Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for the removal of dust, wood shavings, chips, and lightweight abrasive bulk materials. Used in the woodworking, construction, and food industries. Ozone resistant. Wall thickness is measured between the spiral. Other diameters available in the range of 30 ÷ 400 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated steel wire spiral. Operating temperature: from -40°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose for pneumatic transport of dry abrasive substances. Thick inner layer made of polyurethane, with very high abrasion resistance (below 36 mm³ according to DIN 53516), very smooth and with a low friction coefficient, allowing the conveyed product to slide. Two built-in copper wires that, when grounded (connected to a grounded end), discharge electric charges. The outer layer is corrugated, made of black, antistatic (R<10^6Ω) SBR/NR rubber resistant to abrasion, ozone, and aging. The hose is designed for the transport of dry, highly abrasive substances, particularly in foundries, welding shops, the ceramic industry, construction, and woodworking. Installation: The hose is intended for installation using the GHIBLI system - aluminum half-flanges PN10 applied externally to the hose. Inner layer: special polyurethane (PU). Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NR rubber. Working pressure: from 3 bar to 10 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C (temporarily up to +100°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end with internal thread, type FACR, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical "Y" tee KTSBY designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and pliable, chemically resistant hose designed for the discharge of aggressive chemical vapors, gases, dust, and fibers. Mainly used in the chemical industry and, among others, in asbestos removal. Very good chemical resistance to solvents and other aggressive vapors. Resistant to hydrolysis and biological corrosion. Free from halogen compounds and plasticizers. Characterized by high compressibility - up to 1:8, strong construction, and impact resistance due to the external spiral. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: polyethylene fabric coated with polyethylene (PE). Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose for pneumatic transport of dry abrasive substances. Special hose design with exceptional abrasion resistance. The inner layer is smooth, made of black antistatic natural rubber with embedded alumina (Al2O3) ceramic beads, a material with high hardness. Built-in copper wire that, when grounded (connected to a grounded end), dissipates electric charges. The outer layer is made of black antistatic (R<106Ω) SBR/NR rubber resistant to abrasion and aging. The hose is intended for the transport of dry highly abrasive substances: e.g., dry cement, coal, coal dust, coke, solid fuels from secondary raw materials, minerals, ceramic powders, steel shot, glass shards, fiberglass. Used in steel mills, coking plants, power plants, cement plants, mines, glassworks, abrasive material factories, and insulation material factories. The advantage is the long lifespan of the hose in these applications – a traditional abrasion-resistant rubber hose may last only a few days, while the ALUSPHERE hose can last several months under the same conditions. Inner layer: ceramic beads embedded in black NR rubber. Reinforcement: synthetic cord. Outer layer: black SBR/NR rubber. Working pressure: 12 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight crimped tube end, type EP, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and extremely flexible rubber hose for dust extraction, powders, and other lightly abrasive materials. The inner layer is smooth, made of wear-resistant rubber with a thickness of 2.4 mm. The outer layer is corrugated, resistant to abrasion and weather conditions. Thanks to the steel spiral reinforcement, it is resistant to kinking and vacuum up to 0.6 bar. Not intended for use with positive pressure, designed only for vacuum (extraction). Due to its lightness and exceptional flexibility for a rubber hose, it performs excellently in vacuum cleaning systems in the industry, such as in quarries or foundries. It features a copper anti-static wire for discharging electric charges. Inner layer: black natural rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Vacuum: up to 0.6 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane hose, reinforced with a steel wire spiral, designed for the discharge and transport of bulk materials, powders, and sawdust. Ozone resistant. Hose material: transparent polyurethane. Reinforcement: galvanized steel wire spiral. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAsymmetrical straight reducing coupling KRA designed for quick and efficient assembly of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft PVC ends designed for the SUPERELASTIC hose. Also available are polyethylene T and Y couplings mounted inside the hose. Color black. Operating temperature from 0ºC to +70ºC (temporarily up to +80ºC).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with internal thread, type FACP, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for sandblasting. Thick inner layer made of rubber with very good abrasion resistance (50±5 mm³ according to ISO 4649 / DIN 53516). The inner and outer layers are antistatic, preventing the accumulation of electric charges. Used for sand and steel shot in abrasive blasting of steel structures, castings, concrete surfaces, etc. Commonly used in the metal and shipbuilding industries. Fitted with special nozzles for sandblasting. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord. Outer layer: black NR/SBR rubber. Working pressure: 12 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd made of soft plastic, designed to be screwed onto an EVA hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with external thread, type MACP, for Teflon brake hoses (internal cone seal). Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSponge ball for cleaning hoses intended for concrete pouring. Type of structure: soft, medium, hard.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO side crimp fitting 45° for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose coupling clamp for SPIRAFLEX hoses with end rings. Made from PVC profile, with a galvanized steel tension wire. Lock with a galvanized steel lever. Width approximately 60 mm. Provides quick connection and disconnection of SPIRAFLEX hose sections, easy construction of air supply and ventilation lines in field conditions. Available on request in many other sizes ranging from DN150 to DN1200.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety pin for the groove joint clamp. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end BURGACLIP with internal UNF thread, for 3090 type air conditioning hose. Allows for the connection of rubber hoses with components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 45° crimp fitting for PTFE brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° Tee KTSB 45 designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO side crimp fitting 15° for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and thick suction-discharge hose designed for the transport of bulk abrasive substances such as powders, cement, granules, abrasives, etc. Externally corrugated, internally smooth. The inner layer is made of abrasion-resistant polyurethane. It features good resistance to external impacts and harsh operating conditions. Resistant to UV radiation and low temperatures. The hose has a copper wire covered with polyurethane arranged alongside the spiral, which, when grounded (or connected to a grounded end), dissipates electric charges. Used in industrial installations, for handling, in construction, and in shipbuilding. Inner layer: blue polyurethane. Reinforcement: hard PVC spiral. Hose material: gray and purple PVC. Working pressure: from 5 bar to 6 bar - depending on the hose diameter and temperature. Vacuum: up to 0.9 bar. Operating temperature: from -20°C to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP tube end with internal UNF thread, for hose type 3090 for air conditioning. Allows for the connection of rubber hoses to components of the air conditioning system. Clips and clamps are available as a separate assortment. Material: steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable clamp with lever for groove connection without gasket and safety pin. Material: carbon steel. Working pressure: 85 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo connection bolt, designed for securing brake lines. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP stainless steel clamp for hose end type 3090 for air conditioning.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for the groove joint clamp. Material: SBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - type "T" tee BURGACLIP for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBURGACLIP stabilization clip made of blue plastic, for hose end type 3090. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, smooth, flat-wound hose designed for the discharge of bulk materials. Particularly used in installations exposed to vibrations and mechanical damage. Suitable for contact with food and in the pharmaceutical industry, being tasteless and odorless, in compliance with FDA requirements (21CFR177.2600). It is not subject to hydrolysis and is resistant to microbes. Also resistant to mineral oils, aging, atmospheric factors, ozone, UV, and many chemicals. Hose material: transparent polyurethane. Working pressure: from 0.135 bar to 1.03 bar, depending on the hose diameter. Operating temperature: -40°C to +90°C (temporarily +125°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with R134 BURGACLIP valve for hose type 3090 for air conditioning. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring for freon for air conditioning fittings. Material: hydrogenated nitrile rubber (HNBR). Operating temperature: from -30°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose designed for the transport of petrochemical products with aromatic compound content up to 50%, fuels, for oil systems, lubrication, etc. Outer layer resistant to fuels, oils, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: black NBR/PVC rubber. Working pressure: 10 or 20 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube end with R134 HP (16 mm) or LP (13 mm) valve with internal UNF thread, for 3055 type air conditioning hose. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose designed for the transfer of liquid petrochemical products containing up to 30% aromatic compounds (excluding ester-based products). The outer layer is flame-retardant, manufactured according to ASTM C 542 standards, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, two steel spirals. Outer layer: black CR rubber. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° tube fitting with internal UNF thread, for hose for air conditioning type 3055. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe suitcase contains a set of various BURGACLIP fittings for hoses type BU-3090 in sizes DN 8, 10, 12, 16, covering the most common service cases. It consists of: 80 BURGACLIP clamp bands, 40 BURGACLIP stabilizing clips, 39 BURGACLIP fittings (straight, angled, with UNF threads, for compressors, type SAE, ORFS) and 80 HNBR o-rings.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose designed for hot oil in hydraulic systems under pressure up to 40 bar. The outer layer is made of blue synthetic rubber, self-extinguishing (in accordance with MSHA requirements), resistant to weather conditions. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: blue self-extinguishing synthetic rubber. Working pressure: 40 bar. Operating temperature: from -30°C to +130°C (temporarily up to +150°C).
