Strong, specialized drag hose for farmers designed for natural fertilization in crop production (manure and slurry fertilization). Used in comprehensive slurry spreading systems, including spreaders. In these solutions, the slurry is pumped using a hose from the tank to dispensers/tanks mounted on the tractor and then spread directly onto the soil surface. Extremely durable and long-lasting due to high-quality materials and construction. Reinforced with a circumferentially woven high-strength polyester braid bonded and surrounded by polyurethane in the original hot thermoplastic polyurethane extrusion process through braiding. Due to its high resistance to tensile stress, abrasion, punctures, weather conditions, UV radiation, and small bend radius, it is widely used for field fertilization. Also available in other versions: DRAGMAN EXTRA (with increased breaking strength), DRAGMAN PREMIUM (with increased abrasion resistance), and in longer lengths. Maximum working pressure for temporary use established according to a safety factor of 2:1 approved by the manufacturer (only for water and safe, non-flammable liquids). For maximum longevity, it is not recommended to exceed 1/3 of the bursting pressure and the specified breaking strength. Standard roll length: 200 m. Hose material: orange polyurethane (PU) pressed into high-strength polyester braid during hose extrusion. Working pressure: from 15 bar to 22.5 bar - depending on hose diameter and temperature. Operating temperature: from -50°C to +65°C.

Rectangular corrugated hose reinforced with a steel spiral, for hot water and antifreeze fluids, intended for automotive and industrial cooling systems. It has vacuum resistance. Inner layer resistant to heat and cooling fluids. Outer layer resistant to overheating, oil, and aging. Inner layer: black CR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: up to 4 bar. Operating temperature: from -40°C to +100°C.

Extremely lightweight, flexible water delivery hose designed for internal fire protection of buildings. The inner layer is made of high-quality synthetic rubber. The outer layer consists of a strong, dense polyester braid reinforced with a thin, tightly wound PET spiral. The hose is used in internal hydrant cabinets with a length of 20 m to 30 m of hose wound on a drum (reel) with a nozzle mounted at the end of the hose. Compliant with EN 694 standard for fire hoses (type B class 5). In the field of fire protection (Poland), it has a CNBOP-PIB compliance certificate. It can also be used in industry - for seawater, industrial water, and some light diluted chemicals, as well as for air, dust, and light solid particles. It is not intended for use in harsh external conditions. Installation with clamps or crimping sleeves on ends with smooth, sharp-free fittings to avoid cutting the inner layer. Inner layer: smooth synthetic rubber. Reinforcement: polyester braid with a reinforcing spiral (thread) PET. Working pressure: from 7 bar to 12 bar - depending on the hose diameter. Operating temperature: from -20°C to +60°C.

Lightweight, highly flexible compressed air hose with good resistance to mineral oils. Very abrasion-resistant. The yellow color ensures excellent visibility of the hose. The hose has a thickened outer layer every 20 m, marked on the hose ("TAGLIO / CUT"), and it is recommended to cut the hose and install fittings at these points. This reinforces the fitting installation area and makes it more resistant to bending. From a 60 m roll, three 20 m hoses with fittings can be made. However, it is also possible to use the hose with fittings installed in non-thickened areas. The hose is used for pneumatic hammers and drills. Inner layer: black PVC/NBR blend. Reinforcement: double polyester braid. Outer layer: black or yellow PVC/PU blend. Working pressure: 20 bar - dependent on temperature. Operating temperature: from -10°C to +60°C.

Flexible suction hose supplied as a ready-made pipe, with mounted fittings, clamp, and rope, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. Short sections of hose, 1 m in length with fittings, are used as protective hoses, resting on the edge of the channel opening, inside which a pressure cleaning hose or inspection hose with a camera is introduced. The clamp mounted on the fitting with an attached 7.5 m rope allows for maintaining the proper position of the protective hose. Length: 1 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar. Operating temperature: from -40°C to +60°C.