Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible water hose designed for winding on reels. Intended for use in high-pressure firefighting equipment and fire trucks (booster hose). The inner layer is resistant to extinguishing agents and foaming agents. Reinforcement made of a thick layer of high-strength cord. The outer layer is weather-resistant. The CHICAGO EN hose differs from the basic version of the CHICAGO hose by being manufactured in accordance with standard EN 1947: 2014 (type C, class 1, category 2), while the CHICAGO EN GL is manufactured in accordance with EN 1947 but features a luminescent outer layer, allowing for easy visibility in darkness or smoke. Special versions of the hose compliant with standards ASTM C-542 and BS 3169 are also available upon request. Standard roll length: 60 m (120 m upon confirmation for the basic version of the hose). Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber (yellow luminescent synthetic rubber – GL version). Working pressure: 40 bar. Operating temperature: from -40°C to +100°C, from -20°C to +60°C (EN 1947).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible, and highly bendable hose designed for the discharge of chemically aggressive vapors and gases in all industrial sectors. Excellent chemical resistance, high temperature resistance. The hose features high compressibility and impact resistance due to the external spiral. Resistant to UV radiation, ozone, aging, weather conditions, and is flame-retardant. Other diameters available in the range of 50 ÷ 508 mm and a version with a stainless steel spiral. Hose installation on couplings with bridge clamps (left-handed). PTFE EL CL version - electrically conductive hose with resistance R ≤106 Ω, compliant with ATEX Directive 94/9/EC and standard TRBS 2153, made of black PTFE. Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: 3 or 6 m. Hose material: light brown glass fabric coated with Teflon (PTFE), thickness 0.12 mm - standard PTFE CL version, glass fabric coated with black conductive Teflon (PTFE), thickness 0.15 mm - antistatic PTFE EL CL version. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -150°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° PUSH-ON end fitting with internal BSP thread, type YBW310, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped using bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, AISI 316 steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the system 3/4" made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. Material: acetal. Working pressure: up to 1.4 bar. Maximum flow: 5182 l/hour. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for the transfer of dry or liquid abrasive substances, granules, etc. Externally corrugated, internally smooth. The inner layer is made of transparent, abrasion-resistant polyurethane. The hose features a copper wire arranged in a spiral, which discharges electric charges when grounded or connected to a fitting. Widely used in plastic processing in applications requiring greater resistance to abrasion, puncturing, and cutting of the hose. Particularly recommended for plastic regrind with relatively sharp edges. Inner layer: transparent polyurethane. Reinforcement: hard PVC spiral. Hose material: transparent PVC. Working pressure: from 3 bar to 7 bar - depending on the hose diameter and temperature. Vacuum: from 0.69 bar to 0.74 bar - depending on the hose diameter and temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically and thermally resistant two-layer hose designed for the discharge of the most chemically aggressive vapors, gases, dust, and fibers (non-abrasive), and for the blowing of hot air. Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). With an outer layer made of silicone-coated glass fabric and an inner layer of PTFE, the hose is resistant to temperatures up to 250ºC. The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, aging, weather conditions, and is flame-retardant. Used in the chemical industry, metallurgy, foundry, ceramics, and glass industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material inner layer: white PTFE Teflon film - standard version SILTEF, black conductive PTFE Teflon film - antistatic version SITEF EL. Hose material outer layer: silicone-coated glass fabric, silver-gray. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -50°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-ON end fitting with external BSP thread, type YBZ110, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to grip onto the grooves of the fitting. The fitting should not be used with other hoses or clamped with clamps or bands, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, brass, AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtremely lightweight, flexible water delivery hose designed for internal fire protection of buildings. The inner layer is made of high-quality synthetic rubber. The outer layer consists of a strong, dense polyester braid reinforced with a thin, tightly wound PET spiral. The hose is used in internal hydrant cabinets with a length of 20 m to 30 m of hose wound on a drum (reel) with a nozzle mounted at the end of the hose. Compliant with EN 694 standard for fire hoses (type B class 5). In the field of fire protection (Poland), it has a CNBOP-PIB compliance certificate. It can also be used in industry - for seawater, industrial water, and some light diluted chemicals, as well as for air, dust, and light solid particles. It is not intended for use in harsh external conditions. Installation with clamps or crimping sleeves on ends with smooth, sharp-free fittings to avoid cutting the inner layer. Inner layer: smooth synthetic rubber. Reinforcement: polyester braid with a reinforcing spiral (thread) PET. Working pressure: from 7 bar to 12 bar - depending on the hose diameter. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, and elastic hose designed for the extraction of hot fumes, gases, dust, exhaust gases, cooling air, and blowing. Used in all areas of industry for high-temperature applications, particularly in machine construction, vehicles, engine equipment, aerospace, and military applications. Resistant to temperature, flame-retardant, and very mechanically durable. Characterized by excellent compressibility, a very strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Other diameters available upon special request in the range of 50 to 508 mm. Hose installation on couplings with bridge clamps (left-handed). Standard length: 3 m (also available in lengths of 6 and 10 m upon special request). Hose material: aramid fiber fabric internally impregnated with silver-gray silicone, 0.4 mm thick, externally green-gray. Reinforcement: type CLIP - external spiral made of galvanized steel wire and sheet metal, left-handed. Operating temperature: from -60°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft suction hose, for larger diameters and small thicknesses almost flat at rest, intended for pneumatic transport of dry bulk materials. Inner layer made of black, smooth, antistatic rubber (R < 106 Ω), abrasion-resistant (70±5 mm3 according to ISO 4649, formerly DIN 53516). Reinforcement with synthetic cord. Outer layer made of antistatic (R < 106 Ω) abrasion-resistant rubber, weather-resistant and ozone-resistant. The hose is primarily used for the transfer of cement, sand, gravel, silica, and other dry abrasive materials from rail tankers, road tankers, and silos. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord. Outer layer: black NR/SBR rubber. Working pressure: from 5 bar to 6 bar - depending on the hose diameter. Operating temperature: from -40°C to +70°C. Indices marked at the end with the letters XE have an inner layer made of high-abrasion-resistant antistatic rubber (abrasion 50 mm3 according to ISO4649) and with a copper wire.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality steam gun meeting safety requirements for working with steam. Equipped with a swivel connection for the hose. Available with a wide range of accessories – various types of lances and nozzles. Used for washing and cleaning equipment, surfaces, floors, and defrosting external equipment with steam. The steam supplied to the gun via the hose is redirected inside the gun to a shut-off valve before flowing out through the lance and nozzle. The ergonomically designed trigger reduces the force required to open the valve. Releasing the trigger automatically cuts off the steam supply, preventing unwanted leakage and potential accidents. The special thermal insulation of the gun (perforated stainless steel shield on thermally resistant plastic bridges) eliminates the risk of burns. The gun handle can be easily reassembled on the opposite side for use by left-handed operators (not included with the gun and must be ordered separately!). The gun is standardly equipped with a swivel connection, preventing hose twisting during operation. The gun is often used with a specialized steam valve – available upon request. Configuration selection of the gun in contact with Tubes International. Material: stainless steel (main components), thermally resistant plastic. Sealing: PTFE with fiberglass. Working pressure: 10 bar. Operating temperature: up to +180°C (temporarily up to +210°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical 90° tee KTSB 90 designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-THU clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose for pneumatic transport of dry abrasive substances. Special hose construction with exceptional abrasion resistance. The inner layer is smooth, made of black antistatic natural rubber with embedded alumina (Al2O3) ceramic balls, a material with high hardness. Built-in copper wire that, when grounded (connected to a grounded end), dissipates electric charges. The outer layer is corrugated, made of black antistatic (R<10^6Ω) SBR/NR rubber resistant to abrasion and aging. The hose is designed for transporting dry highly abrasive substances: e.g., dry cement, coal, coke, solid fuels from secondary raw materials, minerals, ceramic powders, steel shot, glass shards, fiberglass. Used in steelworks, coking plants, power plants, cement plants, mines, glassworks, abrasive material factories, and insulation material factories. An advantage is the long lifespan of the hose in these applications; a traditional abrasion-resistant rubber hose may work for only a few days, while the ALUSPHERE hose can last several months under the same conditions. Installation: The hose is designed for installation using the GHIBLI system - aluminum half-flanges PN10 applied externally to the hose. Inner layer: ceramic balls embedded in black NR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NR rubber. Working pressure: from 8 bar to 10 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for thermoplastic and hydraulic hoses intended for high-pressure gases with internal thread G-3/4" (3/4" - BSP), connection according to PN-81/M-69229 (DIN477-1 no. 9). Application: oxygen, carbogen. Material: Material: AISI 304 steel - fitting, brass - nut.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp sleeve for OBHR type Teflon brake hose. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-TH clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - locking diameter. Diameter D3 [mm] - inner diameter. Material: AISI 304 or 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible rubber hose for suction and transport of sand, gravel, cement, and other abrasive materials. Also used in cleaning systems and removal of abrasive material after abrasive blasting. The inner layer is smooth, made of wear-resistant rubber with a thickness of 3 mm. The outer layer is corrugated, resistant to abrasion and weather conditions. Reinforced with a steel spiral, it is resistant to kinking and vacuum. Designed for both suction and pressure work. It features a copper anti-static wire for discharging electric charges. Inner layer: black or brown natural rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black NR/SBR rubber. Working pressure: from 2 bar to 3 bar - depending on the hose diameter. Vacuum: up to 0.9 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuite lightweight, flexible, and pliable, temperature-resistant two-layer suction hose designed for the discharge of vapors, smoke, and high-temperature air. Flame-retardant, resistant to hot sparks within a certain range. Used with furnaces and engines for the extraction of high-temperature gases in the metallurgical, ceramic, shipbuilding, aerospace, automotive, and military equipment industries. Characterized by high compressibility - up to 1:6, strong construction due to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used exclusively as a suction hose operating under vacuum, due to the possibility of gas permeation outside under pressure (degassing). Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layers of impregnated glass fabric with stainless steel fibers, gray. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -50°C to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, flexible, crush-resistant pressure hose designed for the transmission of hot, dry air from the compressor to the tank installation of the tanker. Used in road tankers for the transport of bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic cord. Outer layer: blue EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand crimping tool TNT250/B (six-jaw crimp) for air conditioning. The crimping head allows it to be passed through the hose, which is important when crimping angled ends. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector KN designed for quick and efficient assembly of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for thermoplastic and rubber hydraulic hoses for high-pressure gases with internal Whitworth thread W21.8 x 1/14" L (LEFT THREAD), connection according to PN-81/M-69229 (DIN477-1 no. 1). Intended for: among others, hydrogen, methane, other combustible gases. Material: AISI 304 steel - fitting, brass - nut.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped end with internal thread, type FALP, for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe aluminum tool case contains a complete set of tools necessary for the quick installation of air conditioning ducts using the BURGACLIP system. The set includes special pliers for installing BURGACLIP air conditioning clamps, equipped with a ratchet mechanism for easier use; a manual hose cutter designed for air conditioning hoses type BU-3090 in sizes DN 8, 10, 13, 16; and a dual-range manual cutting device for rubber and plastic hoses with an outer diameter of up to 42 mm, with the ability to pre-set the cutting blade for specific hose diameters of 6 mm and 26 mm. The blade shape allows for efficient cutting with minimal effort. An ideal solution for automotive workshops that provide services for repairing automotive air conditioning ducts.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible compressed air hose with good resistance to mineral oils. Very abrasion-resistant. The yellow color ensures excellent visibility of the hose. The hose has a thickened outer layer every 20 m, marked on the hose ("TAGLIO / CUT"), and it is recommended to cut the hose and install fittings at these points. This reinforces the fitting installation area and makes it more resistant to bending. From a 60 m roll, three 20 m hoses with fittings can be made. However, it is also possible to use the hose with fittings installed in non-thickened areas. The hose is used for pneumatic hammers and drills. Inner layer: black PVC/NBR blend. Reinforcement: double polyester braid. Outer layer: black or yellow PVC/PU blend. Working pressure: 20 bar - dependent on temperature. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant two-layer hose designed for the discharge of the most aggressive chemical vapors, gases, dust, and fibers (non-abrasive). Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE film. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, and aging. Used in the chemical and food industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material internal layer: white PTFE Teflon film - standard version PETEF, black conductive PTFE Teflon film - antistatic version PETEF EL. Hose material external layer: polyethylene fabric coated with polyethylene (PE). Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose for plastering. Inner layer made of rubber with good abrasion resistance (70±5 mm³ according to ISO 4649 / DIN 53516). Both inner and outer layers are antistatic to prevent the accumulation of electric charges. Multiple reinforcement with synthetic cord ensures high pressure resistance. Outer layer resistant to abrasion, weather conditions, and ozone. Used for spraying wet mortar: cement, plaster, and gypsum in construction work. Commonly used with plastering machines. Fitted with special ends for plastering. The NIAGARA LIGHT hose is an economical version with a slightly thinner wall (marked with the letter "L" at the end of the index). Standard length: 60 m and 40 m LIGHT version (or 120 m - contact Tubes International). Inner layer: black SBR/NR rubber. Reinforcement: synthetic cord. Outer layer: black SBR/NR rubber. Working pressure: 40 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical straight reducing coupling KRS designed for quick and efficient assembly of suction hoses using BC worm bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° elbow (R = 1.5 x d) KSBB 45 designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for thermoplastic and rubber hydraulic hoses for high-pressure gases with internal Whitworth thread W21.8 x 1/14", connection according to PN-81/M-69229 (DIN477-1 no. 6). Intended for: among others: ammonia, argon, carbon dioxide, helium. Material: AISI 304 steel - fitting, brass - nut.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO 15° crimp fitting for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial hand pliers made of strong material designed for quick and easy installation of clamp bands for the BURGACLIP air conditioning system. Equipped with a ratchet mechanism for easier use. A functional tool that also works well in hard-to-reach places, such as the engine compartment of a passenger car. The pliers ensure the tightness and durability of the connection. An ideal solution for automotive workshops that provide services for repairing automotive air conditioning lines.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-TH clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - locking diameter. Diameter D3 [mm] - inner diameter. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the extraction or pneumatic transport of dry abrasive substances. The inner layer is made of white, smooth, abrasion-resistant rubber (80 mm³ according to ISO 4649, formerly DIN 53516), compliant with FDA 21 CFR 177.2600 requirements for food contact. Two built-in copper wires that, when grounded (or connected to a grounded end), dissipate electric charges. The outer layer is resistant to weather conditions and ozone. The hose is intended for the transport of dry food substances: grains, sugar, powders, feeds, granules, etc. (under FDA requirements) and other abrasive substances such as PVC granulate, for which a white, non-staining inner layer is required. Not intended for use in ATEX explosion hazard zones. Standards and requirements: food industry, food contact: 1935/2004/EC, 2023/2006/EC (GMP), BfR XXI cat.4. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: white NR/SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 6 bar to 8 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow (R = 1.5 x d) KSBB 45 designed for quick and efficient installation of suction hoses using BC screw bridge clamps. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO crimping end for Teflon brake hoses. Material: carbon steel, chrome-plated.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic pump MPT100 with manual drive intended for the crimping tool for air conditioning type TNT250/B. Height: 315 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAF-THU clamping sleeve for HYPERLINE SB, FX, V type PTFE hoses. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: AISI 304 steel.
