Strong and flexible suction and discharge hose for low-pressure parts of hydraulic systems, based on the requirements of standard SAE J517 100 R4. Used primarily as a suction and return oil hose. Designed mainly for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids and water with a temperature limit of +70°C. Suitable for the transfer of various liquid products from the petrochemical industry with low aromatic compound content. Not recommended for gasoline, diesel fuel, and oils based on phosphate esters. The inner layer is made of black, smooth, oil-resistant synthetic rubber. The reinforcement consists of synthetic cord layers and a steel spiral providing high resistance to vacuum and very good flexibility of the hose without kinking. The outer layer is made of black synthetic rubber, resistant to abrasion, weather conditions, and light oil exposure. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.

Flexible, soft rubber hose with an external textile braid, primarily intended for fuel installations of leaded and unleaded gasoline as well as diesel oil for small vehicles (cars, motorcycles, mopeds, garden tractors) or industrial equipment. Installed, for example, between the fuel pump and the carburetor. Not suitable for engines with fuel injection systems. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379 type B (03/1982). The inner layer is made of smooth black NBR rubber. The external textile braid vulcanized with rubber reinforces the hose and protects against contact with hot components. The maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40°C; for diesel oil: +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external black textile braid. Working pressure: 10 bar. Operating temperature: from -35°C to +120°C (temporarily), maximum operating temperature depends on the medium.

Flexible, soft rubber hose with an external braid made of galvanized steel, intended for gasoline and petroleum-based oils such as gear oil, heating oil, and diesel. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth, black NBR rubber. The external reinforcing braid made of galvanized steel ensures high pressure resistance. Hose material: black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 6 bar to 25 bar - depending on the hose diameter. Operating temperature: from -35°C to +90°C (temporarily 110°C).

Lightweight, extremely flexible and pliable PVC hose with a small bending radius, featuring an internal layer of polyurethane (PU, polyester-polyurethane). Due to the good chemical resistance of polyurethane, the hose can be used for gasoline, unleaded gasoline, oils, petroleum products, and many solvents. Suitable for compressed air, including oiled air. Due to the good abrasion resistance of polyurethane, it can also be used for conveying moderately abrasive powders or granules. However, it is not recommended for acids, bases, and aqueous solutions at temperatures above 40ºC. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). The hose is widely used in all areas of industry. Also used in agriculture for agricultural spraying (insecticides, pesticides, herbicides, etc.). Used for compressed air for pneumatic tools, spray guns, painting, sandblasting, etc. The outer layer is resistant to hydrocarbons and solvent mists. Suitable for mounting on reels. Inner layer: transparent polyurethane (PU). Reinforcement: polyester braid. Outer layer: black PVC. Working pressure: from 12 bar to 20 bar, depending on the hose diameter and temperature. Operating temperature: from -15°C to +60°C.

Flexible, highly flexible hose for the transmission of gasoline and diesel fuel, fire-resistant, for small vessels - recreational boats up to 24 m in length. Hose with a working pressure of 10 bar, produced using a core method. Designed for fuel installations of stationary engines on ships, motorboats, yachts, etc. Suitable for unleaded gasoline, gasoline with up to 10% ethanol (E10 gasoline), diesel fuel, and diesel fuel with 10% FAME esters (B10 - biodiesel). Compliant with ISO 7840 type A1 (fire-resistant, fuel vapor permeability less than or equal to 100 g/m²/24 h), compliant with directive 94/25/EC, certified by RINA, compliant with SAE 1527, USCG type A1. Inner layer made of black, smooth synthetic rubber, resistant to oils and fuels with up to 50% aromatic hydrocarbon content. Reinforced with layers of synthetic cord, and for the POSEIDON LL hose, additionally with a steel spiral. Outer layer made of black, self-extinguishing synthetic rubber, resistant to oil and weather conditions (fire resistance: ISO 7840 Annex A: hose filled with fuel should withstand flame for 2.5 min). POSEIDON: The POSEIDON hose is a soft pressure hose without reinforcement with a steel spiral. The manufacturer recommends installing POSEIDON hoses with a diameter of over 19 mm in straight sections or with a gentle (large) bend radius. The hose is particularly used in the fuel tank filling installation of boats. POSEIDON hose with smaller diameters of 6, 8, 10, 13, 16, and 19 mm, with a working pressure of 10 bar, is available on special order. POSEIDON LL: The POSEIDON LL hose additionally has reinforcement with a steel spiral, providing resistance to vacuum and kinking. The hose is very flexible, with a minimum bend radius corresponding to just three times the inner diameter and can be easily installed in tight spaces of the boat's engine compartment. Its versatility and high quality make it frequently used by manufacturers of larger motor yachts. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord (POSEIDON); synthetic cord, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: from -30°C to +100°C.

Reinforced rubber hose with a galvanized steel braid providing high pressure resistance, perfectly suited for oil installations in small vehicles, fuel systems, and industrial equipment. Designed for gasoline and petroleum-based oils such as gear oil, heating oil, or diesel. The inner layer made of NBR rubber combined with a mesh braid makes the hose both soft and flexible. The maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbons: +40°C; for diesel: +80°C; for water and coolant liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Inner layer: smooth, black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 20 bar to 25 bar - depending on the hose diameter. Operating temperature: from -35°C to +90°C (maximum operating temperature depends on the medium).