (valve operation close - open). Each valve is factory tested. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing seal: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: NPT female.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. It features a compact design with a relatively high flow rate. Version with a regulating stem. Each valve is factory tested. The valve has a special design allowing for panel mounting without the need to disassemble the needle, thus preserving the Manufacturer's warranty. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing sealing: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. Mainly used in harsh conditions for sampling, flow shut-off, and testing stations. Standard with a V-type stem (valve operation close - open). Each valve is factory tested. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing seal: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: BSP female thread.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. It features a compact design with a relatively high flow rate. Standard with a V-type stem (valve operation close - open). Each valve is factory tested. The valve has a special design allowing for panel mounting without the need to disassemble the needle, thus not voiding the Manufacturer's warranty. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing seal: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLong nipple with external NPT thread, type 113H, for pipe connections primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal and external NPT threads, type 116H, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT, BSPT, BSP threaded coupling and reducing coupling with NPT thread, intended for pipe connections mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal NPT thread, type 100H, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHex socket plug with external NPT thread, type 107H, for threaded fittings primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT threaded tee, type 101HM, intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure two-way shut-off ball valve designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Pneumatic actuated valves available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (option PCTFE, PEEK). Working pressure (dependent on temperature/seal material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on seal material - see chart): from -34°C to +210°C (modified PTFE). Connection: BSPT. NOTES! Ball valves are designed to operate in fully open or fully closed positions. Valves have factory-adjusted packing seal for 70 bar pressure. Due to varying operating conditions, periodic adjustment of the stem sealing may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal plug with external thread NPT, BSP, BSPT, UNF, and UN, for threaded couplings primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The plug with UNF and UN thread is equipped with an O-ring seal. Material: AISI 316 steel. Seal: FKM 90 O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: BSP female thread.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with external NPT thread, type 100HM, intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: inch LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT threaded tee, type 101H, intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: GW NPT.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: BSPT female thread.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT threaded tee, type 102H, intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT external threaded hose end, type 130HM, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality high-pressure two-way shut-off ball valve designed for precision instrumentation for the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipe or panel mounting. The valve features high sealing integrity (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Pneumatic actuated valves available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar respectively. Body material: AISI 316 steel (ASTM A351 CF8M, casting) - for the 206 bar version; AISI 316 steel (ASTM A-276, forging) - for the 413 bar version. For the low-pressure version (206 bar), a brass version is available. Ball material: AISI 316 steel. Lever material: nylon, brass insert; standard lever color is black (other colors available, metal lever, lever with padlock ISLT). Ball and stem sealing: modified PTFE (PCTFE, PEEK option). Working pressure (dependent on temperature/seal material - see chart): up to 206 bar (modified PTFE). Operating temperature (dependent on seal material - see chart): from -34°C to +210°C (modified PTFE). Connection: BSP thread. NOTES! Ball valves are designed to operate in either fully open or fully closed positions. Valves have factory-adjusted packing seal for 70 bar pressure. Due to varying operating conditions, periodic adjustment of the seal may be required using the stem sealing screw (after removing the lever). Preliminary adjustment is recommended before starting the installation by tightening the sealing screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless precision tubes made of stainless steel AISI 316/316L, cold drawn, annealed. Designed for pressure installations of liquids and gases, hydraulic power systems, and control-measurement instrumentation installations. Precision with strict tolerances for outer diameter and wall thickness, as well as controlled mechanical and technological properties of the material (certificate 3.1 according to EN-10204) ensure applicability in the most critical installations. The stated working pressure is the theoretical pressure according to EN 13480-3. Material: EN 1.4435, ASTM TP 316L. Standard tube length (one section): 6 m (shipping in sections of 1 m, 2 m, or longer upon agreement of transport costs).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket QC4 compliant with Instrumentation Standard, with valve, with external thread NPT, BSPT or BSP. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for tightness. Interchangeable with Instrumentation standard quick couplings from other manufacturers. Material: AISI 316 steel. Working pressure: 206 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket QC4 compliant with Standard Instrumentation with valve, with LET-LOK® connection, for panel mounting. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for leaks. Interchangeable with Instrumentation standard quick couplings from other manufacturers. Material: AISI 316 steel. Working pressure: 206 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQC6 quick coupling plug compliant with Standard Instrumentation, with external thread NPT, BSPT, or BSP. QC6 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for tightness. Interchangeable with Instrumentation standard quick couplings from other manufacturers. The plug is available in versions without a valve and with a valve. Material: AISI 316 steel. Working pressure: 103 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQC4 quick coupling plug compliant with Standard Instrumentation, with LET-LOK® connection. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratories. All quick couplings are factory tested at a pressure of 68 bar to check for leakage. Interchangeable with quick couplings of Instrumentation standard from other manufacturers. The plug is available in versions without a valve and with a valve. Material: AISI 316 steel. Working pressure: 206 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQC4 quick coupling socket compliant with the Standard Instrumentation standard with a valve, featuring a LET-LOK® connection. QC4 is a high-quality quick coupling used in aviation, gas industry, medical, pharmaceutical, and laboratory applications. All quick couplings are factory tested at a pressure of 68 bar to check for tightness. Interchangeable with Instrumentation standard quick couplings from other manufacturers. Material: AISI 316 steel. Working pressure: 206 bar. Sealing: viton. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for QC4 and QC6 quick coupling socket compliant with Standard Instrumentation, with a tether. The blind plug is not designed to withstand pressure. It protects plugs and sockets from contamination and damage when the quick coupling is disconnected. Size: 1/4", 3/8". Material: AISI 316 steel. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for quick coupling QC4 and QC6 compliant with Standard Instrumentation, with a tether. Size: 1/4", 3/8". The cap is not designed for pressure transfer. Protects plugs and sockets from contamination and damage when the quick coupling is disconnected. Material: AISI 316 steel. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° fitting type LET-LOK® for metric tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLET-LOK® type tee fitting for connecting inch tubes, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tube (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector type LET-LOK® with external NPT thread for inch tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Available in a full-bore version - often used for thermocouple installation, with a bore diameter reamed to the tubing diameter (marked ...-TC at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° fitting type LET-LOK® with external NPT thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure of the fitting is determined based on the specific size and type of threaded connection (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector type LET-LOK® with external BSP thread for inch tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The permissible working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Available in a full-bore version - often used for thermocouple installation, with a bore diameter reamed to the tubing diameter (marked ...-TC at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° fitting type LET-LOK® for inch tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® with external BSPT thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® with internal BSP thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The permissible working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling type LET-LOK® with external NPT thread for metric tubing, primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLET-LOK® type tee fitting for metric tubing intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The allowable working pressure is determined based on the outer diameter and wall thickness of the tubing (details in the attachment). Material: AISI 316 steel.
